|
| 1 | Demolition of brick work built in CM including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removal of the rubbish off the premises complete all as specified and directed. |
| 2 | M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed. |
| 3 | M & L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified and as directed |
| 4 | Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 5 | M & L for rendering 5mm thick cement plaster in cm 1:3 on ceiling including finished fair and even complete all as specified and as directed. |
| 6 | M & L for rendering 15 mm thick cement plaster in cm 1:6 on fair faces brick or concrete surfaces of wall including finished fair and even all as specified and as directed. |
| 7 | M&L for Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete surfaces finished fair and even, mixed wth water proofing compound admixture (if directed) as per manufacturer's instruction, complete all as specified and directed.Note :- WPC will measuered and paid separatly under relevant item of schedule. |
| 8 | Supply only integral Liquid water proofing compound complete all as specified and directed. |
| 9 | M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed. |
| 10 | M&L for preparing old decorated plastered surfaces of walls by mechanical means using power-operated disc sanders (long-reach/giraffe type) equipped with integrated industrial vacuum dust extraction systems (HEPA filter compliant) to ensure dust-free execution. (Manual scraping shall only be permitted in corners and areas inaccessible to the machine), rectifying minor cracks and undulations using Acrylic Wall Putty and primer to achieve a smooth, even surface. and applying two coat of white wash on Walls complete all as specified and as directed.Note : Item includes provision of necessary scaffolding suitable for height upto 12 mtr, protection of existing flooring/fixtures, safety and disposal of debris, all complete as specified and as directed. |
| 11 | M&L for preparation of new plastered surfaces (walls and ceilings) to receive painting, carried out by mechanical means using power-operated disc sanders (long-reach/giraffe type) equipped with integrated industrial vacuum dust extraction systems (HEPA filter compliant). Manual finishing shall be restricted to internal corners and areas inaccessible to the machine, and apply Two coats of Nanotechnology based Acrylic Regular Distemper, water based over and including priming coat of nano primer over and including1 .00 mm thick Nanotechnology based Wall Putty followed by fine-sanding to achieve a smooth, even substrate , complete all as specified.Note : (i) The painting finishes shall be done by using Airless Spray Painting Technology to achieve a uniform, streak-free matte finish. (ii) Item includes provision of necessary scaffolding suitable for height upto 12 mtr, protection of existing flooring/fixtures, safety and disposal of debris, all complete as specified and as directed. |
| 12 | M&L for preparing old decorated plastered surfaces of ceiling by mechanical means using power-operated disc sanders (long-reach/giraffe type) equipped with integrated industrial vacuum dust extraction systems (HEPA filter compliant) to ensure dust-free execution (Manual scraping in restricted corners and areas inaccessible to machines); rectifying of minor cracks and surface undulations using Acrylic Wall Putty followed by fine-sanding to achieve a smooth, even substrate including one coat of Water-based Wall Primer over wall putty and applying one coat of Nanotechnology based Acrylic Regular Distemper, water based , complete all as specified and as directed.Note : (i) The painting finishes shall be done by using Airless Spray Painting Technology to achieve a uniform, streak-free matte finish. (ii) Item includes provision of necessary scaffolding suitable for height upto 12 mtr, protection of existing flooring/fixtures, safety and disposal of debris, all complete as specified and as directed. |
| 13 | M&L for complete removal of existing treatment of old decorated plastered wall by mechanical means using power-operated disc sanders (long-reach/giraffe type) equipped with integrated industrial vacuum dust extraction systems (HEPA filter compliant) to ensure dust-free execution (Manual scraping in restricted corners and areas inaccessible to machines); rectifying of minor cracks and surface undulations using Acrylic Wall Putty followed by fine-sanding to achieve a smooth, even substrate and applying two coat oftwo coat of Nanotechnology based Acrylic Regular Distemper, water based , over and including one coat of Nanotechnology based wall primer, complete all as specified and as directed.Note : (i) The painting finishes shall be done by using Airless Spray Painting Technology to achieve a uniform, streak-free matte finish. (ii) Item includes provision of necessary scaffolding suitable for height upto 12 mtr, protection of existing flooring/fixtures, safety and disposal of debris, all complete as specified and as directed. |
