|
| 1 | Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc.complete all as specified and directed. |
| 2 | M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement |
| 3 | M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement |
| 4 | M&L rendering 5 mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement all as specified |
| 5 | M&L for preparing old decorated surfaces of wall and applying one coat of cement base paint on old surfaces of wall complete all as specified and as directed |
| 6 | M&L for two coats of exterior weather proof anti dust paint including two coat of wall care putty incl preparation of new surface of wall/ complete removal of old decorated surfaces of wall complete all as specified and as directed. |
| 7 | M& L for two coat of oil bound distemper including 2.00 mm thick wall care wall putty incl preparation of new surface/complete removal of old surfaces of wall complete all as specified and as directed. |
| 8 | M& L for one coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed. |
| 9 | M&L oil bound distemper on ceilling including preparation of new plastered surface and complete all as specified |
| 10 | M&L preparing Old plastered or unplastered surfaces of ceiling and applying oil bound distemper on old decorated surface of ceiling complete all as specfied and directed. |
| 11 | M&L for preparing of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints all as specified & directed by the Engr-in-Charge. |
| 12 | M&L for preparing of old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified & directed by the Engr-in-Charge. |
| 13 | S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 14 | S & F mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guisides) and hanging also fastening and fixing complete all as specified and directed. |
| 15 | Dismantling boarding any sidescription fixed in any position with nails all as specified and directed. |
| 16 | S & F as in repairs stainless steel wire clothes 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed . |
| 17 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed. |
| 18 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each complete all as specified and directed. |
| 19 | Hacking out old broken glass of (any thickness,size, quality or description) from old wooden frame, or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed. |
| 20 | S&F 200 mm long stainless steel barrel tower bolts fancy type, and fixed as specified and as directed. |
| 21 | S&F 100 mm long butt hinges, stainless steel grade 304, medium weight with stainless steel hinge pin complete all as specified and directed. |
| 22 | S&F, 150 mm stainless steel handles Grade 304 fancy type complete all as specified and as directed. |
| 23 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 24 | M & L for Glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 7-8 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles including taking down old tiles complete all as specified and as directed. |
| 25 | M & L for vitrified double charge tiles light shed 10 mm thick ( square or rectangular) polished, area of each tiles exc 0.42 sqm but not exc 0.72 Sqm each in floors etc. set and jointed with cement and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:4 complete. |
| 26 | M & L for vitrified double charge tiles light shed 10 mm thick (square or rectangular) polished, area of each tiles exc 0.42 sqm not exc 0.72 sqm, in skirting etc. set and jointed with cement and pointed in white or coloured cement ot match over and incl 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 27 | S&F in repair one piece composite, rimless, vitreous china wash down water closet pan including cistern white colour including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed. |
| 28 | S&F in Vitreous China table top wash basin of suitable size including suitable long body brass CP pillar tap, SS bottle trap, HDPE waste pipe including fixing on counter with SS waste coupling complete all as specified and as directed. |
| 29 | S & F in repair for 0.8 mm thick stainless steel in graceful glory range, anti scratch, satin finish of popular range kitchen sink over all size 990x459mm, double bowl size 400x340xx200 mm incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed. |
| 30 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed. |
| 31 | S&F in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device |
| 32 | S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed. |
| 33 | S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 34 | S& F in repairs Brass CP wall mixer 15mm dia 3/4 hole including provision of shower and for mixing hot & cold water, screwed down, three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and directed. |
