|
| 1 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 2 | Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 4 | Extra for cleaning the old surface by scraping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I |
| 5 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 6 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 8 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 9 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 10 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.- Glazed Vitrified tiles Matt/Antiskid finish of size - Size of Tile 600 x 600 mm |
| 11 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. (SIZE 500X500 MM) |
| 12 | Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 13 | Marble stone flooring with 18mm thick marble stone as per sample of marble shall be approved by Engineer-in-charge over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : |
| 14 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 15 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. |
| 16 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 17 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.(Flat 30x6 mm for diagonal braces and central cross piece) |
| 18 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :( 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 20 | Providing and mixing Liquid Intergral water proofing compound in Conctrete or plaster as per manufacturer specification and as per direction of Eng - in Charge. Brand- Sika Plastocrate plus, |
| 21 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. |
| 22 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 23 | Providing two coats of oil bound distemper of approved shade and make over old surface including washing cleaning and papering the walls, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I. |
| 24 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 25 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 26 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 27 | Easing and adjusting door and window shutters with chaukhats in old work complete as per specification and direction of E/I. |
| 28 | Supplying Un-skilled labour for cleaning the site all complete jobs as per specification and direction of E/I(Cleaning the site and roof surface) |
| 29 | (A) SAND LEAD-6 KM(1K+5P) |
| 30 | (B) STONE CHIP LEAD-22 KM |
| 31 | (C) STONE METAL-52 KM |
| 32 | (D) BRICK LEAD-8 KM(1K+7P) |
| 33 | Supplying, fitting and fixing 550x400x400 mm size viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32 m C.I. brass waste 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32 mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l. |
| 34 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. Of parry Hindustan or any other I.S.S. Approved make with 100mm H.C.I. 'P' trap 15liters C.I. Pull and let go flushing cistern of names or other I.S.S. Equipment make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pert of vitreous white glazed earthenwere were footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.(A) 510 mm long(c) with 10.00 lit. Low level PVC Cistern |
| 35 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware urinal of Hindustan 'Parry' or any other approved I.S.S. make with 5 litres capacity C.i. automatic flusing cistern of reliance for any other I.S.S. approved make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grams, 15mm PVC/Alkthene pipe 450mm longwith brass coupling at both ends and doing plumber joints including priming coat of red oxide, cutting wall and floor making good the same etc. all complete as per specification and direction of E/I.(FLAT BACK OR STANDING CORNER 600X350MM) |
| 36 | Providing and fixing male ended 15 mm dia brass bib cock of approved qulity (wt not less than 350 gms)with extra socket . |
| 37 | Providing and fixing G.M non return valve horizontal/vertical type of approved quality as per specification (Horizontal 25 mm dia ,wt not less than 375 gms)Horizontal non-return valve-25 mm dia wt not less than 375 gms |
| 38 | Vertical non-return valve 25 mm dia wt not less than 375 gms |
| 39 | Providing and fixing 15mm size CP brass pillar cock (wt not less than 350 gms CI body brass spindle pillar cock of approved quality (C.I body brass spindle) |
| 40 | Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l.(25 mm dia and weight not less than 500 gms) |
| 41 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.Mirror of 6 mm thick plate glass beveled edge mirror includind cp brass revolving fitting 3mm plywood board'(600X450 mm) |
| 42 | CP brass dish container |
| 43 | CP brass towel rail 20mmx600mm with bracket container |
