|
| 1 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 2 | Brick work with old size sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified. |
| 3 | Ditto all as per item No.02 above, but except bricks, all as specified and directed. |
| 4 | Brick work with sub class B brick straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified and directed. |
| 5 | Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc all as specified and directed. |
| 6 | Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 7 | Rendering 15mm thick on fair faces of brick work or cement concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed. |
| 8 | Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement, complete all as specified and as directed. |
| 9 | Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 10 | Preparation of newly plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed. |
| 11 | Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. |
| 12 | Preparation of new treated surfaces and apply two coat of oil bound distemper to walls over one coat of chalk whitening primer complete all as speicfied and directed. |
| 13 | Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coat of oil bound distemper complete all as specified and as directed. |
| 14 | Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coat of cement base paint white or tined on wall complete all as specified and as directed. |
| 15 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 16 | PCC 1: 2 : 4 type B-1 ( using 20mm graded crushed stone agg.) 40mm thick as in floor finishing surfaces of conc topping even and smooth without using extra cement as in base of water storage tanks,including necessary form work for rough finished surfaces etc. |
| 17 | 50mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in bays n.exc 2.00 Sqm complete including finishing the surface of concrete topping even & fair. The joints shall be filled with mastic filling, complete all as specified and as directed. |
| 18 | 75mm thick PCC (1:3:6) type C-1 (using 40mm graded stone aggregate) as in PCC path complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 20 | 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub floor under tiles, complete all as specified and as directed. |
| 21 | Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and directed. |
| 22 | ditto all as per item No 21 but in skirting over and including 10mm thick rendering in CM 1:4 |
| 23 | Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick back coat layer plaster in cement mortar 1:4,complete all as specified and as directed. |
| 24 | Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors, set and jointed in neat cement slurry and pointed in white/coloured cement to match with shade of tiles including 15mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed. |
| 25 | Ditto all as per Item No 24 here-in-before, but in skirting/dado over and including 10mm thick rendering in CM 1:4. |
| 26 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons,walls etc, complete all as specified and directed. |
| 27 | 20-25 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed.Note:-(Size of Kota Stone slab shall be 52 cm x 52 cm). |
| 28 | Ditto all as per Item No 27 here-in-before, but in skirting/dado over and including 10mm thick rendering in CM 1:4. |
| 29 | 20 mm thick makrana white marble as in border/cooking platform etc, bedded and jointed over 20mm thick screed in cement mortar 1:6 including pointing in white cement 1:2 using marble dust including cutting and polishing complete all as specified and as directed. |
| 30 | Dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed. |
| 31 | Dismantling timber scantlings (framed work) 40 Sqcm and over in section, in any position complete all as specified and as directed. |
| 32 | Structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B complete all as specified. |
| 33 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 34 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 35 | Dismantling of wall and ceiling boards ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness,including ceiling framework, complete all as specified. |
| 36 | GI snap grid frame work (Grid size 600x600mm) with powder coated GI angle of size 25x25x3mm fixed along wall perimeter, main runner 'T' of size 25x40x3mm , secondary runner 'T' of size 25x30x3mm suspended with 3mm GI wire @ 1200mm c/c of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels,including 4mm thick prelaminated designer ceiling board to be inserted in GI snap grid complete all as specified and as directed. |
| 37 | Vitreous china squatting pan \\"Orissa Pattern\\" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'S' trap fixed in repairs complete all as specified and approved. |
| 38 | Vitreous china wash down water closet pan pedestal pattern including seat cover white excluding flushing cistern and flush pipe fixed in repairs complete all as specified and directed and approved |
| 39 | PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe etc. fixed in repairs, complete all as specified and as directed. |
| 40 | Vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe fixed in repairs, complete all as specified. |
| 41 | Vitreous china wash basin, white, flat back, size 550x400mm with full padestal with & including CP basin mixer including waste pipe porcelain stopper a pair of CI brackets fixed in repair complete all as specified and approved |
| 42 | 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs, complete all as specified and as directed. |
| 43 | PVC connection 15 mm size, of length 450 mm, with PTMT nuts fixed in repairs, complete all as specified and as directed. |
| 44 | Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed. |
| 45 | Ditto all as per item No. 44 above but 20 mm bore. |
| 46 | Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified. |
| 47 | Ditto all as per item No 46 above but 20mm bore. |
| 48 | 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 49 | 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 50 | Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings, complete all as directed. |
| 51 | Ditto all as per item No. 50 above but 20 mm bore. |
| 52 | Angle/ Stop valves (Concealed type), cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15mm bore pipe fixed in repairs, complete all as specified and directed. |
| 53 | Bib taps15mm, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm fixed in repairs, complete all as specified and as directed. |