| 35 | S&F in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plug, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed. |
| 36 | S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note: S&F rates of frame also include rate for anodised aluminium hard ware such as aluminium angles/cleat, handles, tower bolts, locking arrangement, indicated, pvc roller, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames. |
| 37 | S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specifiedd. Make : Make of aluminium section as approved by GE and Make of aluminium fittings as approved by GE. |
| 38 | S&F 4.8 mm thick sheet glass, tinted quality and glazing in square or recangular shape area exc 0.5 sqm in each pane fixed with rubber gasket, aluminium beading & aluminium clips with frame made of aluminium section including making good of wall surfaces to match with existing surfaces complete all as specified and directed. |
| 39 | S&F of 12 mm thick toughned glass door fixed with SS hinges, partitions automatic doors and similar work including cutting to shape, drilling holes including necessary SS hinge or SS cleat complete all as specified and directed. |
| 40 | S&F in repair kitchen sink coupling of any size and any pattern including waste pipe complete all as specified and directed. |
| 41 | S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed. |
| 42 | S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed. |
| 43 | S&F in repair vitreous china wash basin white, flat, back, size 550 x 400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified and directed. |
| 44 | S&F 15mm bore pillar tap, fancy type, cast copper allloy with capstan head chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed. |
| 45 | S&F in repair only 32mm/40mm dia waste coupling/fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.complete all as specified and directed. |
| 46 | Supply and fix 32mm/40mm dia waste pipe for wash hand basin/urinals complte all as specified and directed |
| 47 | S&F in repair PVC connection 15mm bore length not less than 600 mm long with both ends PTMT nuts complete all as specified and directed. |
| 48 | Demolition of cement concrete (un reinforced) in ground floor for pavings n.exc 15cm thickness (below are above ground level) complete all as specified and directed. |
| 49 | M&L 75 mm thick PCC 1:3:6 type C2 using (40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed. |
| 50 | Demolition of stone slab and tiles of any description or thickness in floor, aprons etc. complete all as specified and directed. |
| 51 | M&L for machine cut mirror polish kota stone slab flooring20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing .complete all as specified and directed. |
| 52 | M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including 10mm thick rendering in CM 1:4 including rubbing and polishing .complete all as specified and directed. |
| 53 | M&L for 20mm thick granite stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 54 | Demolition of brick work or stone masonry built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed. |
| 55 | M&L brick work with sub class B bricks (except bricks) burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 56 | M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 57 | Providing and fixing factory made UPVC white colour sliding window three track of area exceeding 2.00 Sqm each made of extruded profiles with wall thickness 2.3 mm (+/-0.2 mm). Window profile with hollow section with multi chamber. Frame (88mm X 52mm), sliding sash (42mm X 67mm). Sliding mesh Sash (42mm X 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm) , Glazing bead (24.5 mm x 16 mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, (1.2 +/- 0.2) mm thick galvanised steel Frame (30 mm X 18mm) 2 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mmX10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch Lock of Zinc alloyed(white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor exculdes cost of glass and includes all other connected acessories. Net Opening will be measured for payment purpose. |
| 58 | Providing and fixing factory made uPVC white colour sliding window three track of area not exceeding 2.00 Sqm each made of extruded profiles with wall thickness 2.3 mm (+/-0.2 mm). Window profile with hollow section with multi chamber. Frame (88mm X 52mm), sliding sash (42mm X 67mm). Sliding mesh Sash (42mm X 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm) , Glazing bead (24.5 mm x 16 mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, (1.2 +/- 0.2) mm thick galvanised steel Frame (30 mm X 18mm) 2 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mmX10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch Lock of Zinc alloyed(white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor exculdes cost of glass and includes all other connected acessories. Net Opening will be measured for payment purpose. |
