|
| 1 | Supplying, installation, testing andcommissioning of Electric driven Main Fire Pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required :(b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming toIS-12615: 2018. (d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(e)Suitable cement concrete foundation duly plastered with anti vibration pads.1620 lpm at 70 m Head |
| 2 | Supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)(b) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal as required.(c) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.(d) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) Suitable cement concrete foundation duly plastered and with anti vibration pads.1620 lpm at 70 m Head |
| 3 | Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)(b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required.(c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018.(d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) Suitable cement concrete foundation duly plastered and with anti vibration 180 lpm at 70 m Head |
| 4 | Supplying, installation, testing and commissioning of electric driven terrace pumpconforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)(b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018.(d) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.(e) Suitable cement concrete foundation duly plastered and with anti vibration pads.900 lpm at 35 m Head |
| 5 | Control Panel Fabrication, supplying, Installation testing &commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection withsuitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable foroperation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required INCOMING250A, 50kA 4 Pole MCCB, Ics=100% Icu ratingDigital Voltmeter 0-500V with selector switchDigital Ammeter (0-250 A) with selector switch &CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300AOUTGOING( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)Main Fire Pump125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFFoperation.Jockey Pump63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Diesel Engine Control for diesel engine comprising Automatic/Manual selector switch & 3 attemptsstarting device, timers and relays as required, push buttons, start/stop in manual modeIndicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indicationBattery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC AmmeterAll standard relays and accessories for automatic operation of diesel engineSystem Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers.Sensors, annunciation window for fault indication, complete as per specification |
| 6 | Pipes and accessoriesProviding laying, testing & commissioning of 'C'class heavy duty MS Pipe conforming to IS1239/Class -II of IS: 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221,refilling the trench etc. of following sizes complete as required. |
| 7 | 200 mm dia ( wall thickness - 6.3 mm ) |
| 8 | 150 mm dia |
| 9 | Providing, laying, testing & commissioning of 'C'class heavy duty MS pipe conforming to IS1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 10 | 25 mm dia. |
| 11 | 40 mm dia |
| 12 | 65 mm dia |
| 13 | 80 mm dia |
| 14 | 100 mm dia. |
| 15 | 150 mm dia |
| 16 | 200 mm dia |
| 17 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required |
| 18 | Single headed Stainless steel |
| 19 | PSupplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chainas required |
| 20 | Single headed Stainless steel |
| 21 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS904 as required: |
| 22 | 4way - 150mm dia M.S. Pipe |
| 23 | Supplying, fixing, testing and commissioning ofbutterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required |
| 24 | 40mm dia |
| 25 | 65 mm dia |
| 26 | 80 mm dia |
| 27 | 100 mm dia |
| 28 | 150 mm dia |
| 29 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : |
| 30 | 40 mm dia |
| 31 | 65 mm dia |
| 32 | 80 mm dia |
| 33 | 100 mm dia. |
| 34 | 150 mm dia |
| 35 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. |
| 36 | SProviding, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required |
| 37 | 40 mm dia |
| 38 | 80 mm dia |
| 39 | 100 mm dia |
| 40 | 150 mm dia |
| 41 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange |
| 42 | 80 mm dia |
| 43 | 150 mm dia |
| 44 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.(a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585 (b) 20 mm nominal internal dia gun metal globe valve & nozzle.(c) Drum and brackets for fixing the equipment’s on wall. (d) Connections from riser with 25 mm dia stop gunmetal valve & M.S. Pipe and socket. |
