|
| 1 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor Size580x440mm. |
| 2 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall andfloor |
| 3 | P & F water closet Seat Covers with brass hinges complete Solid PVC (IS2548 marked) grade-I White. |
| 4 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittingsC.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall PVC with PVC bend and superiorinternal fittings as per IS : 7231 . |
| 5 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make withC.I. brackets duly painted 1 No. 15 mmC.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete includingcutting & making good the wall : Size 610 mm x 510 mm |
| 6 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor WVC Lab sink (IS:2556mark) size 530 x 430 x 180 mm |
| 7 | P& F waste Coulping with fittings ofapproved quality /make: C.P Brass 40 mm dia |
| 8 | P& F waste Coulping with fittings ofapproved quality /make: C.P. Brass 50 mm dia |
| 9 | P& F waste Pipe with all fitting P.V.C. with C.P. nut 40 mm dia |
| 10 | P& F waste Pipe with all fitting G.I(B class) 40 mm |
| 11 | Removing & Re fixing of P.V.C. Cistern fittings (Syphon, Ball cock & Handle Set) complete as per direction ofEnginner-in-Charge |
| 12 | Providing and fixing new spindle for Bib cock/pillar cock for repairing purpose to solve leakage and proper functioning oftap. |
| 13 | P & F G.I. pipes (Internal Work) withG.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors Concealed pipe in wall including painting with anticorrosive bitumen paint'B' Class 15 mm dia nominal bore |
| 14 | P & F G.I. pipes (Internal Work) withG.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors Concealed pipe in wall including painting with anticorrosive bitumen paint'B' Class 20mm dia nominal bore |
| 15 | P & F G.I. pipes (Internal Work) withG.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors Concealed pipe in wall including painting with anticorrosive bitumen paint'B' Class 25mm dia nominal bore |
| 16 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 'B' Class 25mm dia nominal bore |
| 17 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 'B' Class50mm dia nominal bore |
| 18 | P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approvedmake: C.P. Pillar cock, 15 mm dia nominal bore |
| 19 | P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approvedmake: Synthetic Material (PTMT) Pillar cock of approved quality / make 15mm nominal bore. |
| 20 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass bib cock,15mm nominalbore. |
| 21 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass Long body, 15mm nominalbore weight not less than 690 gm |
| 22 | C.P. Brass Elbow-action, 15mm nominalbore. |
| 23 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: Brass 400 gm. 15mm nominal bore. |
| 24 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: Brass 1350gm. 25 mm nominal bore. |
| 25 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.Not less than 600 gm, 25mm. |
| 26 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.Not less than 1200 gm 50mm. |
| 27 | Synthetic material (PTMT) of approvedmake 25 mm nominal size. |
| 28 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS :8931 marked) |
| 29 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. Synthetic Material (PTMT) Inlet connection of approved quality/make 15mm nominal size. |
| 30 | P & F 15 mm. Dia Connection Pipe of approved quality/make PVC pipe withC.P. Brass nuts upto length, 600mm. |
| 31 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make CP brass 20mm nominalbore. |
| 32 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15mm nominal bore. |
| 33 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 25mm nominal bore. |
| 34 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 50mm nominal bore. |
| 35 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)15 mm nominal size |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)25 mm nominal size |
| 38 | Labour Charges for Removing & Refixing the water Storage Tank of all sizes and including all Necessary fitting complete in all respect as per approved sample and direction of engineer incharge. |
| 39 | Providing and fixing superior quality PVC Tank Cover complete as perapproved by Engineer In Charge500 Lt. capacity |
| 40 | Providing and fixing superior quality PVC Tank Cover complete as perapproved by Engineer In ChargeAbove 500 Lt. capacity |
| 41 | P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size300 X 300mm. |
| 42 | P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.Trap size 225 X 150 mm, ferrow cement cover with frame Internal Chamber size450 X 450mm. |
| 43 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality/make including joining the pipe with solvent cement rubber ring andlubricant. 110 mm dia |
| 44 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality/make including joining the pipe with solvent cement rubber ring andlubricant. 160 mm dia |
| 45 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solventcement rubber ring and lubricant:Coupler (socket) 110mm dia |
| 46 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solventcement rubber ring and lubricant:Coupler (socket) 160 mm dia |
| 47 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solventcement rubber ring and lubricant:Bend 87 .5 110mm dia |
| 48 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solventcement rubber ring and lubricant:Bend 87 .5 160 mm dia |
| 49 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solventcement rubber ring and lubricant:Door Cap 110mm dia |
