|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey matching shade complete cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 4 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer)of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 white cement and matching pigment etc., complete.Coarse sand),Jointing with grey cement slurry 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 5 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including ntegrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings,nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 6 | S/F bevelled edge mirror 600 X 450 mm thick ply board back including its fitting complete. |
| 7 | S/Fixing of towel,rail(JAQUAR/Equivalent) i/c all cost of materials,labours,T&P etc. |
| 8 | S/Fixing of C.P.wall Mixer L Bend (JAQUAR/Equivalent)) i/c all cost of materials,labours,T&P etc. |
| 9 | S/Fixing urinal sensor concealed SNR- 51083 with all fitting in/c all labour T&P required complete. |
| 10 | S/Fixing urinal with dome type waste coupling complete JAQUAR URSWH13263 with all fitting in/c all labour T&P required complete. |
| 11 | S/Fixing of C.P Angle Cock(JAQUAR/Equivalent) i/c all cost of materials,labours. |
| 12 | S/Fixing of C.P.Bib Cock (JAQUAR/Equivalent) i/c all cost of materials,labours,T&P etc. |
| 13 | S/Fixing of heallth faucet (JAQUAR/Equivalent) i/c all cost of materials,labours,T&P etc. |
| 14 | S/Fixing of PVC Conection i/c all cost of materials,labours,T&P etc. |
| 15 | Fixing of white viterous WASH BASIN with pedstal ,32mm dia brass waste and union, I/c cutting and mackinggood i/c all cost of material,labour,T&P etc.complete- (full size) |
| 16 | S/Fixing of center Hole Basin C.P.Mixer (JAQUAR/Equivalent)) i/c all cost of materials,labours,T&P etc. |
| 17 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x70x4 mm (ordinary type) |
| 18 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.74.1 250x10 mm |
| 19 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : |
| 20 | Providing and fixing bright finished brass handles with screws etc. complete:125 mm |
| 21 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 22 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness |
| 23 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes |
| 25 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth ncludingnecessary repairs to scratches etc. complete. |
| 26 | Oil bond distemper on old surface with approved make and manufacture and required shade on old work to given an even shade. Two coat on old work |
| 27 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 28 | French spirit polishing : One or more coats on old work |
| 29 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 30 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 31 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters, window sills, facias and imilar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white ement, mixed with matching pigment,epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm Please Enable Macros to View BoQ information |