| 44 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510 mm bowl depth 200 mm.(Kitchen sink without drain board) |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 15 mm dia |
| 46 | 20 mm dia |
| 47 | 25 mm dia |
| 48 | Making hole in wall for G.I. pipe and restoring the same all cost complete(250 mm dia)(125 mm thick wall, 125 mm dia) |
| 49 | Polythene water storage tank of mark with cover and-suitable locking system in double layer confirming to lS: 12701-1996 with Latest revision. |
| 50 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(110mm ) |
| 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.12.42.1.2 Coupler 110 mm dia |
| 52 | 12.42.2.2 Single pushift coupler110 mm dia |
| 53 | 12.42.4.2 Single tee without door 100 mm dia |
| 54 | 12.42.5.2 Bend 87.5o 110 mm dia |
| 55 | 12.42.6.2 Shoe plain 110 mm dia |
| 56 | WGPVT-wiring for light /point/fan point/exhaust fan/call bell point 1.5 sqmm FRPVC insulated copper conductor….do…all jobs as per direction of E/I (Group-B) |
| 57 | Circuit/submain wiring in PVC conduit:- Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit etc. as required.(2X1.5sqmm+1x1.5sqmm.earth wire) |
| 58 | .(2X2.5sqmm+1x2.5sqmm.earth wire) |
| 59 | S/F Modular type switch socket - Supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required |
| 60 | S/F modular type switch socket supplying and fixing of the following modular switch socket box etc. 5/6 amps 3 pin socket outlet |
| 61 | S/F power plug point with modular type accessories :-supplying and fixing suitable size G.I box with modular plate cover in front on with modular surface or in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch etc |
| 62 | S/F Batten holder:- Supplying and fixing Batten/Angle holder including connection etc as required. |
| 63 | Supplying and fixing 3 pin 5 amps.ceiling rose on the existing junction box/wooden block including connection etc. |
| 64 | 20/22W LED Tube Light |
| 65 | S/F/F 9/10Watt LED Bulb |
| 66 | 1200mm (48\\") Ceiling Fan |
| 67 | S.I.T.C. of following rating LED street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminare shall be confirm to IS:10322 part-5/section-3 and shall be complete with all necessary accessories as required.(60 LED street light) |
| 68 | S/F Modular type electronic fan regulator -Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 69 | S/F Modular boxes, base & cover plate - Supplying and fixing following size/modulaes G.I. box along with modular base & cover plate for modular switches in recess etc. as required.c6 Module 78x205x50 mm |
| 70 | 12 Module 135x205x60 mm |
| 71 | Laying of one number PLCA/pvc insulated and PVC sheated/XLPE power cable of grade excluding 1.1 kv not exceeding 11 kv of size exceeding 120 sq mm direct in ground including excavation and cushioning protective covering and refilling the trench as required. |
| 72 | HYDT: Cost of Drilling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.From 0.00 M to 50.00 M Below G.L |
| 73 | From 51.00 M to 100.00 M Below G.L |
| 74 | From 101.00 M to 125.00 M Below G.L |
| 75 | Supplying and fixing assembling lowering vertical postion in bore well,unplactisized PVC medium casing(CM) pipe of required dia conforming to IS 12818,including labour charge ,fitting & accessories etc (200 mm dia nominal size) |
| 76 | Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 77 | Supplying 100 mm dia submersible pump set confirmining to IS 8034 and motor confirming to IS 9283 Pump shall be suitable for various …..do…do...all jobs as per direction of E/I |
| 78 | Supplying and fixing 3 kva stabilizer of L & T or any approved ISI mark to control the voltage all complete as per specification and direction of E/I |
| 79 | S/F/F Starter pannel board including voltmeter ameter on/off switch and provision for dry run protection as per IS specification for 2 HP SUBMERSIBLE motor pump encased in painted mild steel sheet box with glass front looking arrangement .etc |
| 80 | Providing and fixing cholorinated polyvinyle chloride CPVC pipes having thermal stability for hot and cool water supply including all cpvc plain brass threaded fittings this including jointing of pipes & fitting etc(32 mm nominal dia outer pipes) |
| 81 | 3 Core PVC insulated PVC sheated copper conductor flat submersible cable .supplying flate flexible subermissible cable with cooper conductor etc(3 core 4 sq mm copper wire) |
| 82 | Providing and fixing suitable sized threaded mild steel cap or spot welded plate to the top of the bore well housing casing pipes removal as per requirement (200 mm dia) |
| 83 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 84 | Add 18% for G.S.T. |
| 85 | Labour Cess Please Enable Macros to View BoQ information |
