|
| 1 | SUB-HEAD : BUILDING PORTION |
| 2 | Earth work in excavation over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soilBy manual means |
| 3 | Extra for additional lift of 1.5m or part thereofAll kinds of soil |
| 4 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soilBy manual means |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.All kinds of soil |
| 6 | 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size) |
| 8 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 9 | Foundations, footings, bases for columns. |
| 10 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufactureer's specification. |
| 11 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 12 | SUB-HEAD : RCC WORK |
| 13 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement. |
| 14 | All work upto plinth level. |
| 15 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- |
| 17 | In walls (any thickness), including attached pilasters, buttresses, piers, abutments etc. |
| 18 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 19 | In plinth and skirting courses, fillets, columns, pillars, posts and struts |
| 20 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 21 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- |
| 22 | RCC work in suspended floors, roofs having slope upto 15° landings, balconies, shelves and chajjas. |
| 23 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 24 | RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase. |
| 25 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 26 | Providing and laying upto floor five level reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers facias and eaves boards excluding the cost of centring, shuttering, finishing and reinforcement- |
| 27 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 28 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level. |
| 29 | Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars |
| 30 | Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits. |
| 31 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including he cost of reuired centering shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). |
| 32 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 33 | Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 34 | Walls (any thickness ) including attached pilasters, butresses, plinth and string courses etc. using shuttering ply |
| 35 | Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply |
| 36 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 37 | Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 38 | Stairs (excluding landings) except spiral-staircases with wooden plank |
| 39 | Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards. |
| 40 | Edges of slabs and breaks in floors and walls under 20 cm. wide |
| 41 | Weather shade, Chajjas, corbels etc., including edges. |
| 42 | SUB-HEAD : BRICK WORK |
| 43 | First class brick work in foundation and plinth including cost of all materials as required complete. |
| 44 | In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 45 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete. |
| 46 | In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 47 | Half brick masonry with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- |
| 48 | In cement mortar 1:4 ( 1 cement : 4 fine sand). |
| 49 | Extra for providing & placing in position 2 nos 6mm dia MS bars at every 4th course of half brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete:- |
| 50 | In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 51 | SUB-HEAD : MARBLE WORK |
| 52 | Providing and fixing 18 mm thick plain marble stone, mirror polished, machine cut for, kitchen platforms, vanity counters, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing , curing etc. complete at all levels as required:- |
| 53 | Granite of any colour and shade duly approved |
| 54 | Area of slab upto 0.50 sqm. |
| 55 | Extra for providing edge moulding to 18 mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge:- |
| 56 | Granite work. |
| 57 | SUB-HEAD : WOOD & PVC WORK |
| 58 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : |
| 59 | Karai wood |
| 60 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters. |
| 61 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 62 | Providing 50 × 50 × 50 mm Gamair wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) and making good the walls etc. |
| 63 | Providing and fixing Gamair Wood plain lining tongued and grooved on and including wooden plugs complete with necessary screws and priming coat on unexposed surface. |
| 64 | 25 mm thick |
| 65 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. |
| 66 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 67 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size) |
| 68 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 69 | 300 x 16 mm |
| 70 | 250 x 16 mm |
| 71 | Providing and fixing aluminium tower bolts ISI marked anodised (anodised coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 72 | 300 x 10 mm |
| 73 | 250 x 10 mm |
| 74 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 75 | 125 mm |
| 76 | 100 mm |
| 77 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 78 | Single rubber stopper |
| 79 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers' specification and direction of Engineer-In-Charge. |
| 80 | Providing and fixing to existing door frames,30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 110mm width out of which 90mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 110mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 130mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) |
