|
| 1 | GENERAL CIVIL WORK for Toilet Construction |
| 2 | SCOPE: Construction of Toilet Blocks (4 nos. Female) including supply and instalation of all fitting, fixure, Sanitary items, Indian and Europian WC, wash basin, electrical wiring and fixures, drainage, provision of water supply, floor tiling, wall tiling and other consumables, labours, tools tackles etc required for complting the work for making it operational) : |
| 3 | A tetative drawing of toilet blocks is attached herewith however, the design and architectural drawings pertaining to Toilet Blocks for Male & Female Washrooms (Toilet Blocks) are to be provided by the bidder/vendor for approval before start of work. |
| 4 | The rate quoted/agreed by the vendor is all inclusive and inclusive of all tools, tackle, labour, consumable, material and not limited to this and all required items to complete the work as per directions of Engineer-in-charge. [Rate to include whitening, scaffolding, shuttering, bar binding, tools & tackles etc complete. |
| 5 | EARTH WORK IN EXCAVATION & BACKFILLING |
| 6 | Surface dressing & Earth work in excavation for foundations and plinth beams etc to line and level as per foundation drawings, stacking the excavated material on the sides of excavation and backfilling selected material in layers not exceeding 200mm thickness, and compacting to 95% modified proctor density after the concreting works are completed upto ground level and dispose of the surplus material as per directions of Engineer-in-charge within the plant boundary. |
| 7 | Providing and filling of good soil, to be brought from outside and spreading / filling the same in layers under foundations & Floors and compacting in layers to give at least 90% of maxm dry density as per IS: 2720. Rate to include cost of soil, transportation, all testing, rolling, watering etc all complete as per specifications and directions of Engineer-in-Charge. |
| 8 | Providing and laying stone soling with stones of size 40-90 mm in layers not exceeding 75 mm including filling of voids with material like bajri, stone grits etc and compacting as per specifications and directions of Engineer-in-Charge. |
| 9 | SAND FILLING |
| 10 | Providing and filling 200 mm Thk clean and well graded coarse sand in foundations, under floors including spreading in 100 mm layers compacting and tamping to the maximum density as specified and as directed by the Engineer-in-charge. |
| 11 | PLAIN CEMENT CONCRETE |
| 12 | Providing and Laying plain cement concrete (1:2:4) with 40mm and down size graded stone aggregate as leveling course in foundations, under grade slabs, plinth beams etc.including tamping, curing shuttering etc.complete for all depths and heights.(OPC 43 grade) |
| 13 | Providing and laying 40 MM thk DPC in two layers in concrete M20, with admixture of waterproofing compound |
| 14 | (1) Wall 230 |
| 15 | (2) Wall 115 |
| 16 | REINFORCED CEMENT CONCRETE |
| 17 | Providing and laying cast-in-situ reinforced concrete of grade M-25 with 20 mm and down crushed stone aggregate in foundations and superstructures in all types of structures like foundations, pedestals, columns, beams,slabs,stair treads and risers etc. including providing bitumen painting on surface in contact with soil but excluding the cost of reinforcement bars which shall be paid under a separate head and placing in position all inserts and anchor bolts etc. at all depths and heights complete as per drawings, specifications and direction of the Engineer-in-Charge.Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials, such as minimum 43 grade cement including sulphate resistant cement for sub structures, R/F steel, Inserts, bolts, conduits, bitumen, other minor construction materials, shuttering staging, testing of concrete, curing etc. with all bye works and sundry works. |
| 18 | Cent & Shuttering Below Depths |
| 19 | Cent & Shuttering For All |
| 20 | HYD REINFORCEMENT |
| 21 | Providing and fixing in position reinforcement bars of various diameters for all RCC work, at any elevation as per detailed design and drawings including de rusting, straightening, cutting, bending, hooking and tying in position with 16 SWG soft annealed wire and supporting as required complete as specified and directed ( Preferred material:-Tata steel, Sail or JSW) |
| 22 | BRICKWORK & FINISHES |
| 23 | Providing and laying 230 thik brick wall of class designation 5 on frame beam in 1:6 cement mortar, including plastering on the both faces (Inner & External) with 12 mm thick plaster in 1:6 cm and other face with plaster in 2 coats, the under layer 12 thick in 1:5 cm using coarse sand and finished with a top layer 6mm thick in 1:6 cm. ( Preferred material:-First Class Brick) |
| 24 | HALF BRICK MASONARY |
| 25 | Half Brick masonry partition wall in 1:4 CM using class designation 5 reinforced with 2-Nos of 6 dia bars embedded at every third course including plastering on the Both faces (Inner & External) with 12 mm thick plaster in 1:6 cm. ( Preferred material:-First Class Brick) |
| 26 | Providing and installation of : Doors / windows / ventilators / exhaust-fans as per item description; |
| 27 | Water proof laminated doors of Size 1000 mm(W)x2000 mm (H) x 75 mm (T); ( Preferred material:- Alteza/Alcoi/Jindal) |