| 14 | M&L for complete removal of existing treatment of old decorated plastered wall by mechanical means using power-operated disc sanders (long-reach/giraffe type) equipped with integrated industrial vacuum dust extraction systems (HEPA filter compliant) to ensure dust-free execution (Manual scraping in restricted corners and areas inaccessible to machines); rectifying of minor cracks and surface undulations using Acrylic Wall Putty followed by fine-sanding to achieve a smooth, even substrate and applying Two coats of 100% Nanotechnology based Nano water base high-performance, premium acrylic exterior anti carbonation emulsion paint with unique chemical composition of finest quality (using AIR-LESS PAINT SPRAYER) having VOC less than 38.40 gm/litre (Company Depot Tinted) and durable, water repellent, UV resistant, fungus/ algae/ bacteria resistant, thermally insulating, elastomeric, including priming coat of exterior nano primer , complete all as specified and as directed.Note : (i) The painting finishes shall be done by using Airless Spray Painting Technology to achieve a uniform, streak-free matte finish. (ii) Item includes provision of necessary scaffolding suitable for height upto 12 mtr, protection of existing flooring/fixtures, safety and disposal of debris, all complete as specified and as directed. |
| 15 | M&L for preparation of new plastered surfaces (walls and ceilings) to receive painting, carried out by mechanical means using power-operated disc sanders (long-reach/giraffe type) equipped with integrated industrial vacuum dust extraction systems (HEPA filter compliant). Manual finishing shall be restricted to internal corners and areas inaccessible to the machine, and aapplying Two coats of 100% Nanotechnology based Nano water base high-performance, premium acrylic exterior anti carbonation emulsion paint with unique chemical composition of finest quality (using AIR-LESS PAINT SPRAYER) having VOC less than 38.40 gm/litre (Company Depot Tinted) and durable, water repellent, UV resistant, fungus/ algae/ bacteria resistant, thermally insulating, elastomeric, including priming coat of exterior nano primer new surfaces. on external surface as directed by Engineer-in-charge.Note : (i) The painting finishes shall be done by using Airless Spray Painting Technology to achieve a uniform, streak-free matte finish. (ii) Item includes provision of necessary scaffolding suitable for height upto 12 mtr, protection of existing flooring/fixtures, safety and disposal of debris, all complete as specified and as directed. |
| 16 | M & L for preparation of new surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 17 | M & L for preparation of new painted steel and iron surfaces of any description exc 10 cm width or girth and applying TWO coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 18 | M & L for preparation of old painted surface of concrete or bick or stone surfaces etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 19 | Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed. |
| 20 | M&L 75 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in receiving floor Finishes complete all as specified and directed. |
| 21 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 22 | M & L for screed or bedding layer 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified and as directed. |
| 23 | M & L for Rendering 10mm thick in cement mortar 1:4 finished even and fair on vertical surfaces on walls complete all as specified and as directed. |
| 24 | S&F Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 25 | M&L Glazed ceramic coloured tiles in vertical surface 300X450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all complete all as specified and directed. |
| 26 | S&F Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.38 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 27 | M&L Glazed ceramic coloured tiles in vertical surface area n.exc 1.00 sqm of each tile in walls set and jointed in neat cement slurry and pointed in white or colour cement to match all complete all as specified and directed. |
| 28 | M&L for VItrified Ceramic tiles 8-9 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 29 | M&L green Marble work 16 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana Adanga complete all as specified and as directed. |
| 30 | M&L for 75 mm thick cement concrete M10 (Nominal Mix) with 40mm graded crushed aggregate finished even and fair laid to a slope of 1 in 12, laid in alternate bays, each bay not exceeding 3 m length with joint filled with bituminous mastic filling comprising a mixture of 1 part of heated Industrial bitumen 85/25 grade and two parts of heated sand as in plinth protection complete all as specified and directed. |
| 31 | Taking down chowkat or frames exc 1.5 sqm but n exc 4.0 sqm each with shutter (without taking off shutters from the frame) complete all as specified and as directed. |
| 32 | Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 33 | S&F Powder coated aluminium (miimum thickness of powder coating 50 micron) work for doors, windows, ventilators frame and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engineer-in-Charge |
| 34 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-chargeher for openable/sliding shuttters) including all necessary fittings as directed |