| 81 | thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing. |
| 82 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. |
| 83 | SUB-HEAD : STEEL WORK |
| 84 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required. |
| 85 | Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete. |
| 86 | Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:- |
| 87 | M.S. tube |
| 88 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:- |
| 89 | In stringers, treads, landing etc. of stair cases including use of chequered plate wherever required, all complete. |
| 90 | Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design. |
| 91 | SUB-HEAD : ALUMINIUM WORK |
| 92 | Providing and fixing aluminium work for doors, windows, ventilators, stair railing including hand rail and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling to be paid for separately) :- |
| 93 | For fixed portion of approved quality:- |
| 94 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 95 | For shutters/ sliding shutters of doors, windows & ventilators including providing and fixing hinges / pivots / rollers and making provision for fixing fittings wherever required including the cost of PVC / neoprene gasket required of approved quality ( Fittings shall be paid for separately ):- |
| 96 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 97 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition frames with PVC / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge :- |
| 98 | With glass/ float glass panes of 4.0 m thickness ( weight not less than 10.0 kg / sqm ) |
| 99 | With glass/ float glass panes of 5.5 m thickness ( weight not less than 13.50 kg / sqm ) |
| 100 | Providing and filling the gap in between aluminium frame and adjacent RCC / brick work by providing weather silicon sealant over backer rod of approved quality etc. complete as per architectural drawing and direction of the Engineer-in charge:- (i) Upto 5 mm depth and 5 mm width |
| 101 | Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-in-charge:- |
| 102 | 255 x 19 mm |
| 103 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality complete as per direction of Engineer-in-charge:- |
| 104 | Anodised aluminium of grade AC 15 ). |
| 105 | SUB-HEAD : FLOORING AND SKIRTING WORK |
| 106 | Providing and laying 1st quality ceramic glazed floor tiles 300 x 300 mm conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in colours, shades such as white, ivory, grey, fume red, brown over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 107 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 108 | Providing and fixing 18 mm thick Marble stone (area not less than 0.1sqm each) in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade, including rubbing and polishing complete. |
| 109 | Raj Nagar plain marblecomplete. |
| 110 | Providing and fixing Marble tiles in skirting, risers of steps, dado etc. ( upto 2 m height ) over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade complete |
| 111 | 8mm thick Rajnagar marble tiles (polished) |
| 112 | Providing and fixing Kota stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishing complete. |
| 113 | Kota stone slab 25mm thick |
| 114 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. |
| 115 | 40 mm thick |
| 116 | Providing and fixing 22 mm thick pre-polished colored concrete designer tiles making by strong vibratory compaction technology using 50% white cement and 50% ordinary cement of size 300mm x 300mm, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete as per direction of the Engineer-in-charge. |
| 117 | SUB-HEAD : ROOFING AND CEILING WORK |
| 118 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: |
| 119 | Single socketed pipe - 110 mm OD |
| 120 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: |
| 121 | Coupler110mm |
| 122 | (ii) Single equal tee without door - 110 x 110 x 110 mm |
| 123 | (iii) Single equal tee without door - 110 x 110 x 110 mm |
| 124 | (iv) Bend 87.5o - 110mm |
| 125 | (v) Plain shoe - 110 mm |
| 126 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete. |
| 127 | 110mm |
| 128 | Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete. |
| 129 | 100mm |
| 130 | SUB-HEAD : FINISHING WORK |
| 131 | 12 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. |
| 132 | In cement mortar 1 : 4 (1 cement : 4 fine sand) |
| 133 | In cement mortar 1 : 6 (1 cement : 6 fine sand) |
| 134 | 15 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. |
| 135 | In cement mortar 1 : 6 (1 cement : 6 fine sand) |
| 136 | 6 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. |
| 137 | In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) |
| 138 | Neat cement punning. |
| 139 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including a priming coat of cement primer to give an even shade complete. |
| 140 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.43 kg/10 sqm ) over and including base coat water proofing cement paint applied @ 2.20 kg/10 sqm complete. |
| 141 | Applying priming coat: |
| 142 | With ready mixed pink primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 143 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work. |
| 144 | Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade. |
| 145 | SUB-HEAD:WATER PROOFING WORK |
| 146 | Providing and laying grading of roof for water proofing treatment complete as required as per direction of the Engineer-in-charge:- |
| 147 | Cement concrete 1:2:4 ( 1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size ). |
| 148 | Cement mortar 1:4 (1 cement : 4 fine sand ) |
