|
| 1 | Providing sweeping and cleaning services in Officer colony Campus including cleaning of road, side lanes of road, parking area, open spaces, grass cutting etc. as required for proper completion of work, for halfl working hour complete as per direction of E/I. NSI |
| 2 | Cleaning of main drain or width more than 300mm including disposal of waste refuses sludge out side the board's area including washing and cleaning by clean water completely as per direction of the E/I. including cost of all labour, T&P etc. required for completion of the work. (SI No.29.61) |
| 3 | Cleaning of main drain or width less than 300mm including disposal of waste refuses sludge out side the board's area including washing and cleaning by clean water completely as per direction of the E/I. including cost of all labour, T&P etc. required for completion of the work. (SI No.29.62) |
| 4 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved (SI No. 15.60) |
| 5 | Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour, T&P etc. required for proper completion of the work. (S.I. No.29.59) |
| 6 | Cleaning of inspection chamber including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour, T&P etc. required for proper completion of the work. (S.I. No.29.60) |
| 7 | Attending to petty maintenance service like plumbing service, welder service, mansion service and carpenter service required (Job attending by one no. Plumber/welder/mason/carpenter with one no helper per hour or part of an hour.) (SI No. 29.80) |
| 8 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete(SI No. 13.88) |
| 9 | White washing two or more coats old work including supply of all material, labour and T&P etc. required for proper completion of the work.(SI No. 13.87.1) |
| 10 | COLOUR washing two or more coats new work including supply of all material, labour and T&P etc. required for proper completion of the work.(SI No. 13.39.1) |
| 11 | Finishing walls with water proofing cement paint of required shade :Old work (one or more coats @ 2.20 kg/10 sqm) complete.(SI No.13.109.2 |
| 12 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm). ( SI No. 13.46.1) |
| 13 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre ( SI No. 13.41.1) |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :old work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre ( SI No. 13.81.1) |
| 15 | Wall painting Two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.( SI No. 13.83.2) |
| 16 | Painting or Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work.( SI No. 13.115) |
| 17 | Repairs to plaster With cement mortar 1:4 (1 cement : 4 fine sand) of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.( SI No. 14.1.1) |
| 18 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below (CSI No. 15.12.1) |
| 19 | Providing and fixing 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.(SI No. 9.20.2) |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (S.I. No. 13.62.1) |
| 21 | Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P. (SI No. 29.06) |
| 22 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (SI No. 10.2 ) |
| 23 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece . (SI No. 10.5.2) |
| 24 | Providing & fixing glass panes 4.0 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :(SI No. 10.30.1) |
| 25 | 2.5 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (SI No. 29.35) |
| 26 | 4.0 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (SI No. 29.36) |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.external workfor 15 mm dia(SI No. 18.9.1) |
| 28 | Same as above but for 20 mm dia(SI No. 18.9.2 ) |
| 29 | Same as above but for 25 mm dia(SI No. 18.9.3) |
| 30 | Same as above but for 32 mm dia(SI No. 18.9.4) |
| 31 | Same as above but for 40 mm dia(SI No. 18.9.5) |
| 32 | Same as above but for 50 mm dia(SI No. 18.9.6) |
| 33 | Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includese EXTERNAL GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (SI No. 18.12.1) |
| 34 | Same as above but for 20 mm dia.SI No. 18.12.2 |
| 35 | Same as above but for 25 mm dia.SI No. 18.12.3 |
| 36 | Same as above but for 32 mm dia.SI No. 18.12.4 |
| 37 | Same as above but for 40 mm dia.SI No. 18.12.5 |
| 38 | Same as above but for 50 mm dia.SI No. 18.12.6 |
| 39 | Providing and fixing PVC BALL FLOAT VALVE 20mm dia. WITH BRASS & UNION COMPLETE ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. SI No. 18.18.2 |
