Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness (below or above the ground level) complete all as specified and directed |
| 2 | M&L 100mm thick Cement concrete type C2, 1:3:6 (40mm graded aggregate) as in sub base of floor finished even and rough complete all as specified and directed. |
| 3 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debries/rubbish complete all as specified and directed. |
| 5 | M&L 18-20 mm thick machine cut Kota stone slab as in flooring over and including 20 mm thick screed bed in cement mortar (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and complete all as specified and as directed. |
| 6 | M&L 18-20 mm thick Pre polished machine cut Kota stone slab in single piece as in risers, skirting, dado etc including moulding/rounding tthe edges of the slab, over and including 15mm thick backing layer in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed. |
| 7 | M&L Vitrified Ceramic tiles light shade 8-9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.72 sqm but n.exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 8 | M&L Vitrified Ceramic tiles light shade 8-9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.72 sqm but n.exc 1.00 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 9 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 10 | M&L glazed ceramic coloured / digital printed/Elevation tiles of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 11 | M&L heavy duty 300 x 300mm & 12mm thick anti skid pavement tile (color & Shade as approved) set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. Notes:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 12 | M&L TMT bar 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 13 | M&L TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 14 | Demoliation Brickwork masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed |
| 15 | M&L brick works with fly ash bricks straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed |
| 16 | M&L brick works with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed |
| 17 | Demoliation of reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 18 | M&L Reinforced cement concrete (Nominal mix) type B-1 , 1:2:4 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 19 | M&L Reinforced cement concrete (Nominal mix) type B-1 , 1:2:4 (20mm graded aggregate) as in chajjas complete all as specified and as directed. |
| 20 | M&L Formwork to chajjas, troughs and similar items including edges flat, roughed finished surfaces, complete all as specified and as directed. |
| 21 | M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat, roughed finished surfaces, complete all as specified and as directed. |
| 22 | Taking down Chowkhats or frames exc 1.5 sqm and not 4.00 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 23 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)complete all as specified and as directed. |
| 24 | Taking down and Refixing of shutter of any description but exc 1 sqm and n. exc. 2 sqm each in same opeining etc complete all as specified and directed. |
| 25 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed |
| 26 | S&F150mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified. |
| 27 | S&F 100mm butt hinges, medium weight cold rolled, MS steel complete, all as specified and as directed. |
| 28 | S&F 150 mm aluminum handle cast type anodized, complete all as specified and directed. |
| 29 | S&F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedr complete all as specified and as directed. |
| 30 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 31 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed. |
| 32 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. including removing debries off the site complete all as specified and as directed. |
| 33 | M&L rendering 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 5mm) mixed with and including liquid water proofing compound in top layer as per manufacturer's instructions, finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 34 | M&L rendering 15mm thick plastering in cement mortar (1:6) on on fair faces of brick work and finished the plastered surface fair and even without using extra cement.complete all as specified and as directed. |
| 35 | M&L Rendering 5 mm thick on concrete surfaces as in ceiling in cement mortar 1:3 for finished even and fair including taking down plaster complete all as specified and as directed. |
| 36 | Supply only Liqid water proofing compound complete all as specified and as directed. |
| 37 | M&L preparation of newly plastered surfaces of walls by applying one coat of wall care white putty and sand papering surfaces to achieve smooth surfaces and applying two coats, white or any tint acrylic based distemper emulsion, over a coat of alkaline resistant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified Note :- Colour / Texture shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 38 | M&L complete removal of existing finishes from wall surfaces and applying two coats of oil bound distemper over a coat of primer after applying One coats of wall care putty including necessary preperation of surfacescomplete all as specified and directed. |
| 39 | M&L preparation of New treated surface of wall by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying three coats of white wash on decorated surfaces of wall including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 40 | M&L preparation of old treated surface of wall by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coat of white wash on old decorated surfaces of wall including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 41 | M&L preparation of newly plastered surfaces on wall / ceiling / chajjas and applying two or more coats of 10-0% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surfaces as per the manufacturer instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application with flow speed of minimum 1 Ltr per minute having pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed. |
