|
| 1 | Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed and directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall and eves board fixed with self tapping screws as specified and directed. |
| 4 | Dismantling boarding, any description, fixed in any position with nails as specified and directed. |
| 5 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, plywood etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 6 | S&F for Anodised aluminium snap grid frame work for false ceiling size 605x605mm with hangers 6mm dia GI adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 7 | M&L for 4mm thick Non asbestos fiber cement building boards for Ceiling flat or sloping inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed. |
| 8 | Excavating in trenchs, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10sq m on plan and getting out in hard/ dense soil complete all as specified and directed. |
| 9 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed. |
| 10 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for coloumns, hooking ends and binding with (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 11 | M&L for mild steel TMT bars 5mm dia and over and including 10mm dia in stirrups, spacers and binders, bent to shspe required incl cranking, bending spirally for hooping for coloumns, hooking ends andbionding with (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 12 | M&L for M-25 (20mm graded aggregates) reinforced cement concrete (design mix) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 13 | M & L for reinforced cement concrete (design mix) M-25 (20mm graded aggregates) as Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 14 | M&L for M-25 (20mm graded aggregates) reinforced cement concrete (design mix) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 15 | M & L for Reinforced cement concrete B1 (1:2:4) 20mm aggregate Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and inshelves and the like complete all as specified and as directed. |
| 16 | Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams, drain sides or similar works vertical or to batter for fair finish finished surface in flat complete all as specified and as directed. |
| 17 | All as per item No. 16, but for columns complete all as specified and as directed. |
| 18 | Use & waste formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports over hang etc and similar works for rough finished surfaces of concrete in flat complete all as specified and as directed. |
| 19 | M&L in cement concrete 1:2:4 B-0, 25mm for Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed. |
| 20 | M&L for Pre-cast cement concrete block masonry Type C1 (1:3:6) 20mm Aggregate with solid blocks, exc. 10 cm in width and setting in CM 1:4 complete all as specified and as directed. |
| 21 | M&L Brickwork with Modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in and setting in CM 1:6 etc complete all as specifed and directed. |
| 22 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 23 | M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces with using WPC on top layer finishing the surfaces even and smooth without using extra cement complete all as specified and directed.(WPC will be measured and paid separately) |
| 24 | Supply only liquid water proofing compound complete all as specified and directed. |
| 25 | M & L rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L for Preparing new plaster surface apply two coat of distemper oil emulsion incl a coat of alkali resitant priming paint over a coat of 2 mm thick wall care putty complete all as specifed and directed. |
| 27 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specifed and directed. |
| 28 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed. |
| 29 | S&F for mild steel rolled sections as in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. ( Fe 410-W (Gde E-250) quality A) complete all as specified and directed. |
| 30 | Erection fixing only for mild steel rolled sections as in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. ( Fe 410-W (Gde E-250) quality A) complete all as specified and directed. |
| 31 | M&L for Preparation of old steel surfaces of any description over 10cm width or girth not other wise described applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 32 | Demolition of cement in ground floor and paving exc 15 cm thickness (below or above ground level complete all as specified and directed. |
| 33 | M&L for cement concrete work in 150 mm thick Cement concrete work in pavement/hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed. |
| 34 | M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm stone aggregate) as in sub base of PCC floor finished even and rough complete all as specified and directed. |
| 35 | M&L for 25mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in floor finishing even and rough to receive floor finishes complete all as specified and directed |
| 36 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortar 1:6 complete all as specifed and directed. |
| 37 | M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 38 | M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement incl filling the joint complete all as specified and directed. |
| 39 | M&L for colour non skid ceramic tiles of size 300 x 300 x7 to 8mm including 15mm thick screed bed in cement mortar 1:6 jointed in neat cement slurry including pointing in coloured cement/colour cement to match complete all as specifed and directed. |
| 40 | Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 41 | M&L for pressed steel frames for doors size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed |
| 42 | S&F mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 43 | M&L for 30mm thick flush shutters, solid core constructions with block board core and commercial type ply wood face (BWP type) including lipping/frame to match all round complete. |
| 44 | S & F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass gauze etc divided into square with plain, without sash bar edges of framing plain, chamfered or rounded fitted with cut mitred beads for securing glass etc, the size of members of shutters shall be as specified in SSR part I, section 8, clause 8.24 ( a). |
| 45 | M&L for Preparation of new wooden surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed. |
| 46 | S&F for butt hinges medium weight cold rolled mild steel 125 mm complete all as specified. |
| 47 | S&F for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 48 | S&F Solid PVC door frame(chowkat) of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube etc complete all as spd and directed. |
| 49 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour of PVC sheet for top rail lock rail and bottom rail, on either side & gap insert for top rail bottom rail panelling of plain colour PVC sheets to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppying and fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 50 | S&F for 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 51 | S&F Extruded Aluminium alloy handles 150 mm long, fabricated type anodised complete all as specified. |