| 54 | Pillar taps 15mm bore cast copper alloy CP, fancy type with capstan head with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut fixed in repairs, complete as specified and as directed. |
| 55 | Chromium plated cast copper alloy Health faucet with one mtr long stainless steel flexible tube and wall hook fixed in repairs, complete as specified and as directed. |
| 56 | Plastic water closet seat cover white closed pattern with flat bottom and cover including chromium plated hinges device fixed in repairs, complete all as specified and as directed. |
| 57 | Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) fixed in repairs, complete all as specified and directed. |
| 58 | Plate rack made of stainless steel 0.8mm thick overall size 786mm x 610mm x 254mm fixed in repairs complete all as specified and directed. |
| 59 | Brass chromium plated fancy type wall mixture for mixing hot and cold water supply screwed down incl connecting leg & wall flange for iron pipe 15mm bore fixed in repairs all as specified and directed |
| 60 | Stainless Steel sinks with drainage board made of stainless steel (1mm thick) kitchen or laboratory with plugs,washers and wastes pipes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets fixed as in repairs and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and approved. |
| 61 | 20mm bore gun metal glove or gate valve with iron wheel head screwed bith end for iron pipe and fixed in repairs, complete all as specified and as directed. |
| 62 | Rotational moulded polyethylene water storage tanks of 1000 litres capacity,three layered and white in colour(cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed. |
| 63 | Rotational moulded polyethylene water storage tank 500 litres Capacity, three layered and white in colour(cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed. |
| 64 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed. |
| 65 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and as directed. |
| 66 | Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each, complete all as specified and directed |
| 67 | Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed. |
| 68 | Pressed steel frames of sizes 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia threshold bar and filling hollow of frame,all as specified and directed. |
| 69 | Pressed steel frames of sizes 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia threshold bar and filling hollow of frame ,all as specified and directed. |
| 70 | Plain Cement Concrete 1:2:4 type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame complete all as specified. |
| 71 | PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate for hold fast blocks, including necessary form work, complete all as specified. |
| 72 | 35mm thick, 2nd class soft wood glazed & skelton factory made shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plan, chamfered or rounded fitted with cuts and metred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section-8, Clause 8.20 (a) complete all as specified and as directed. |
| 73 | 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified. |
| 74 | Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing. |
| 75 | Factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified and directed. |
| 76 | Aluminium powder coated sliding window, chowkat of size 63mm x 40 mm x 1.3 mm thick with aluminium powder coated two track frame of size 63 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thickscrewed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel including necessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mm complete all as specified and as directed. |
| 77 | Aluminium powder coated sliding window, chowkat of size 92mm x 40 mm x 1.3 mm thick with aluminium powder coated three track frame of size 92 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thick screwed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel including necessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mm complete all as specified and as directed. |
| 78 | Aluminium powder coated door shutter with powder coated frame of size 65mm x 50 mm x 1.6 mm thick fixed with hinges and shutter with top rail,bottom rail, middle rail and style of size 85mmx 44mm x 1.6 mm thick with 200mm size aluminium handle on both side of shutter aliminium tower bolt 150 mm long 2 Nos per leaf including 5.5 mm thick selected quality , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed hydraulic door closer for each leaf , mortic lock 4 levers with 2 Nos key , 3Nos butt hinges of stainless steel for each shutter including provn of 8 mm dia nut and bilt on both side of top rail and bottom rail complete all as specified and as directed. |
| 79 | Powder coated aluminium door/ partition sections with standard aluminium sections for frame work, for glazed shutters, partitions, ventilators with one or more rebates including joiining cleats, aluminium beadings etc for fixing etc. complete all as specified. |
| 80 | Powder coating Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/m (glass & wire mess shall be measured and paid separetely) including necessary joining cleats, glazing rubber packing, anodised aluminium clips, snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 N.) and 100 mm long aluminium tower bolt (02Nos) per shutters complete all as specified |
| 81 | Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed. |
| 82 | 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed. |
| 83 | 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed. |
| 84 | Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed. |
| 85 | Door closer of aluminium (Die cast body), hydraulically regulated, designation No 3, universal type, suitable for door shutters of size 851mm to 1000mm of width , ISI marked fixed in repairs, complete all as specified and as directed. |
| 86 | Aluminium mortice lock (4 levers) 100 mm long vertical type fixed in repairs, complete all as specified and as directed. |
| 87 | 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, fixed in repairs complete all as specified and as directed. |
| 88 | 25 mm dia stainless curtain road complete with stainless bracket and side caps fixed in position by drilling holes in wall and fixed the bracket with rawl plug and SS screw fixed in repairs, complete all as specified and as directed. |
| 89 | Taking down eaves gutters and PVC(SWR) pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed. |
| 90 | 110 mm dia PVC (SWR) Type-B pipes single socketed in any length with rubber ring joint laid in trenches or in floor all as specified and directed. |