| 50 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solventcement rubber ring and lubricant:Pipe Clip 110mm dia |
| 51 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M |
| 52 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplusearth within a lead of 50 mtr.Inside size 450 x 450mm depth upto0.5 M Cement cover with frame |
| 53 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplusearth within a lead of 50 mtr.Inside size 600 x 450mm depth upto 0.5M Cement cover with frame. |
| 54 | Supplying and fixing C.I. Cover with frame, C.I. gratings for chambers & manholes. |
| 55 | Supplying and fixing Ferro- cement cover with C.I. frame for chambers & man holes of size. 500mm dia 22 Kg.-do-22 MT centre point load (Heavy duty). |
| 56 | Construction of Cement Concrete Chamber 125mm dia. C.P. Brassgrating |
| 57 | Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete.300mm dia |
| 58 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)( Excluding cost ofpipe) 300mm dia S.W. Pipe |
| 59 | Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing ofjoints etc. complete 300mm dia Internal |
| 60 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Powder coating aluminum ( minimum thickness of powder coating 50 micron) |
| 61 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). |
| 62 | For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Powder coating aluminum ( minimum thickness of powder coating 50 micron) |
| 63 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, TypeII conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on otherside. |
| 64 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight notless than 13.50 kg/sqm) |
| 65 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S.With stainless steel cover plate |
| 66 | Filling the gap upto 5 mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction ofEngineer-in-charge complete. |
| 67 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc.complete. |
| 68 | Providing and fixing aluminium U shape handle of size 100mm with SS screws etc. Complete as per direction of Engineer-in-charge Powdercoated minimum thickness 50 micron aluminium |
| 69 | S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights withall lead and lift with scafolding. |
| 70 | Providing and fixing Drapery rod shall be made of 20 gauge cold rolled steel strip, which is electrical resistance welded. The section will be available 25.4 mm diameter the section shall be coated with acid resistance polymer finish shall made from ABS material in nearest matching colour of rod. The ring shall be made from ABS material in nearest matching colour to rod.Brackets made of galvanized steel. |
| 71 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Powder coating aluminum ( minimum thickness of powdercoating 50 micron) |
| 72 | Labour Charges for removing and refixing Aluminium Partitions door including minorrepair on alteration in the same. |
| 73 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' 35 mm thick . CommercialVeneer both side |
| 74 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over itemno. 8.13. |
| 75 | Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineerin charge.0.8mm thick mica |
| 76 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessaryaccessories and screws etc. complete. |
| 77 | Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm |
| 78 | Repair of door, window shutters including cost of material and labour for change of damaged :Panel by Plain Glass Panes 4mm thick |
| 79 | Repair of door, window shutters including cost of material and labour for change of damaged :Aldrop of mild Steel 12\\" long x12mm dia |
| 80 | Repair of door, window shutters including cost of material and labour for change of damaged :Stopper of Aluminium with Double Rubber Gutka |
| 81 | Repair of door, window shutters including cost of material and labour for change of damaged :Door Springs of mild Steel |
| 82 | Repair of door, window shutters including cost of material and labour for change of damaged :Steel Hinges For Wooden Chowkhat 4\\" size |
| 83 | Repair of door, window shutters including cost of material and labour for change of damaged :Mild Steel Tower Bolt 6\\" long |
| 84 | Repair of door, window shutters including cost of material and labour for change of damaged :Style / rail of teak wood 30mm thick/ Aluminium Section 4\\"wide |
| 85 | Repair of door, window shutters including cost of material and labour for change of damaged :Style / rail of teak wood 30mm thick/Aluminium Section 6\\" wide |
| 86 | Removing aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 87 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead Of areaexceeding 3 square meter. |
| 88 | Providing & Fixing decorative veneer of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 6.0mm thick veneer |
| 89 | Labour charges for repair to door / window without using any material such as applying randha (finishing) tighteningof bolts & screw etc. |
| 90 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge ofwelding meachine and TP etc complete |
| 91 | Taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meters lead Of area exceeding 3 squaremeter. |
| 92 | Providing and fixing Square bars or other flat welded to window, ventilators etc. |
| 93 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Two or more coats on new work |
| 94 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work One or more coats on old work. Please Enable Macros to View BoQ information |