| 40 | Providing and fixing 20MM gun metal gate valve with C.I. wheel of approved quality (screwed end) : (SI No. 18.17.1A) |
| 41 | Providing and fixing 25MM gun metal gate valve with C.I. wheel of approved quality (screwed end) : (SI No. 18.17.1) |
| 42 | Providing and fixing 32MM gun metal gate valve with C.I. wheel of approved quality (screwed end) : (SI No. 18.17.2) |
| 43 | Providing and fixing PVC CONNECTION PIPE, 300x15 MM with 2 brass uints ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.((SI No. 18.21.1) |
| 44 | Providing and fixing PVC CONNECTION PIPE, 450x15 MM with 2 brass uints ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.((SI No. 18.21.2) |
| 45 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.((SI No.18.48 ) |
| 46 | Providing and fixing 15 mm dia C.P. brass bib cock of approved quality conforming to IS:8931 : (SI No. 18.49.1) |
| 47 | Providing and fixing 15 mm dia C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.: (SI No. 18.51.1) |
| 48 | Providing and fixing 15 mm dia C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931(SI No. 18.53.1) |
| 49 | Providing and fixing15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms PTMT PILLAR cock of approved quality and colour.(SI No. 18.56.2) |
| 50 | Providing and fixing15 mm nominal bore, 90 mm long foam flow, weighing not less than 93 gms PTMT BIB cock of approved quality and colour.(SI No. 18.54.4) |
| 51 | Providing and fixing of 150 mm dia PVC pipe of 6 Kg/sqcm with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 29.91) |
| 52 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests SI NO 17.1.1 |
| 53 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (SI NO 17.3.1) |
| 54 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required.White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (CSI No. 17.7A) |
| 55 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (CSI No.17.18.1) |
| 56 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid . White solid plastic seat with lid(CSI No.17.20.1) |
| 57 | Providing and fixing Semi rigid pipe 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(SI No. 17.28.1.1) |
| 58 | Providing and fixing flexible pipe 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(SI No. 17.28.1.1) |
| 59 | Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 29.108) |
| 60 | Providing and laying 110mm dia SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. (SI No. 29.109C) |
| 61 | Providing and fixing 110 mm diaSWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etc required for proper completion of the work.(SI No. 29.110C) |
| 62 | Providing and fixing 110 mm diaSWR, PVC ( Finolex or equivalent ) TRAP including cost of all materials, labour and T&P etc required for proper completion of the work.(SI No. 29.111C) |
| 63 | Providing and fixing 110 mm dia SWR, PVC ( Finolex or equivalent ) Socket including cost of all materials, labour and T&P etc required for proper completion of the work.(SI No. 29.112C) |
| 64 | Providing and fixing 110 mm dia SWR, PVC ( Finolex or equivalent ) plain Tee including cost of all materials, labour and T&P etc required for proper completion of the work. (SI No. 29.114C) |
| 65 | Providing and fixing110 mm SWR, PVC ( Finolex or equivalent ) Door Tee including cost of all materials, labour and T&P etc required for proper completion of the work. (SI No. 29.115C) |
| 66 | Providing and fixing 110 mm diaSWR, PVC ( Finolex or equivalent ) Door “Y” including cost of all materials, labour and T&P etc required for proper completion of the work.(SI No. 29.116C) |
| 67 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. (SI No. 11.40) |
| 68 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.CSI NO 8.31 |
| 69 | Providing and fixing water closet squatting pan size 580x440 mm (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(SI No. 17.13.2 ) |
| 70 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of surplus earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.SI No:- 2.8.1 |
| 71 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone SI No:- 4.1.10 |
| 72 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)SI No:- 4.1.2 |
| 73 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.SI No:- 5.22A.6 |
| 74 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) SI No 6.1.2 |
| 75 | Supply and filling brick bat in soak pit including all labour,material and T&P etc complete. (for 01 soak pit) SI No 29.05 Please Enable Macros to View BoQ information |