| 59 | S&F factory made UPVC white colour fixed window area not exc 1 sqm made of extruded profiles with wall thickness of 2.3mm(+_2mm).Window profile with hollow section with multi chamber.(Frame 60X58mm).T profile (One vertical length in between two shutters)(60mmX74mm). Glazing bead(35mmX20mm) will be mitered cut and fusion welded at all corners,including drilling of holes for fixing hardware and drainage of water ,etc. making arrangement for fixing of hardware,EPDM gasket. 1.2+_0.2 mm thick galvanized steel frame(28mm X 21.5mm),T profile(27mm X 17mm) to be inserted in required profile,frame will be fixed to wall with 8mmX 100m long fasteners 5 mm thick glazing with selected quality glass complete. |
| 60 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 61 | S&F 200 mm long Stainless Steel glossy finish handles with SS screw, complete all as specified and directed. |
| 62 | S& F factory made single extruded WPC (wood polymer composite) solid door frames/chowkhat of size 40x 70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade),calcium carbonate and natural fibres (wood powder/rice husk) and non toxic additives(max toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum screw withdrawl strength of 2200 N(Face) and 1100 N(Edge) min compressive strength of 58 N/mm2 modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per dir of engineer-in charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately) |
| 63 | S&F factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60(suspension grade) calcium carbonate and natural fibres(wood powder/rice husk) and non toxic additives(max toxicity index of 12 for 100 gms)having min density of 650 kg/cum and screw withdrawl strength of 1800 N(Face) and 900 N(Edge) min compressive strength of 50N/mm2 modulus of elsticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per dir of Eng-in charge |
| 64 | S&F for factory made 18 mm thick WPC solid board of density 600 Kg/cum as in cupboard shelves, partitions, sides of cupboard & drawers with collapsible handle & with wardrobe/ finch lock, including powder coated aluminium cleat of size 25X25X3mm(colour of powder coated to match colour / shade of laminate) and as in fixing to sides of cupboard, soffits & base of cupboard with SS fastener, also including PVC lipping on all exposed edges of same texture & shade to match the laminate complete all as specified as directed. Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. |
| 65 | S & F 125 mm aluminium hasp and staple including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 66 | S&f for Slip on soft closing hinges for cupboard 125mm for cupboards complete all as specified and directed. |
| 67 | M & L for factory made 35 mm thick flush door shutters, solid core construction, with block board core and 5 mm thick plywood face panels on both side, commercial type on both sides covered face veneered decorative type etc complete fixed with including teak wood leaping all as specified and as directed. |
| 68 | S&F designed looking mirror size 600X450 mm with PVC beading of selected quality 6mm thick glass, mounted on fixed to wall with CP plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 69 | S & F Male Brass Threaded Adaptor (MTA/ MBTA/Female Brass Threaded adaptor (FTA/ FBTA) 15 mm dia complete all as specified. |
| 70 | Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed by Engr-in-charge. |
| 71 | Taking up or down steel tubing of 20mm dia and connections, including cleaning for re fixing or removal to store. |
| 72 | Disconnecting existing of water tank and removing to store exc 500 ltr and n. exc 1000 ltr etc |
| 73 | S & F of rotational moulded polythene water storage tank Triple Layer white colour cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified and directed Incl dismantling of existing tank. |
| 74 | S & F rotational moulded polyethylene water storage tank Triple Layer white colour (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples, complete all as specified and directed Incl dismantling of existing tank. |
| 75 | S & F in repair fancy type stainless steel grade 304 Towel rack size 600mm X 300mm including a pair of brass bracket complete all as specified and directed. |
| 76 | S&F for fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified and directed. |
| 77 | S&F in repair fancy type curtain rod 25mm dia SS wall thickness 1 mm bracket, finials, stops,rollers etc complete all as specified and directed |