| 91 | 110 mm dia PVC (SWR) Type-B pipes single socketed in any length with rubber ring joint fixed to wall with PVC/MS holder clamp all as specified and directed |
| 92 | 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joint laid intrenches or in floor all as specified and directed |
| 93 | 75mm bore PVC SWR Type-B pipes single socket in any length with rubber joint fixed to wall with PVC/MS holder clamp etc complete all as specified and as directed |
| 94 | PVC SWR reducer 110mm to 75 mm complete all as specified and as directed, |
| 95 | PVC SWR vent cowl 75 mm complete all as specified and as directed. |
| 96 | PVC (SWR) bend 110 mm dia any radius all as specified and directed |
| 97 | PVC (SWR) junction single (single T) equal or unequal provided with access door 110 mm dia all as specified and directed |
| 98 | PVC (SWR) bend 75 mm dia any radius all as specified and directed |
| 99 | PVC (SWR) 75 mm dia floor trap plain with grating including jointing with solvent cement fixed in repairs, all as specified and directed |
| 100 | PVC (SWR) junction single (single T) equal or unequal 75 mm dia all as specified and directed |
| 101 | Steel windows/ventilator (Box type) factory made glass/glazed shutter, (glass panes window shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 8mm square bar grills complete all as specified & as shown on drg No. CEUZ/TD/1302/2009 Sh No 1/1 to 1/3 . |
| 102 | -Ditto- all as per item No 101 above but without glazing bars and without grill/guard bar. |
| 103 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames/Aluminium frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 104 | 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed. |
| 105 | 3 mm thick sheet glass figured (frosted), ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed. |
| 106 | 5.5 mm thick tinted sheet glass, selected quality and glazing with aluminium beads and rubber packing in square not exceeding 0.5 square metre in each pane, complete all as specified and as directed. |
| 107 | 4 mm thick tinted sheet glass, selected quality and glazing with aluminium beads and rubber packing in square not exceeding 0.5 square metre in each pane, complete all as specified and as directed. |
| 108 | Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 109 | Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples fixed in repairs, complete all as specified and directed. |
| 110 | Preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer, complete all as specified and as directed. |
| 111 | Preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of Ist quality over a coat of pink primer,complete, all as specified. |
| 112 | Preparation of old steel surfaces of any description exc 10 cm width or girth, and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 113 | Preparation of old wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth, and appying one coat of synthetic enamel paint complete all as specified and as directed. |
| 114 | Taking down and refixing in the same position of aluminium door shutters of any size and description and making functional by way of repair/ replacement of floor spring, hinges, lock, rubber packing etc as required complete all as specified and as directed. |
| 115 | Sunken Floor treatment :- Providing and laying of water proofing treatment to sunken portion by applying cement slurry mixed with acralic based polymer modified cementitious composite compound of make as approved including demolition and filling of sunken floor by PCC 1:5:10 (Using aggregate).(a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours.(b) Second layer of slurry of cement Q 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/ Sqm his layer allowed to air cure for 4 Hours. Note :- 1. Concrete for sunken slabs shall be mixed with WP compounds as manufacturdrs instructions before carrying out water proofing treatment the sunken slab slab shall be tested with water for 48 hrs for any leakage/dampeness is seen in ceiling below, then treatment is again carried out to RCC slab and it is again tested ( Water proof compound rate is superatly.2. 50mm thick PCC at the bottom of slab and slope shall be 1:20 toward the corner of outer wall and GI pipe of 50mm dia (Med grade) be inserted at corner projecting outside 20 cm . 3. 15 mm plaster mised with WP Compound shall be provided while concrete is green. 4. Only floor area shall be measured for payment purpose. |
| 116 | Repair to balcony Facia and soffit of chajjas etc by taking down old rendering and applying 15mm thick cement plaster to match the existing thickness in CM 1:4 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm in width or girth including preparation of surface and applying two coats of cement base paint as required over one coat of primer including necessary formwork/scaffolding work upto height 7 mtr above ground level of bldg complete all as specified and as directed. |
| 117 | PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof kerb, padding , finished surface even and fair, complete all as specified and directed. |
| 118 | Chequered cement concrete tiles 20x20x25 cm/30cmx30cmx25mm thick laid & jointed with grey cement and pointed in neat cement slurry in floors 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes all as specified and directed. |
| 119 | Pre laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame and necessary item like hasp and staple , in repairs as cupboard/Alimirah shelve and shutter, 18/19 mm thick. |
| 120 | Intermat auto closing concealed hinge, fixed in repairs as approved complete all as specified and as directed. |
| 121 | Supply & fixing of 6\\" premium quality crome finish Handle,complete as directed . |
| 122 | Telescopic channel set for drawer multi-tech high capacity 500 mm long as approved complete all as specified and directed . |
| 123 | 19-20mm wide and 0.80mm thick decorative type PVC beading complete all as specified and directed. |
| 124 | Glass shelf 600mm long consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing with brackets fixed in repairs all as specified and approved |
| 125 | Glass corner shelf assembly consisting of 5.5 mm thick sheet with chromium plated bracket guard and railing 45 cm long complete all as specified and directed. |
| 126 | Stainless steel gratings 100/125mm dia fixed with cement motar fixed in repairs, complete all as specified and as directed. |
| 127 | Waste pipe for WHB/Urinal for 32/40mm dia fixed in repair all as specified and as directed . Please Enable Macros to View BoQ information |