| 52 | S&F for 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 53 | S&F for butt hinges of stainless steel 100mm size complete all as specifed and directed. |
| 54 | Taking down chowkats or frames not exc 1.5 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 55 | S&F for powder coated aluminum section for making frame and shutters of doors, windows, partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading complete all as specified and as directed (Glazing, rubber beading,hinges etc shall be measured and paid separately) |
| 56 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 57 | S&F 5.5m thick obscured or frosted glass sheet in Aluminium frame exc 0.5 sqm in each pane complete all as specified and directed. |
| 58 | Anodised aluminium grill (anodised transparent or dyed to requiredshade according to IS: 1868 with minimum anodic coating of gradeAC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainlesssteel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixingapproved anodised aluminium standard section around theopening, all complete as per requirement and direction of Engineer-in- charge. |
| 59 | S&F Mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding complete all as specified & as directed. |
| 60 | S&F in repair 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 61 | S&F for Over counter wash basin, color white, including uninstalling of existing wash basin Cat. No. : 10105, Make: Hindware and equivalent all as specified and directed. |
| 62 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm th screed bed in cement mortar 1:6 jointed complete all as specified. |
| 63 | M&L Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified. |
| 64 | S&F in repair for Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specifed and directed. |
| 65 | S&F Pillar taps 15mm bore dia Fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. |
| 66 | S&F in repair for 600mmx450mm belvelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 67 | S&F Wall Mixer for mixing hot and cold water 15mm bore brass CP, screwed down for iron pipe and fixed, Make: Jaguar Cat. No.: FUS-CHR-29267 and equivalant complete all as specified. |
| 68 | S&F in repair Hindware glass shelf Cat. No: F880010 and equivalent complete all as specified. |
| 69 | S&F in repair Hindware western style WC all in one, color white with soft closet seat cover Cat. No. : 20123 (S-22/P-18) and equivalent all as specified and directed. |
| 70 | S&F in repair Hindware Health Faucet Starc HF WT 1.2 M SS Flexible Tube Cat. No.: F160194CP and equivalent complete all as specified and directed. |
| 71 | S&F in repair for CP towel rail of 20mm dia with hook 600mm long complete all as specifed and directed. |
| 72 | S&F in repair for Ruhe PVC waste pipe 30mm dia Cat No. 17-020 complete all as specifed and directed. |
| 73 | S&F in repair for PVC connection 15mm dia and 600mm long complete all as specifed and directed. |
| 74 | S&F in repair for 15mm bore chromium plated brass,fancy type angle cock screwed for iron pipe or union and fixed complete all as specifed and directed. |
| 75 | S&Fin repair vitreous china squatting pan 'Orissa' pattern size 580x440mm with white integral footrest (excluding flushing cistern and flush pipe including making good )complete all as specifed and directed. |
| 76 | S&F in repair for 10 Litres capacity PVC valveless syphonic action type flush cistern low level white with inlet ball valve float and handle including brackets complete all as specified and directed. |
| 77 | S&F in repair for 15 mm bib tap CP fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrules and complete all as specifed and directed. |
| 78 | S&F for 75 mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor including taking down complete all as specifed and directed. |
| 79 | S&F for 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor including taking down complete all as specifed and directed. |
| 80 | Dismantling water tanks of 1000 Litre capacity and removing to store complete all as specified and directed. |
| 81 | S&F rotational moulded polyethylene water storage tank, three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I of capacity 1000 ltrs including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball and nipple screwed for iron pipe and fixed complete all as specified and directed. |
| 82 | Taking up or down 15 mm bore steel tubuing and connection incl cleaning for refixing or removal to store complete all as specified and directed. |
| 83 | S&F for 15mm GI tubing 'Medium grade' with all fiting and fixed complete to wall and celing or laid in floor of fllowing sizes complete all as specified. |
| 84 | Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. |
| 85 | S&F for 20mm GI tubing 'Medium grade' with all fiting and fixed complete to wall and celing or laid in floor of fllowing sizes complete all as specified. |
| 86 | S&F for PVC (SWR) bend of any radius - 110 mm dia.complete all as specified and directed. |
| 87 | S&F for PVC (SWR) 'P’ trap of 110 mm dia. complete all as specified and directed. |
| 88 | S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed. |
| 89 | S&F in Repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)complete all as specified and directed. |
| 90 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 91 | M&L for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed. |
| 92 | S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 93 | M&L for Preparation of old painted surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coats of cement base paint complete all as specified and as directed. |
| 94 | M&L for complete removal of old existing treatment of old plastered wall surfaces and applying two coats of oil emulsion distemper incl a coat of alkali resistant priming paint over a coat of 2mm thick wall care putty complete all as specified and directed. |
| 95 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm with any type of soil complete all as specified and directed. |
| 96 | Removing excavated soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 97 | M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 98 | M & L PCC to backfill of pressed steel chawkhats type-C-0 1:3:6 (12.50mm graded aggregate) complete all a specified. |
| 99 | M&L forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ in 200 mm thick slab complete all as specified and directed. |
| 100 | M & L for forming Construction joint 30 mm deep x 10 mm wide filled with sealing compound, Grade ‘A’, complete all as specified and directed. |
| 101 | M&L Finishing surface of concrete roads, pavements, but by brooming complete all as specified and as directed. |
| 102 | Note : Tenderers may note that amount of credit Rs 327732.05 will be deducted from the total amount arrived at the time of Acceptance of contract Please Enable Macros to View BoQ information |
