|
| 1 | (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6cement) as per Manufacturer's specification |
| 2 | Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P.M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X.P.M. & cost of all handling and scaffolding complete as per direction of Engineer-in charge, a) 37.5mm thick |
| 3 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:4 cement mortar15 mm thick plaster |
| 4 | 10 mm thick plaster |
| 5 | Wood work in door & window frame fitted and fixed in position complete including a protective cost of painting at the contact surface of the frame excluding cost of concrete, iron Butt Hinges and M.S. clamp (The quantum should be correted upto three decimals). b)Ordinary teak.a) At ground floor. |
| 6 | Fixed louver shutters of doors and window sasperdesign, including fitting& fixing same inpositionbut excluding the cost of hinges andother fittings in ground floor.25mm thick shutters with 12mm thick valve.(a) Ordinary Teak Wood. |
| 7 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI marki) 75mm. X 47mm. X 1.70mm |
| 8 | ii) 100mm. X 58mm. X 1.90mm. |
| 9 | Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary(a) With new iron screws. |
| 10 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately)a) Upto area 2.5 Sq.m |
| 11 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(i) 150mm long x 12mm dia. Bolt |
| 12 | (ii) 75mm long x 10mm dia. Bolt |
| 13 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 14 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surfaces by sand papering etc. including using of approved putty etc. on the surface , if necessary.(a) On timber or plastered surface :(i) Two coats (with any shade except white) |
| 15 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc |
| 16 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surfaces by sand papering etc. including using of approved putty etc. on the surface , if necessary.a) On steel or other metal surface -with other than hi-gloss of approved quality-(i) Two coats (with any shade except white) |
| 17 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white.For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kgper Mtr. and Interlock member @ 0.612 Kg per Mtr. |
| 18 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)(i) 3 mm thick (weighing 7.4 kg/Sq.m) |
| 19 | Extra for fixing glass panes in steel window. |
| 20 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With 'P' trap |
| 21 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specifications with P.V.C fittings complete, C.I. brackets including two coats of painting to brackets etc. |
| 22 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (i) 600 mm long |
| 23 | Supplying, fitting and fixing bib cock or stop cock.a) PTMT (Polytetra Bib Cock / Stop Cock( Prayag or equivalent) 15 mm |
| 24 | Supplying, fitting and fixing shower of approved brand and make.(i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system |
| 25 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.(i) 530 mm X 430 mm x 180 mm |
| 26 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work PVC Pipes 20 mm |
| 27 | 25 mm |
| 28 | Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid PVC multicavity hollow chamber of 59 mm x 30 mm section with 2.0 mm (+/-0.2 mm) wall thickness. Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanized tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x 30 mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt /tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour and hire of tools and plants and appliances. Carriage of all materials, taxes and all |
| 29 | Supplying, fitting, and fixing black stone slab for use in kitchen slabs, alcoves, wardrobes, etc., laid and jointed with necessary adhesive cement mortar (1:2), including grinding and polishing, as per the direction of the Engineer-in-Charge, in ground floor(a) Slab Thickness 20 to 25 mm |
| 30 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (a) One Coati) Water based interior grade Acrylic Primer |
| 31 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats |
| 32 | Cleaning and removing mud above 2000 litre Water Tank including masonry reservoir. |
| 33 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. |
| 34 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 35 | Add Labour Welfare Cess @ 1% on Total amount over item No. 1 to 30 |
| 36 | Add GST @ 18% on Total amount over item No. 1 to 31 Please Enable Macros to View BoQ information |