| 35 | S&F Sheet glass 3 mm thick, ordinary quality & glazing with oil putty in square but n.exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 36 | S&F Sheet glass 3 mm thick, ordinary quality & glazing with oil putty in square but exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 37 | S&F Chimney bars (straight or camber); bearing bars; ton-gues or water bars for window frames; window guard bars, plain let in & fixed independently in wooden frames L or T section support for shelves etc., & similar articles conforming to Fe 290-0 Gde E-165 complete all as specified and as directed. |
| 38 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 39 | S&F Solid PVC door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, in opening as per specification & drawing complete all as specified and as directed. |
| 40 | S&F Factory made solid moulded PVC door shutter 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurathane painted on the front face & 2 mm thick plain colour PVC sheet on back face with particle face supply & fixing on frame, as per specification & drawing complete all as specified and as directed. |
| 41 | S&F stainless steel Butt hinges 100mm size, medium weight, complete all as specified and as directed. |
| 42 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 43 | S&F extruded Aluminium alloy handles 150mm size, cast type, anodised complete all as specified and as directed. |
| 44 | S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and as directed. |
| 45 | S&F in repair anodised extruded aluminium handle size 150 mm long fixed with screw complete all as specified and as directed. |
| 46 | S&F in repair anodised aluminium barrel tower bolt of size 200 mm long fixed with screws complete all as specified and as directed. |
| 47 | Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 48 | S&F anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm, complete all as specifed and as directed. |
| 49 | S&F for hangers 4 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means ceilings cleats made out od GI flat 40x3 mm size 60 mm long and expansion hold fastners 12.5 mm dia, complete all as specifed and as directed. |
| 50 | S&F 4 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work, complete all as specifed and as directed. |
| 51 | S & F PVC Sheet 16mm thick one side laminated, for cupboard/ shuttes density 600 Kg /Cum, Complete all as specified and as directed ,Make - Celluka Ply and equivalent Note : Colour and pattern will be decided by Engr in charge. |
| 52 | Dismanting of wrought iron or mild steel work af any description not otherwise provided for complete all as specified and as directed by Engineer-in-charge. |
| 53 | S&F Rolled mild steel in main and cross beams, (as in posts/purlins/rafter) where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates all as required and directed conforming to Fe 410-W (Gde E-250 quality A) complete all as specified and as directed. |
| 54 | Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including translucent sheet complete all as specified and as directed by Engineer-in-charge complete all as specified and as directed. |
| 55 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated of any profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to anyheight including all necessary scaffolding and safety measures complete all as specified and directed |
| 56 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified any height Mtr height including all necessary scaffolding and safety measures complete all as specified and directed |
| 57 | Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 58 | Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 59 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing and making good of groves for concealed GI tube, cutting not exc 10cm girth complete all as specified and as directed. |
| 60 | S&F 16 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 61 | S&F 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 62 | S & F in repairs vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 63 | S&F in repairs vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed |
| 64 | S & F in repairs vitreous china squatting pan, 'Orissa\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing , connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 65 | S&F in repairs PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified. |
| 66 | Supply & Fixing in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm without pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified complete all as specified |
| 67 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 68 | S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 69 | S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed. |
| 70 | S&F in repair chromiuim plated Swivel shower roses with shower arm, 125 mm size including fxing to steel pipe or union etc complete all as specified and as directed. |
| 71 | S&F in repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets. complete all as specified and as directed. |
| 72 | S&F glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and as directed. |
| 73 | S&F in repairs waste coupling of 40mm dia brass chromium plated for glaze ware sinks, basins, etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specfied and as directed |
| 74 | Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 250 liters and not exc 500 liters and writing date of cleaning with white paint on each tanks complete all as specified and as directed. |