| 149 | Providing and applying heavy duty Polymer modified acrylic base, two component polymer membrane water proofing coating 2 (two) coats over sunken floor, bathroom etc. by mixing polymer liquid and powder at 1:4 ratio using 3.00 kg / sqm at floor and wall including cleaning the surface and saturated the same with clean water and chamfering the junction between sunken floor and wall by 15 mm thick cement plaster, 1:3 mixed with SBR base latex powder using 0.200 kg/sqm upto a height of 150 mm on wall and 150 mm on floor surface before application of polymer membrane and finally 12 mm cement plaster 1:4 ratio mixed with water proofing admixture 100 gm / 50 kg bag of cement complete as per direction of Engineer-in-charge and technical specifications. After completion a Pond test should be conducted by Ponding about 150 mm water for three days, both in the sunken portion and in the normal level floor area. |
| 150 | SUB-HEAD : SANITARY WORKS |
| 151 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 152 | White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 153 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 154 | W.C. pan with ISI marked white solid plastic seat and lid |
| 155 | Providing and fixing White vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively |
| 156 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 157 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: |
| 158 | Flat back wash basin of size 550x400mm. |
| 159 | Providing and fixing kitchen sink including making all connections excluding cost of fittings.: |
| 160 | White glazed fire clay sink of size 600x450x250mm. |
| 161 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 162 | Semi rigid pipe |
| 163 | 32 mm dia |
| 164 | Flexible pipe |
| 165 | 32 mm dia |
| 166 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 167 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 168 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms |
| 169 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms |
| 170 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 171 | Providing and fixing soil, waste and vent pipes: |
| 172 | 100 mm dia. |
| 173 | Sand cast iron S&S pipe as per IS: 1729. |
| 174 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : |
| 175 | For 100 mm dia. Pipe |
| 176 | Providing and fixing heel rest sanitary bend |
| 177 | 100 mm dia |
| 178 | Sand cast iron S&S as per IS - 1729 |
| 179 | Providing and fixing single equal plain junction of required degree |
| 180 | 100x100x100 mm |
| 181 | Sand cast iron S&S as per IS - 1729 |
| 182 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 183 | 100x100x100 mm |
| 184 | Sand cast iron S&S as per IS - 1729 |
| 185 | Providing and fixing double equal plain junction of required degree. |
| 186 | 100x100x100x100 mm |
| 187 | Sand cast iron S&S as per IS - 1729 |
| 188 | Providing and fixing collar: |
| 189 | 100 mm |
| 190 | Sand cast iron S&S as per IS - 1729 |
| 191 | Providing and fixing sand cast iron S&S offsets as per IS: 1729 |
| 192 | 152 mm offsets |
| 193 | With 100 mm dia. Pipe |
| 194 | Providing and fixing terminal guard: |
| 195 | 100 mm |
| 196 | Sand cast iron S&S as per IS - 1729 |
| 197 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: |
| 198 | 100mm |
| 199 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: |
| 200 | 100 mm inlet and 100 mm outlet |
| 201 | Sand Cast Iron S&S as per IS: 1729 |
| 202 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand): |
| 203 | 100 mm dia. |
| 204 | SUB-HEAD : WATER SUPPLY |
| 205 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Inernal work - Exposed on wall. |
| 206 | 15 mm dia. nominal bore |
| 207 | 20 mm dia. nominal bore |
| 208 | 25 mm dia. nominal bore |
| 209 | 40 mm dia. nominal bore |
| 210 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 211 | 25 to 40 mm nominal bore |
| 212 | Providing and fixing brass bib cock of approved quality : |
| 213 | 15 mm nominal bore |
| 214 | Providing and fixing brass stop cock of approved quality : |
| 215 | 15 mm dia nominal bore |
| 216 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 217 | 25 mm nominal bore |
| 218 | 40 mm nominal bore |
| 219 | Providing and fixing gun metal non-return valve of approved quality (screwed end): |
| 220 | 25 mm nominal bore |
| 221 | Vertical |
| 222 | 40 mm nominal bore |
| 223 | Vertical |
| 224 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 225 | Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement :5 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : |
| 226 | With Second Class bricks |
| 227 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work : |
| 228 | 15 mm diameter pipe. |
| 229 | 20 mm diameter pipe. |
| 230 | 25 mm diameter pipe. |
| 231 | 40 mm diameter pipe. |
| 232 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
| 233 | 15 mm diameter pipe |
| 234 | 20 mm diameter pipe |
| 235 | 25 mm diameter pipe |
| 236 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 237 | 20 mm nominal bore. |
| 238 | 25 mm nominal bore. |
| 239 | 40 mm nominal bore. |
| 240 | SUB-HEAD : SEWAGE AND DRAINAGE WOPRKS |
| 241 | Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete : |
| 242 | 150 mm diameter |
| 243 | Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design: |
| 244 | 150 mm diameter S.W, pipe |
| 245 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 246 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : |
| 247 | Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : |
| 248 | Extra for depth beyond 450 mm of brick masonry chamber for underground C.I. inspection chamber with same specification as mentioned in item no 20.330 complete as per standard design : |
| 249 | For 500x700 mm size Please Enable Macros to View BoQ information |