| 42 | M&L complete removal of existing treatment of old decorated treatment on wall / ceiling / chajjas by scrapping with true care wall sander : L-01/H-01 ( having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 80 grit having dia 7\\"/9\\" to make the surface free from dust, loose paints etc. or equivalent makes viz Xpress sanding machine having sanction vacuum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces as per the manufacturer instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application with flow speed of minimum1 ltr per minute having pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed. |
| 43 | M&L preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery, electrical fittings, wiring etc. of drops and splashes complete all as specified and as directed. |
| 44 | M&L preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coats of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery, electrical fittings, wiring etc. of drops and splashes complete all as specified and as directed. |
| 45 | Taking down old existing tarfelt/concrete of any type/description and course from roof surface including adjoining parapets and removing the debries from the site including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and derected. |
| 46 | M&L rendering 10 mm screed bed in Cement Mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 47 | M&L providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating in 4 coats of application as under:- (a) applying primer coat with Primer @ 0.3 kg /sqm (b) over priming coat applying applying single component acrylic polymer modified as manufacturer instructions with fibre reinforcement a width of approx 1m @ 0.75kg/sqm on the flat or vertical surfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Applying second coat of roof guard @0.75Kg/sqm (d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly. Note : Water Proofing treatment shall be carried out by authorised applicator approved by the manufacturer. |
| 48 | S&F mild steel conforming to Fe.290.Gde-E-165 Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed. |
| 49 | M&L preparation of newly Steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide primer complete all as specified and as directed. |
| 50 | M&L PCC 1:2:4 Type B-1 (20mm graded aggregate) provinding as in kerbs,filling hollow space in chowkhat,copings, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 51 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed. |
| 52 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 53 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length length complete all as specified and as directed.Note: (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc ,complete all as specified and as directed. |
| 54 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: stainless steel butt hinges and necessary fitings shall be paid separately |
| 55 | S&F Factory made partly glaged ie. upper panel will be wire mesh fitted externaly in the clear space & lower panel will be plain colour PVC sheet 5mm thick PVC door shutter 30mm thick (style ) consisting of frame made out of M.S tubes for top & bottom , rails , MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for sides and plain colour PVC sheets for botop rail , lock rail rail & bottom rail on either side & as gap insert for top rail & bottom rail , paneling of plain colour PVC sheet PVC sheet beading , and jointed together with solvent cement, complete all as specified and as directed.Note: stainless steel butt hinges and necessary fitings shall be paid separately |
| 56 | supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire meshpanels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.Note:(i) Glass or wiremesh shall be paid separately (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 57 | Demolition of wall and ceiling board (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet , complete all as specified and directed. |
| 58 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing as specified in SSR Part I, Section 8 complete all as directed. |
| 59 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing as specified in SSR Part I, Section 8 complete all as directed. |
| 60 | S&F 4mm thick 'E' classic designer board false ceiling with powder coated GI snap grid frame work of grid size 600 x 600 mm complete all as specified and directed including all necessary drilling and necessary arrangement to fix items as under :-(a) 27x27x0.55 mm thick GI angle powder coated duly plugged @ 600mm centre to centre alongwith perimeter of wall. (b) 25x25x0.55 mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders (n.exe 1.2 mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/wooden truss/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick AC \\"E\\" Classic designer board of approved texture and finished complete. Note :- The complete ceiling work shall be done as per manufactures instruction and as directed. |
| 61 | M&L Gypsum Board 12mm thick for seamless false ceiling to flat surface fixed with screw over and including GI frame work comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermidiate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermidiate jointing compound & 48mm wide fibre tape to provide seam less finish etc,complete all as specified and as . Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 62 | S&F Gypsum board 12mm thick decorative cornices upto 100mm wide along the false ceiling fixed on vertical surfaces with cadmium plated screw ,complete all as specified. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 63 | S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, wood free EPS as per specifications and drawing as specified in SSR Part I, Section 8 complete all as directed. |
| 64 | S&F factory made solid PVC frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5 mm thick PVC sheet of density 600Kg/cbm having pattam width of 50mm and thickness of 10mm. All three frame length reinforced with 19mm x 19mm MS square tube of 19 gauge. mitre cut at two corners and joined with two nos of 150mm long brackets of 15X15mm MS square tube or joint by fusion hit welding. The door frame shall be fixed to the wall thickness using 8Xthroughout the frame and metre cut at two corners and jointed with 2 nos of 150mm long brackets of 15mm x 15mm MS square tubes.The door frame shall be fixed to the wall using 8/100mm long MS screws through the frame by using PVC fasteners. A minimum 4 nos of screws to be provided for each vertical member and minimum 2 nos of screws to be provided to the horizontal member etc.complete all as specified and directed. |