| 78 | Taking down carefully aluminum, light, fan, socket or power point complete including unserviceable fittings such as switches ceiling roses, pendants, regulators, sockets etc at site and making good the disturbed surfaces of walls, floors filling up of holes, plastering white washing distempering etc matching to the existing etc. |
| 79 | M&L for point wiring for one light/fan, bell/ buzzer point controlled by one switch with cable 1.5 Sqmm size PVC insulated (unsheathed) 1100 volts grade single core stranded (multistrand) copper conductor FRLS cable and drawing in and including non metallic rigid PVC concealed conduit medium grade inclusive of conduit fittings such as Bends Teess reducers etc and galvanized iron sheet steel terminal boxes/modular flush boxes of size 16 gauge thickness, light switches sockets with 3mm thick bakelite laminated sheet brass screws and cup washers including one continuous run of 1.50 Sqmm nominal area PVC insulated unsheathed 1100 Volts grade single core FRLS cable with solid copper conductor green in colour with wire and connecting to earth dolly complete. |
| 80 | All as per Item Ser no 79 above but for One light / Fan point controlled by one way switch complete all as specified and directed. |
| 81 | All as per Item Ser no 79 above but for One Bell /Buzzer point controlled by one way switch complete all as specified and directed. |
| 82 | All as per Item Ser no 79 above but for One 3/5 pin 5 Amps socket outlet on independent board complete all as specified and directed. |
| 83 | All as per Item Ser no 79 above but for One 3/5 pin 5 Amps socket outlet on same board complete all as specified and directed. |
| 84 | All as per Item Ser no 79 above but for one light point controlled by two way switches complete all as specified and directed. |
| 85 | All as per item Ser No.79 here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 16 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed. |
| 86 | Supply and fixing in replacement switch modular flush type polycarbonate single pole one way 6 Amps complete all as specified and directed. |
| 87 | Supply and fixing in replacement socket out let sefty shutter 5 pin 6 Amps flush type all as specified and directed. |
| 88 | Supply and fix in replacement bell push flush type 5 Amps complete all as specified and directed. |
| 89 | Supply and fixing in replacement modular switch flush type one way 16 Amps SP complete all as specified. |
| 90 | Supply and fixing in replacement socket outlet modular polycarbonate 2 in 1 , 3 pin 6 / 16 Amps flush type complete all as specified and directed. |
| 91 | S& F in replacement swicth modular flush type 6 Amps single pole two way all as specified and directed. |
| 92 | S&F in replacement switch modular flush button single pole one way 16 Amp complete. |
| 93 | S&F socket in replacement out let 3 pin 6/16 Amp Multipurpose, Modular flush type 240 volt complete. |
| 94 | M & L for replacement of Step fan regulator modular type for ceiling fan of any sweep complete all as specified and directed by Engr-in-Charge. |
| 95 | S&F socket out let 3 pin 5 amp multipurpose modular flash type. |
| 96 | S&F switch 6 Amp modular flush type 240 volt one way complete. |
| 97 | S&F in replacement ceiling rose 3 terminals PVC / Polycarbonate insulated body 65mmx 50mm size complete all as spcified and directed. |
| 98 | Supply and fixing in replacement bell ding-dong musical AC 230 Volts single pole complete all as specified and directed. |
| 99 | S&F in replacement Stepped type electronics fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed. |
| 100 | Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp/ offwhite suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete |
| 101 | Supply and fix Modular White cover plates of acrylic sheet glossy finish with frame 8 Module complete all as specified and directed. |
| 102 | Supply and fix Modular White cover plates of acrylic sheet glossy finish with frame 6 Module complete all as specified and directed. |
| 103 | Supply and fix Modular White cover plates of acrylic sheet glossy finish with frame 4 Module complete all as specified and directed. |
| 104 | Supply and fix Modular White cover plates of acrylic sheet glossy finish with frame 3 Module complete all as specified and directed. |
| 105 | Supply and fix Modular White cover plates of acrylic sheet glossy finish with frame 2 Module complete all as specified and directed. |
| 106 | Supply and fixing LED lights fitting 1x 20W, 220V, AC 4 feet decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified by Engr-In-Charge. |
