|
| 1 | Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified. |
| 2 | Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified. |
| 3 | Taking down shutters of any description exc 1 sqm and n .exc 2 sqm each and removing to or from stors etc complete all as specified & directed. |
| 4 | Taking down shutters of any description like aluminium doors/windows, steel windows and wooden doors etc of size exc 1 sqm and n .exc 2 sqm each and refixing in same opening after necessary cutting, adjusting, repairing, easing, resecuring and fit to working condition for use etc complete all as specified & directed. |
| 5 | Supply and Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45mmx70 mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 508 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixed in position With MS hold Fast /SS Dash Fastner incl Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with CM 1:4 complete all as specified. |
| 6 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat with single rebate of Size 65mm x 100 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with CM 1:4 complete all as specified. |
| 7 | Supply and Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat with double rebate of Size 65mmx125 mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 508 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixed in position With MS hold Fast /SS Dash Fastner including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with CM 1:4 complete all as specified. |
| 8 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixing and incl 02 Nos (per Leaf) SS 150mm long Tower Bolt, 02 Nos (per Leaf) SS 150mm long handle and 01 No (per Leaf) SS 300mm long sliding door bolt as specified. |
| 9 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixing and incl 02 Nos (per Leaf) SS 150mm long Tower Bolt, 02 Nos (per Leaf) SS 150mm long handle and 01 No (per Leaf) SS 300mm long sliding door bolt as specified. |
| 10 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) glazed and skeleton shutters of 35mm size open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixing and incl 02 Nos (per Leaf) SS 150mm long Tower Bolt, 02 Nos (per Leaf) SS 150mm long handle as specified. |
| 11 | S&F for Prepainted pressed steel frames of size 105 X 60 mm for door frames with one or more rebates including necessary supply and fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 12 | S&F for Prepainted pressed steel frames of size 125 X 60 mm for door frames with one or more rebates including necessary supply and fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 13 | S&F for Prepainted pressed steel frames of size 75 X 60 mm for Cubboard frames with one or more rebates including necessary supply and fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 14 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed. |
| 15 | M&L Pressed steel shutter for cupboard with sheet thickness not less than 1.2 mm made to shape with and including locking arrangement, handles, hinges and one shop coat painting complete all as specified. |
| 16 | M&L Providing and fixing factory made uPVC white colour casement (Openable) window /ventilator made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), Butt Hinges of 'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and Wire mesh and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 17 | M&L Providing and fixing factory made uPVC white colour Sliding window three track made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm) sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +– 0.2mm thick, galvanized steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: Touch lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and Wire mesh and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 18 | M&L Providing and fixing factory made uPVC white colour fixed window /ventilator made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 19 | S&F Steel windows with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded complete all specified. |
| 20 | S&F Steel ventilator with top hung shutters including hinges , steel peg stay, complete all specified. |
| 21 | Supply & Fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 22 | Supply & Fix 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed. |
| 23 | Supply & Fix 150 mm long Aluminium anodised,handle of extruded section cast type anodised and fixed complete all as specified and directed. |
| 24 | Supply & Fix 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 25 | Supply & Fix 250 mm long Aluminium alloy ,anodised sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixed bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 26 | S&F stainless steel wire cloth 0.56 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple. |
| 27 | S&F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple. |
| 28 | M & L sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames |
| 29 | All as per item No. 28 above but 4 mm thick pin head type, figured glass |
| 30 | M & L sheet glass ordinary quality 3 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames and including hacking out old broken glass of any description. |
| 31 | S&F steel rolling shutters 1.25mm thick lathing, with ball bearing as specified including top cover, anchoring rod, hasp and staple, guide channel and one shop coat of primer, gear operated type with bevel gear box and crank handle, erected in position as indicated complete and including taking down of old rolling shutters all as specified and as directed. |
| 32 | S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 33 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portion) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gap at junctions, ie at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, CP brass/stainless steel screws, all complete as per architechural drawings and directions of Engineer-in-charge. |
| 34 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, 03 Nos hinges in each leaf, one aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet or one mortice lock in each door, aluminium snap beading, screws, including taking down of old shutter of any description and any size complete all as specified. |