| 65 | Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed. |
| 66 | Taking up or down 20 mm bore steel tubing and connections, complete all as specified and directed. |
| 67 | S&F 15mm dia GI pipe medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed. |
| 68 | S&F 20 mm dia GI pipe medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed. |
| 69 | S&F in repair, 15 mm bore Bib taps, chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 70 | S&F in repair, 15 mm bore Stop valves, chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 71 | S&F in repair,15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 72 | S&F in repair, Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed. |
| 73 | S&F in repair, 10 Litres, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, flush pipe including brackets including PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 74 | S&F in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, jet spray(SS304) with 1mtrs flexible PVC tube and plate complete all as specified and as directed. |
| 75 | S&F in repair, rimless single piece, white, vitreous china wash down water closet pan, floor mounted type with PP soft close slim seat cover, hinges, dual flush cistern fittings, fixing acessories and acessories set (min. size 645x355x675mm) with \\"P\\" or \\"S\\" trap, complete all as specified and as directed. |
| 76 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 77 | S&F 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 78 | S&F in repair, 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms.) complete all as specified and as directed. |
| 79 | Dismantling water tanks and removing from site of any capacity or description, complete all as specified and as directed. |
| 80 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 81 | S&F in repair, Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flange complete all as specified and directed. |
| 82 | S&F in repair, Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 83 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 84 | M&L PVC (SWR) floor trap of 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 85 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 86 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed. |
| 87 | S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 88 | S&F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed. |
| 89 | S&F 100mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 90 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches. |
| 91 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors/trenches complete all as specified and directed. |
| 92 | S&F 75 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed. |
| 93 | S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 94 | Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings including ridges, hips, valleys and flashings complete all as specified and directed. |
| 95 | S&F Pre-painted galvalume aluminum zinc coating GI Based corrugated/semi corrugated steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 96 | S&F Pre-painted galvalume aluminum zinc coating GI Based plain steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/ridges/Valleys / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 97 | Dismantling structural steel work in cluding doors, gates but excluding framed truss etc.complete all as specified and directed. |
| 98 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe.410 W.Gde-E-250 Quality A complete all as specified and directed. |
| 99 | M&L for 15-18 mm thick Granite work ( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screeding in cement mortar 1:4 including full rounding the exposed surfaces and provision of holes for LPG gas pipe etc complete all as specified and as directed. Notes: (a)Granite colour shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 100 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.. |
| 101 | INTERNAL ELECTRIFICATIONTaking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed. |
| 102 | M&L concealed point wiring complete for one socket outlet 15/16 Amps point on independent board with 4 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall including provision of 4 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sunken terminal box made out of MS sheet steel not less than 1.22 mm thickof required size duly painted with aluminum inside and anticorrosive paint outside, (clear depth of the box not less than 60mm) concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, etc duly earthed complete all as specified and as directed Note:-(i) Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles. (ii) Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost |
| 103 | M&L concealed point wiring One light point controlled by one way switch 5/6 amps complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size (minimum thickness of sheet not less than 0.8mm) suitable for modular switch/ fittings fixed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. complete all as specified and as directed. complete all as specified and as directed Note:- (i) Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles. (ii) Where concealing of conduit is not feasible ie on surface of RCC roof/ceiling etc, conduit shall be fixed on surface with necessary saddles at no extra cost |
| 104 | All as per item No 103 here-in-above but for One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. |
| 105 | All as per item No 103 here-in-above but for One socket out let 5/6 amps point on the independent board |
| 106 | All as per item No 103 here-in-above but for One socket out let 5/6 amps point on the same board |
| 107 | All as per item No 103 here-in-above but for One bell point controlled by one way switch 5/6 amps |
| 108 | All as per item No 103 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket c let 15/16 amps point on the independent board complete all as specified and directed |
| 109 | S&F Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt. ISI marked complete all as specified and as directed |
| 110 | S&F Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed |
| 111 | S&F Modular switch, single pole, one way, 16 Amp. 1 Module, 230 volt, ISI marked complete all as specified and all directed |
