|
| 1 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil and clening away all grass vegetation, saplings, shrubs, brushwood , undergrowth , roots, and removing rubbish upto a distance of 50 metre outside the periphery of the area under clearance complete, all as specified. |
| 2 | Steel rolling shutters having thickness of laths 1.25 mm, as specified including top hood cover, anchoring rod,hasp and staple and one shop coat of ptimer, erected in position as indicated,complete push pull or manual type, complete all as specified and directed. |
| 3 | Mild steel works in hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) in-cluding all necessary drilling, bolting or riveting, etc., confirming to Fe-290-Gde E-165, complete all as specified. |
| 4 | 50 mm thick PCC type C-1 (1:3:6), using 20 mm graded stone aggregates even and smooth without using extra cement as in plinth protection including cutting joints at 3 m interval and each corner and joints filling with bitumen complete all as specified. |
| 5 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws comlete all as specified. |
| 6 | Rendering 5 mm thick on RCC or similar surfaces, finished even and smooth on ceilings in cement mortar (1:3), complete all as specified. |
| 7 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) complete all as specified. |
| 8 | Rendering 15 mm thick on of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound as per manufacturer recommended ratio,complete all as specified. NOTE- WPC shall be measured and paid separetely. |
| 9 | Supply only water proofing compound, ISI marked, complete all as specified. |
| 10 | Two coat of white wash on old wall surfaces, including preparation of surfaces, complete all as specified. |
| 11 | Two coat of white wash on old ceiling surfaces, including preparation of surfaces, complete all as specified. |
| 12 | Three coats of white wash on new plastered ceiling surfaces, including prepration of surfaces complete, all as specified. |
| 13 | One coat of interior acrylic distemper on old wall surfaces, including prepration of surfaces complete, all as specified. |
| 14 | Two coats of interior acrylic distemper on old wall surfaces including cornices etc, including prepration of surfaces complete, all as specified. |
| 15 | Two coats of interior acrylic distemper on new wall surfaces, including prepration of surfaces complete, all as specified. |
| 16 | Two coats of cement base paint on new plastered wall surfaces, including preparation of surfaces, complete all as specified. |
| 17 | Complete removal of existing treatment of any description using mechanized sander having suction vacuum bag, including prepration of wall surfaces of any description and applying two coats of cement base paint, complete all as specified. |
| 18 | Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in two layer & smoothening the surfaces as specified. (preparatory to paint as directed). (b) One coats of interior acrylic distemper over and including a coat of primer |
| 19 | Complete removal of existing treatment with mechenical scraper of any description, applying Two coats of exterior acrylic emulson over and including a coat of water based exterior primer including RCC over head tank of any height and prepration of wall surfaces of any description in disruptive/camouflaging pattern of four / three shades complete all specified |
| 20 | Prepration of new plasterd wall surfaces of any description & applying Two coats of exterior acrylic emulsion over and including RCC over head tank of any height and a coat of water based exterior primer in disruptive/camouflaging pattern of four / three shades complete all specified |
| 21 | Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in 3mm thick & smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of exterior acrylic emulson over and including a coat of water based exterior primer. |
| 22 | Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in 3mm thick & smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer. |
| 23 | Preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified. |
| 24 | Peparation of new painted steel & iron surfaces of any description not other wise described over 10cm width or girth and applying Two coat of synthetic enamel paint complete all as specified. |
| 25 | Peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified. |
| 26 | Writing letters or figures by specialist / professional painter (Block, Roman, Italic or indian) with thick black synthetic enamel paint not exc. 30cm height on white base complete all as specified. |
| 27 | Removing of vegetation of unapproachable roof from all joints corner and edges of roof slab and parapet including removing roots and filling joints with CM 1:3 complete all as specified and directed.Notes: Contractor will prepare sketch of area and get it signed by GE before and after removal of vegetation. |
| 28 | Removing up rooting vegetation growth building roof top / sides of walls exc 30 cm girth incl and stacking or serviceable material and disposal of unserviceable material to distance n exc 50 cm and clearing site and making food of the distrubed surfaces in brick work CM 1:4 and plaster in 1:4 surface area n exc 0.5 sqm complete all as specified and as directed by Engg-in-Charge (Note : For removal of vegetation if reqd at site rain water bends to be removed |
| 29 | Repairing of RCC projection chhajjas, roof, facia etc by necessary preparation. Scraping cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC with cement concrete Type A-0 (1:1.5:3) and reinforcement with chicken mesh of weight not more than n.exc 3 kg/Sq.m (if reqd) with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches of area n.exc 5 Sq.m and thickness of RCC member n.exc 70 mm incl necessary formwork at any height/location complete all as specified.NOTE: The rate quoted by the contractor shall included for chicken mesh, scaffolding and necessary formwork upto triple storey bldg. |
| 30 | Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 31 | Taking down and refixing of steel rolling shutter of area n exc 6 sqm by complete greasing, easening & straightening of distorted MS plate guide channel and locking plate. small article such as bracket plates,nails, T&P are deemed to be included in the rates, complete all as specified and directed. |
| 32 | Dismantling plain or corrugated steel sheeting, any gauge , thickness, including nanital or similar pattern roof coverings. |
| 33 | Dismantling rolling shutter completely of any description, complete all as specified and directed. |
| 34 | Dismantling wrought iron or mild steel work of any description, complete all as specified. |
| 35 | Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