| 35 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15 of approved design and pattern with approved standard section and fixed to existing window frame with cp brass and stainless steel screw @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handle and fixing approved anodised aluminium standard section around the opening all complete as per requirement and directions of Engineer-in-charge. |
| 36 | S&F in repair, Door closure hydraulically regulated, designation No 3, aluminium (die cast) body, universal type, suitable foe door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified. |
| 37 | S&F in repair brass mortice lock, 4 Levers, verticle type of 100mm size all as specified. |
| 38 | M&L for 18/19mm thick prelaminated particle board , interior grade prelaminated one side with decorative choice lamination,& other side balancing white lamination, fixed with screws to aluminium frame work all as specified and directed. |
| 39 | S&F for tinted glass of selected quality, 5 mm thick and glazing with aluminium beading in aluminium door, partition and window shutter all as specified and directed. |
| 40 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified. |
| 41 | Supply and fixing in repair, mild steel 300mm ordinary rat tail rod pattern spring including roller and roller plate and fixing to frame with steel screw complete all as specified and as directed. |
| 42 | Supply and fixing stainless steel curtain rod 25mm dia, wall thickness of pipe not less than 16 guage and grade SS 304, including brackets and pair of decorated end knobs (finials), stop roller etc. as per site requirement, fixed to wall with fixing accessories, including taking down old existing curtain rods any type or condition complete all as specified. |
| 43 | Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting, cleaning and extra polishing if required and Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish) complete all as specified. |
| 44 | S&F 12mm thick toughned glass door/partition of approved colour , design and logo (if required any type) side opening type or sliding type , single shutter/double shutter/tripple shutter fixed type etc with complete fittings of approved make including pivot hinge, stainless steel chromium plated 450mm to 600mm length handle fancy type (for doors) , locking device with duplicate key, spenders partitions fixing rods/clits, two track or three track channel, rollers as required and other fittings if required etc and connecting jobs like tile cutting, demolition PCC, tiling, marble , plastering and painting etc to make site good complete including taking down old door of any pattern and any size. Note :- All the fittings will be approved by GE/Engineer-in-charge before work started) complete all as specified. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing serviceable tiles to store and rubbish off the premises etc complete all as specified. |
| 46 | M&L anti slip coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors and Skirting etc. including 10mm thick bedding layer in CM 1:4 using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and as directed. |
| 47 | M&L glazed ceramic coloured tiles of approved quality in vertical surfaces 450mm x 300mm x 7mm / 600mm x 300mm x 7mm thick including 10mm thick backing coat in CM 1:4 using type -I adhesive confirming to IS15477:2004 and pointed in white or coloured cement to match the shade of tiles including necessary cutting as per site requirement complete all as specified. |
| 48 | Supply & fixing for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 49 | M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 and including demolition of brick work or stone masonry built in cement mortar complete all as specified and directed. |
| 50 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified. |
| 51 | M&L for rendering 15mm thick in cement mortar 1:6 on internal wall surfaces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified. |
| 52 | M&L for rendering 15mm thick in cement mortar in 1:4 on external wall surfaces of brick work or concrete surfaces even and fair without using extra cement complete all as specified. |
| 53 | M&L for preparation of new plastered Internal wall surface and applying putty 1mm thickness over plastered surface to prepare the surface even and smooth including two coats of distempering with ist quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ltr, of approved manufacturer of required shade and colour complete as per manufacturer specification. |
| 54 | M&L for complete removal of existing treatment on old plastered wall surface and applying putty 1mm thickness over plastered surface to prepare the surface even and smooth including two coats of distempering with ist quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ltr, of approved manufacturer of required shade and colour complete as per manufacturer specification. |
| 55 | M&L for preparation of new plastered wall surface and finishing wall with two coats of Acrylic smooth exterior paint of required shade : (applied @ 1.67 ltr / sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm complete all as specified and as directed. |
| 56 | M&L for complete removal of existing treatment on old plastered wall surface and finishing wall with two coats of Acrylic smooth exterior paint of required shade : (applied @ 1.67 ltr / sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm complete all as specified and as directed. |
| 57 | M&L for preparation old previously treated surface of steel and iron work any description over 10 cm width or girth and applying one coat of synthetic enamel paint on old steel surfaces, complete all as specified and directed. |
| 58 | M&L for preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on old decorated wooden surfaces, complete all as specified and directed. |
| 59 | M&L for preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 60 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) complete all as specified. Please Enable Macros to View BoQ information |