| 112 | S&F Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts. (ISI marked) complete all as specified Eac and as directed. |
| 113 | S&F Modular bell push, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed |
| 114 | S&F stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep,ISI marked complete all as specified and directed. |
| 115 | S&F Call bell Ding dong, 230 Volt single phase complete all as specified and directed. |
| 116 | S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed. |
| 117 | S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed. |
| 118 | S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and directed. |
| 119 | S&F IP 20, class I, LED light 1X20 W (or nearest next higher wattage) (4feet). 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified. |
| 120 | S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90. operating range 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified. |
| 121 | S&F Decorative wall light fixture made up of polycarbonate suitable for 15 Watt LED retrofit of type B-22 base, IP66 grade, with and including 15 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified. |
| 122 | S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts (or nearest next higher wattage) with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and Gl pipe bracket made out of Gi pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including taking out old unserviceable fitting all as directed |
| 123 | S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, 900 rpm. Heavy duty with and including Cutting of hole in brick wall for fixing of exhaust fan, with nuts, bolts washer as required including plastering and make good the disturbed surface with the existing complete all as specified and directed. |
| 124 | Taking down carefully Ceiling fan from its original position and refixing/hanging after repair work of bldg complete all as specified and directed. |
| 125 | M&L Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc., all as specified and as directed. |
| 126 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) pre-wired and connected with three core copper conductor from ceiling rose to connector block complete all as specified and directed |
| 127 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB's), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB S/Isolators with and including taking down old one complete all as specified and directed. |
| 128 | S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar,neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including taking down old ounserviceable one complete all as specified and as directed. |
| 129 | S&F MCB, Triple pole & neutral 63 amps, 240 volts, 'C' curve, 10KA complete all as specified and as directed. |
| 130 | S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, 'C' curve, 10KA all complete all as specified and as directed |
| 131 | S&F MCB, Single pole, 5 to 32 amps, 240 volts, 'C' curve, 10 KA all complete all as specified and as directed. |
| 132 | S&F epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 Volts, C Series current carrying capacity 10 kA, including necessary connection complete all as specified and directed. |
| 133 | M&L concealed sub-main wiring alongwith earth wire of size of 2 x 6.00sq. mm + 1 x 6.00 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of suitable size with all fittings and accessories ISI marked including taking out old unserviceable submain wiring and making good to walls, floors etc as per existing specifications complete all as specified and as directed. NOTE : (i) Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length.(ii) Cost of cutting chases and making good the distrubed surfaces of wall is deemed to be inclusive in the unit rate quoted |
| 134 | Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to GI wire 4mm dia. by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth strip protected by 20 mm bore (Light grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion complete all as specified and as directed. |
| 135 | EXTERNAL ELECTRIFICATIONTaking out old unserviceable cable of any size carefully from trenches ofter disconnecting electric connection, Gi pipe protection, with and including separating serviceable bricks & set aside and removing un-serviceable bricks from site complete all as specified and as directed. Note: The Excavation and earth work shall be mesured and paid separately under relevant item of Schedule. |
| 136 | Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded,galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 50 sqmm 3.5 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. ( NOTE: Earthwork & Excavation, Gl pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A'). |
| 137 | Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up/laying under ground electric cable complete all as specified and as directed. |
| 138 | Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cm as in soft/loose in depth complete all as specified and as directed. |
| 139 | Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed |
| 140 | M&L providing sand cushioning for protection of UG cable (8 cm deep before laying & 15 cm above the top edge of cable after laying) in trenches with dry (coarse) sand approved quality including filling, spreading and punning down to desired thickness complete all as specified & as directed. (NOTE : Punned thickness of 18 cm only shall be considered for payment purpose) |
| 141 | Supply and laying brickwork with locally (Sub Class B Bricks) available best quality bricks in trenches for protection of UG Cable with width equal to length of bricks, laid dry & flat complete all as specified & as directed. |
| 142 | M&L horizontal boring across the existing road without disturbing the road surface for inserting Gl pipe complete all as specified and as directed. Note:- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) Gl pipe will be measured and paid separately under relevant item of Sch 'A'. |
| 143 | M&L 50 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed |
| 144 | S&F moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 200 Amps, breaking capacity 36 KA including taking down existing unserviceable one complete all as specified and as directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