| 45 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: |
| 46 | Stainless steel (Grade 304) |
| 47 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required |
| 48 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : |
| 49 | Pendent Sprinkler |
| 50 | Providing & fixing of pressure switch/pressure gauge in M.S. pipe line including connection etc. as required. |
| 51 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required |
| 52 | 100 mm dia |
| 53 | 150 mm dia |
| 54 | Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : |
| 55 | 150 mm dia |
| 56 | Supply, installation, testing and commissioning of gun metal ball valve for priming and draining all fixtures and accessories complete in all respect as required. |
| 57 | 15 mm NB |
| 58 | 25 mm NB |
| 59 | 40 mm NB |
| 60 | Providing fitting fixing of 1000 litre PVC priming Tank with structural support and necessary connection with all fixtures and accessories complete as required , as per approved make |
| 61 | Supply erecting , testing and commissioning of standard double door house indoor cabinet 750 mm x 600 x 250 mm to accommodate two pieces of hose pipe along with one pair of male and female coupling , one branch pipe and and 20 mm dia noozle confirming to IS 903, suitable to interconnect to hose pipe coupling etc. as directed by engineer in charge. the Cabinet is to be made of 20 SWG MS sheet, Glass fronted door with hinged door, glss braking hammer and locking arrangement by alian key etc. the cabinet is powder coated to scarlet red colour etc. completed as per direction of the engineer in charge, as per approved make. |
| 62 | Supply, installation, testing and commissioning of power & control cable including termination from fire control motor panel to motors, control switch including necessary lugs and glands, necessary fixtures and accessories complete in all respect as required.4 core power cable with 8 S.W.G Bare copper earth wire from main electrical panel to Pump panel and from pump panel to Motor Input. |
| 63 | 16mm² XLPE insulated copper armoured cable |
| 64 | 4mm² XLPE insulated copper armoured cable |
| 65 | Control cable 12C X 1.5 Sq mm CU |
| 66 | Portable Fire Extinguisher |
| 67 | Providing installation of co2 fire extinguisher 2 kg capacity cylinder(CEASEFIRE, KANEX, Minimax, Newage make) conforming to IS:15683:2018Fire rating 21B type etc complete as per direction of Engineer-in-charge. |
| 68 | Providing, installation of ABC powder type (Stored Pressure) fire extinguisher 6.0 kg capacity cylinder (CEASEFIRE, KANEX, Minimax, Newage make) conforming to IS: 15683: 2018, Fire rating 4A, 144B type etc complete etc complete as per direction of the Engineer-in-charge. |
| 69 | Providing & Fitting fixing of Dry Chemical Powder (DCP) stored pressure Fire Extinguisher 6 kg capacity Cylinder(IS):15683fire rating 144B with discharge hose &nozzle will be in the different places of Auditorium Building etc as per direction of the Engineer-in-charge |
| 70 | Providing & fitting fixing at electrical Sub-panel of fire suppression system (Fire Spot Panel protection system) 2 kg type extinguishing UL listed clean agent, Hexafluropropane (HFC 236fa) portable type (CEASEFIRE, KANEX, Minimax, Newage make) & the tank should be made of mild steel grade CR1 of IS: 513, Dip tube container of 2 kg capacity withstanding a working pressure of 80 bar discharging percentage minimum 95 percent of initial charge area coverage should be 9.03 cum including pressure gauge adapter, pressure swit charge. switch etc complete as per direction of the Engineer-in-charge |
| 71 | Providing & fitting fixing of electrical Main-panel of fire suppression system (Fire Spot Panel protection system) 4 kg type extinguishing UL listed clean agent, Hexa fluropropane (HFC 236fa) portable type (CEASEFIRE, KANEX, Minimax, Newage make) & the tank should be made of mild steel grade CR1 of IS: 513, Dip tube container of 2 kg capacity withstanding a working pressure of 8 bar test pressure of 35 Bar and a minimum pressure of 80 Bar, discharging percentage minimum 95 percent of initial charge area coverage should be 9.03 cum including pressure gauge adapter, pressure switch etc complete as per direction of the Engineer-in-charge |
| 72 | Providing & fitting fixing of Fire Suppression Monitoring panel, with 4 Zone / 4 nos input (for pressure switch connection), input power 230 volts, 50 hz, stand by power24 volt, inbuilt battery 2 X 12 volt-1.3 h, LED indicator etc complete as per direction of the Engineer-in-charge Please Enable Macros to View BoQ information |
