|
| 1 | Sub Head:Scheduled Items |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 5 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 7 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) |
| 9 | Second class kail wood |
| 10 | 35 mm thick shutters |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 12 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 13 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 14 | 12 mm cement plaster of mix : |
| 15 | 1:6 (1 cement: 6 fine sand) |
| 16 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 17 | 1:6 (1 cement: 6 fine sand) |
| 18 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 19 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 20 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : |
| 21 | Old work (one or more coats) |
| 22 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : |
| 23 | One or more coats on old work. |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 25 | One or more coats on old work. |
| 26 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : |
| 27 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 28 | Renewing glass panes, with putty and nails wherever necessary including raking out the old putty: |
| 29 | Float glass panes of thickness 4 mm |
| 30 | Renewing glass panes and refixing existing wooden fillets: |
| 31 | Float glass panes of thickness 4 mm |
| 32 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 34 | Sub-Head: Services |
| 35 | Providing the plumbing services with skilled plumber for attending the day-to-day complaintson urgent basis like repairs to water supply equipments and sanitary installations in the BSNL Compounds within the Municipal limits of Srinagar City during attending of calls on day basis complete as per direction of Engineer-In-Charge. Note: The agency shall provide all the necessary tools & plants , ladder, scaffolding wherever required including mobile phone and conveyance to the worker for attending the complaints. (Nothing extra shall be paid on this account.) The materials / fitting required shall be paid for seperately. |
| 36 | Providing the carpenter services with skilled carpenter for attending the day-to-day complaints on urgent basis like repairs to doors , windows, partitions , pelmets and other fittings etc. in the BSNL Compounds within the Municipal limits of Srinagar City during working hours and working days complete as per direction of Engineer-In-Charge. Note: The agency shall provide all the necessary tools & plants , ladder, scaffolding wherever required including mobile phone and conveyance to the worker for attending the complaints. (Nothing extra shall be paid on this account.) The materials / fitting required shall be paid for seperately. |
| 37 | Providing the Mason services with skilled Mason for attending the day-to-day complaints on urgent basis like repairs to buildings, coumpound walls etc. in the BSNL Compounds within the Municipal limits of Srinagar City during working hours and working days complete as per direction of Engineer-In-Charge. Note: The agency shall provide all the necessary tools & plants , ladder, scaffolding wherever required including mobile phone and conveyance to the worker for attending the complaints. (Nothing extra shall be paid on this account.) The materials / fitting required shall be paid for seperately. |
| 38 | Clearing the chokage of water closet like floor traps gully traps etc includung vertical sewage/ drainage stacks ensuring free flow of sewage all complete including the cost of necessary acids etc. as per the directions of Engineer-in-charge. |
| 39 | Clearing of chocked sewer manhole and removing all rubbish etc. complete in all respect as per the direction of Engineer-in-Charge. |
| 40 | Providing the sewer / drain line services with sewer man for attending the day-to-day complaints like removing of blockage by way of rodding and flushing with requisite quantity of surplus water etc , disinfecting by way of spraying disinfectent etc in the BSNL Compounds and removal of sludge outside the building premises and dumping within the Municipal limits of Srinagar City during working hours and working days complete as per direction of Engineer-In-Charge. Note: The agency shall provide all the necessary tools & plants ,disinfectant , wherever required including mobile phone and conveyance to the worker for attending the complaints. (Nothing extra shall be paid on this account.) The materials / fitting required shall be paid for seperately. |
| 41 | Providing electric welding set including welding rods etc. for repairs of M.S. doors , windows, grills, gates , ladder , railings etc. including the cost of transportation, labour charges etc. all complete as per the directions of Engineer-in-charge. |
| 42 | Re-setting of aluminum door, tightening of cleats etc.replacing of pivots or aluminium hinges or rubber gasket wherever required including steel screws etc. all complete. |
| 43 | Sub-Head:Non-Scheduled Items |
| 44 | Removal of Plantation like Pipal Plant etc. from the roofs, shafts and from other parts of the Building at all heights and removing its roots, and pouring necessary acid or equivalent chemical in the roots of plants and making good the same complete including extra by using the ladder , Jhula, Scaffolding including supporting labourers etc above 3.00 metre from plinth level and upto all heights all complete as per the directions of Engineer-in-Charge. as per direction of Engineer-in-Charge |