| 107 | Suppply and fixing submain wiring with using two single core 6.0 SQmm copper multy stranded conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.0 Sqmm copper multistandred conductor PVC insulated and unsheathed (FRLS) Earth wire using ISI MArked IS 694 1100 volts grade PVC insulated flexible stranded copper conductor wire drawn through with and including medium grade concealed PV C conduit ISI marked not less than 25 mm dia including conduit fitting and accessories complete including cutting cheses in existing wall of any descirption buiolt in ccement mortor and making good the disturbed surfaces in cement mortor (1:4) and finishing the surfaces to match with existing surfaces and finish termonatioin with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partition including clamping arrangement as required complete all as sepcified and directed .(Note:- Two Run of 6.0 Sqmm cable and one run of 6.0 sqmm earth wire in and including conduit of suuitable size shall be measured as one unit). |
| 108 | All as per item Ser No.101 here in before but with using copper conductor of 2.5 Sqmm and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed. |
| 109 | All as per item Ser No.101 here in before but with using copper conductor of 4 Sqmm and using 4 Sqmm copper conductor as earth continuty cable compete all as specified and directed. |
| 110 | S&F PVC rectangular gang box multi purpose 5/15 Amps including making connections complete all as specified. |
| 111 | Supply and replace Rigid PVC casing & capping 20/25 mm wide |
| 112 | S&F PVC rectangular gang box multi purpose 5 Amps including making connections complete all as specified. |
| 113 | S&F for MCB SP 6-32 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed. |
| 114 | S&F for MCB SP&N 10 to 63 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed. |
| 115 | S&F MCB distribution board double door sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 4 Ways complete all as specified and directed. |
| 116 | S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 8 Ways complete all as specified and directed. |
| 117 | Supply and fixing, Life savior plug 16 A (Plug top) , of power, built in test and reset button complete all as specified and directed |
| 118 | Taking down ceiling fans 48”/56” sweep, cleaning of dust properly cleaning, greasing & over hualing of bearings including refixing and connecting up all as directed . |
| 119 | S&F in replacement of old burnt fan with BLDC motor BEE five star rated ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 complete all aspecified and as directed. |
| 120 | Supply and fix in repairs 2.50 Mfd capacitior complete all as specified and as directed. |
| 121 | Supply and fix in repairs 3.15 Mfd capacitior complete all as specified and as directed. |
| 122 | Supply and fix in repairs 4.00 Mfd capacitior complete all as specified and as directed. |
| 123 | Supply and fix in repairs ball bearing suitable for exsiting ceiling fans on site complete all as specified and as directed. |
| 124 | Supply and fix in repair ‘U’ clamps complete with nut, bolts & split pins Heavy duty suitable for existing ceiling fan complete all as specified and as directed. |
| 125 | Supply and fix as in repair M.S. rod for ceiling fans 3 ft long with ‘U’ clamp at one end other end with out nut bolts washers or screwed thread with check nuts & pin complete all as specified and as directed. |
| 126 | Material and labour for rewinding of burnt fan motor with super enameled copper wire of suitable size 1200/1400mm sweep ceiling fan of any make, type, model including transporation (inclusive of material & labour) complete all as specified and as directed |
| 127 | M &L Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified |
| 128 | Taking down exhaust fans 250/300/400/450 mm Sweep and cleaning the dust properly, oiling, greasing & over hualing and replacement of defective, burned out parts of bolts and bearings including refixing and connecting up all as directed Note : Replacement of defective/burned out parts will be measured & paid for separately |
| 129 | Supply only Ball bearings suitable for existing exhaust fans as per site. |
| 130 | Supply only copper alloy Bush suitable for existing exhaust fans as per site. |
| 131 | Material and Labour for rewinding of exhaust fans 250/300 mm Sweep with super enameled copper wire of suitable size of any make/type/model including transporation complete all as specified and directed. |
| 132 | Material and Labour for rewinding of exhaust fans 400/450 mm Sweep with super enameled copper wire of suitable size of any make/type/model including transporation complete all as specified and directed. |
| 133 | Supply and fix in replacement of Exhaust fan Steel body ac single phase 230 volt of size 300mm sweep with blades and frame and louvers. Complete all as specified and directed |
| 134 | Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm all as specified and directed. Please Enable Macros to View BoQ information |