| 75 | Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 500 liter and not exc 1000 liters and writing date of cleaning with white paint on each tanks complete all as specified and as directed. |
| 76 | S&F in repair grating doom 125mm dia with waste hole of PTMT minimum weight 40 Gms complete all as specified and as directed. |
| 77 | Taking down PVC rain water pipe any size or pattern including all fittings all as specified and directed. |
| 78 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/laid in floor complete all as specified and as directed. |
| 79 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 80 | S&F 110mm dia PVC (SWR) junction, single (single T) equal or unequal with door access all as specified and as directed |
| 81 | S&F in repair fancy type C.P bib taps cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule complete fixed in repair complete all as specified and as directed. |
| 82 | S&F Stop valve/ Angle valve cast copper alloy screwed down high pressure with capston headed handle chromium plated concealed type screwed both ends for iron pipe 15 mm bore or for unions complete all as specified and as directed. |
| 83 | S&F in repairs fancy type 15mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for iron pipe fixed in repair complete all as specified and as directed. |
| 84 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and as directed. |
| 85 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and as directed. |
| 86 | S&F in repair Pillar taps, fancy type 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 87 | S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed. |
| 88 | S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 89 | S&F in repair soap dish, any type fixed to plugs chromium plated brass screws complete all as specified and as directed. |
| 90 | M & L for TMT bars 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 91 | M & L for TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders complete all as specified and directed. |
| 92 | M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, fordoors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; complete all as specified and directed. |
| 93 | S & F in repairs flexable PVC waste pipe 32MM dia of length 900m m PTMT complete all as specified and as directed. |
| 94 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed. |
| 95 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative panelled decorative flush door shutter one side plain on other side of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and as directed. |
| 96 | S&F factory made single extruded WPC (Wood Polymer Composite) wire gauzed i.e. panel will be wire mesh in lieu WPC , the wire gauze shall be warped on additional square 8mm MS Solid tube and this tube shall be welded to MS frame complete all as specified and as directed. |
| 97 | S&F in repair C.P bib taps long body cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule complete fixed in repair complete all as specified and as directed. |
| 98 | S&F in repair S S curtain rod 20mm internal dia with fancy type brackets and side knobs as per sample complete all as specified and as directed by Engineer-in-Charge . |
| 99 | S&F stainless steel kitchen plate rack(24''x24''x10'') including necessary fixing/fitting & making good the existing surface complete all as specified and directed . |
| 100 | Supply and fixed in repairs floor mounted (single piece WC) bowl with cistern for coupled WC with and including UF soft close slim seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set complete of size 380x655x765 mm with S Trap- 250 mm, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 101 | S & F wall mixer cromium plated 3 way including telephonic shower arrangement with connecting legs, wall flanges & wall bracket for hand shower all as specified. |
| 102 | S&F in repairs two way bib cock 15 mm chromium plated 1 mm complete all as specified and directed. |
| 103 | S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated complete all specified |
| 104 | M&L for repair to crack portion with jacktting technuque, taking down existing plaster up to brick wall surface of min 200 mm wide, cleaning to loose particles on surface of brick work along the length of crack and filling the gap/crack area with PCC 1:1.5:3 type A0 using 12.5 mm aggregate up to brick surface and inserting the welded mesh of size 25 x 25x 2 mm dia along the crack on both side of the wall surface fixed with, drilling holes 10 mm dia on either side of the crack by means of drilling machine through out the full width of the wall @ 25 cm c/c and insert 8/10 mm dia rod in the drilled holes, welded with horizontal rod to with hold the welded mesh and applying grit plaster 1:1:2 using 4 mm and down aggregate finished even and smooth without using extra cement complete all as specified and directed. (Note: Reinforcement and welded mesh will be measured and paid separately ) |
| 105 | Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified. Please Enable Macros to View BoQ information |
| 106 | Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified. Please Enable Macros to View BoQ information |