| 45 | Disposal of sewerage rubbish / malba / similar waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond municipal limits initial lead, for all loads including all lifts involved. |
| 46 | Repairing of exisiting wooden door/window shutters i/c taking out of door shutters and applying necessary repairs including replacement of damaged styles, rails, hinges etc as required on the site complete as per the directions of EIC ( |
| 47 | Supplying the following items as and when required as per approved brand and approved manufacturer( ISI marked) complete as per direction of Engineer-In-Charge. |
| 48 | Flushing Cistern P.V.C. 10 litre capacity ( low level ) (In all colours as per direction of EIC) |
| 49 | White plastic seat (solid) with lid C.P. brass hinges and rubber buffers |
| 50 | White solid plastic seat cover with lid |
| 51 | Vitreous china flat back wash basin |
| 52 | Flat back wash basin 550 x 400mm |
| 53 | Flexible (coil shaped) PVC waste pipe for sink and wash basin32 mm dia with length not less than 700 mm i/c PVC waste fittings. |
| 54 | Brass face for C.P. brass pillar cocks/ bib cocks/stop cocks etc. |
| 55 | CP stainless jali grating |
| 56 | 100mm dia |
| 57 | CP bass bib cock confirm to IS:8931 |
| 58 | 15mm nominal bore |
| 59 | CP brass angle valve confirm to IS:8931 |
| 60 | 15mm nominal bore |
| 61 | Ball valve (brass) of approved quality, High or lowpressure, with plastic floats |
| 62 | UPVC Ball valve 32 mm |
| 63 | uplasticised PVC connection pipe with brassunions |
| 64 | 30cm length |
| 65 | 15mm nominal bore |
| 66 | 45cm length |
| 67 | 15mm nominal bore |
| 68 | CP spray jet for european wc pan,15mm nominal bore |
| 69 | CP brass pillar cock confirm to IS:8931 |
| 70 | 15mm nominal bore |
| 71 | G.I. pipes of Jindal/ Surya Prakash make for water supply |
| 72 | 15m dia nominal bore |
| 73 | 20mm dia nominial bore |
| 74 | PVC tank cover for all sizes of PVC tank |
| 75 | Brass spindle for C P bib cock / angle valve ,etc |
| 76 | Brass non return valve with lever handle |
| 77 | 15 mm nominial bore |
| 78 | 20 mm |
| 79 | 25 mm |
| 80 | G.I elbow 15mm |
| 81 | G.I elbow 20mm |
| 82 | White Vitrious China Western W.C |
| 83 | Plastic Cyphon for plastic/ vitrious flush tank |
| 84 | UPVC pipe 25mm dia |
| 85 | UPVC 32mm dia pipe |
| 86 | UPVC M.T.A/F.T.A 25mm |
| 87 | UPVC M.T.A/F.T.A 32mm |
| 88 | UPVC Union 25mm |
| 89 | G.I nipple 150mm long and 25mm nominal bore |
| 90 | G.I nipple 300mm long and 15mm nominal bore |
| 91 | G.I socket 15mm nominal bore |
| 92 | G.I tee 20mm nominal bore |
| 93 | G.I tee 15mm nominal bore |
| 94 | G.I union 25mm nominal bore |
| 95 | G.I union 15mm nominal bore |
| 96 | G.I. Tanki Nipple 15 mm |
| 97 | G.I. Tanki Nipple 20 mm |
| 98 | G.I. Tanki Nipple 25 mm |
| 99 | G.I nipple 75mm long and 15mm nominal bore |
| 100 | G.I nipple 100mm long and 25mm nominal bore |
| 101 | G.I nipple 100mm long and 15mm nominal bore |
| 102 | UPVC Union 32mm nominal bore |
| 103 | UPVC elbow 32mm nominal bore |
| 104 | UPVC elbow 25mm nominal bore |
| 105 | UPVC Sluice valve 25mm nominal bore |
| 106 | Brass check valve 25mm nominal bore |
| 107 | Brass check valve (Drop) 25mm nominal bore |
| 108 | UPVC Tee 32mm dia |
| 109 | UPVC Tee 25mm dia |
| 110 | UPVC Socket 25 mm |
| 111 | UPVC reducer 25 x 32 mm |
| 112 | Health Faucet |
| 113 | CP Coupling |
| 114 | PVC Pipe 40 mm NB |
| 115 | PVC Pipe 32 mm NB |
| 116 | PVC Pipe 25 mm NB |
| 117 | PVC elbow 40 mm NB |
| 118 | CP Hexa Nipple 15 mm NB |
| 119 | Kitchen Sink without drainboard |
| 120 | CP waste coupling for sink … |
| 121 | Providing and fixing close hole basin mixer in walls,wash basin etc |
| 122 | Hydraulic door closer tubular type Aluminium section body |
| 123 | Aluminium hanging floor door stopper with twin rubber & stopper |
| 124 | Aluminium Tower Bolts |
| 125 | 200 x 10mm |
| 126 | 150 x 10mm |
| 127 | Aluminium Handles |
| 128 | 100mm |
| 129 | Aluminium Sliding Door bolts |
| 130 | 200 x 16mm |
| 131 | Kail wood in scantling |
| 132 | 18mm thick block board BWP ( commercial ) |
| 133 | 6mm thick plywood BWP( commercial ) |
| 134 | 100mm brass Mortice latch & lock of Godrej or its equivalent make without a pair of handles/ round handles as per requirement at site all complete . |
| 135 | Curtain rod 20mm dia. |
| 136 | SS pipe |
| 137 | Aluminium round shape handle |
| 138 | Double action hydraulic floor spring with stainless steel cover plate |
| 139 | Mild steel wire guage (galvanised) aperture 1.4 mm and 0.50 mm dia wire |
| 140 | Vitrified tile 600x600mm |
| 141 | Chemical for fixing vitrified tiles |
| 142 | Dismantling aluminium/gypsum partition------ |
| 143 | Fixing aluminium sections in paritions, doors,windows ceiling etc --------- |
| 144 | Fixing 12mm thick particle board in paritions, doors,windows ceiling etc |
| 145 | Fixing glazing in paritions, doors,windows ceiling etc -------------- |
| 146 | Rectangular shape 453x357 mm Mirror with Plastic moulded frame |
| 147 | Sub Head : Credit for old dismantled / unserviceable material: - |
| 148 | Brass bib cock/stop cock/ball valves/CP bibcock/CP stop cock,C.P angle cock,CP pillar cock,CP shower rose, brass gate valves, CP ring,CP brass towel rail etc. of all dia |
| 149 | Brass face |
| 150 | Floor spring |
| 151 | Door closer |
| 152 | Brass lock |
| 153 | PVC Bib cock,stop cock, ball cock/WC seat cover, internal fitting of low level PVC cistern etc. |
| 154 | PVC flushing cistern |
| 155 | CP grating of all sizes |
| 156 | PVC Connection/PVC waste pipes |
| 157 | GI pipes |
| 158 | 15mm nominal bore |
| 159 | 20mm nominal bore |
| 160 | GI elbows Please Enable Macros to View BoQ information |