| 28 | Exhaust fan with Louvers of 480 dia; ( Preferred make:-Crompton Greaves, Havells or Bajaj Electricals) |
| 29 | Providing and installation of: Floor / dado / skirting / internal-wall / external-wall / ceiling as per schedule of finishes |
| 30 | Kota Stone including Flooring/Skirting/Riser/dado |
| 31 | Acid proof vitrified tiles including Flooring/Skirting/Riser/dado |
| 32 | 7.3 mm thk,600x600 non skid ceramic tiles on 20 mm thk.cement mortar 1:4 Flooring & internal wall tiles; ( Preferred make:-Kajaria/Somany/Orientbell) |
| 33 | SEPTIC TANK |
| 34 | Providing and construction of Septic tank of size 2000 x 900 x 1700 deep (Clear in to in dimensions) with wall in brick masonry and base and top slab in RCC M-20 with FRC manhole cover of HD-60 capacity, complete in all respect as per scope of work and detailed construction drawing. Rate to include cost of all labor, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement including chemical resistant paint for sub-structures, bricks, reinforcement steel, inserts, bolts, covers, aggregates/ sand fill conduits, finishes, bitumen, other minor construction materials, shuttering, staging, earth work in excavation in any kind of soil including hard murrum, soft rock, hard rock by pneumatic drilling etc. and backfilling using serviceable / borrow earth in all conditions, shoring / strutting, bailing and pumping out water, masonry work, plastering, plumbing, sanitation etc. with all bye works and sundry works. (As per IS 2470 Part 1 & 2) |
| 35 | SOAKPIT |
| 36 | Providing and construction of soak pit of size 2500mm diameter and minimum 4.20m deep with 350mm th. side wall in hollow brick masonry and top slab in RCC M-20/M25 as specified in drg, with FRC manhole cover of HD-60 capacity., complete in all respect as per scope of work and detailed construction drawing. Rate includes cost of all labor, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 / 53 grade cement including chemical resistant paint for sub-structures, bricks, reinforcement steel, inserts, bolts, covers, aggregates/ brick bats filling in 1.00 mt depth as shown in drawing and other all minor construction materials, shuttering, staging, earth work in excavation and backfilling using serviceable earth / earth brought from outside, shoring / strutting, bailing and pumping out water, masonry work, plastering, plumbing, sanitation etc. with all bye works and sundry works. (As per IS 2470 Part 1 & 2) |
| 37 | Plastic Emulsion Paint on internall wall |
| 38 | White Wash - Supplying and applying 3 coats of paints on internal & external walls surfaces in approved colour at all heights as per scope of work and recommendations of manufacturer including surface preparation, primer putty etc. technical specifications and directions of the Engineer-In-Charge. White washing with Dehradun/Rajasthan lime in 3 or more coats to give an even finish including the cost of adding required adhesive (DDL), blue pigment (Robin Blue) etc. on walls, ceiling etc. complete in all respects as per scope of work, detailed construction drawings, technical specifications and directions of the Engineer-in-charge. ( Preferred material:-Asian/Berger/Nerolac) |
| 39 | WATER SUPPLY |
| 40 | Providing and laying medium duty GI pipes with all fittings and specials for 20mm dia potable water supply lines of toilet blocks.The buried portion of pipe shall be painted with 2 coats of bitumastic paint and rolled in sand and overground portion shall be concealed in the wall and painted with anticorrosive bitumastic paint including cutting of chases in the wall and making the wall good.( Preferred material:-Tata/Jindal/Surya) |
| 41 | SANITARY WORKS |
| 42 | Providing and installing 4-No toilet consisting of 2 Nos. European type WC & 2 Nos. Indian type WC with white HDPE Flushing cistern, CP flush bend having plastic seat cover and lid. ( Preferred make:-CERA/Hindware,/Parryware) |
| 43 | Providing and installing of 3 Nos of Men's Urinal with Flushing arrangement including all fittings and fixures , tap valves, tubes, pipes etc to complete the work and to make it operational. ( Preferred make:-CERA/Hindware,/Parryware) |
| 44 | Providing and installing wall mounted type small Wash Basin including all fittings and fixures , tap valves, tubes, pipes etc to complete the work and to make it operational. ( Preferred make:-CERA/Hindware,/Parryware) |
| 45 | Providing and installing of 1-Nos of 1000 litre Sintex water overhead tanks including supply, installation of all necessary GI and CP fittings, flow traps, plumbing and providing and laying of piepline till all toilet, urinals, wash basin etc. with provision of inlet and outlet pipeline and connectivity with water supply source. |
| 46 | Providing and installing including supply of necessary GI and CP pipe & fittings, taps, flow traps, plumbing and providing and laying of HCI sanitary piping to Septic Tank and Soak Pit as per the no. of construction of Toilets above. ((Pipes & Fittings CPVC Preferred make:-Astral Pipes/Ashirvad Pipes/Finolex Pipes). For GI Pipe ( Preferred make:-Tata Pipes/Jindal Pipes/Surya Roshni). For CP Fittings (Taps & Valves) ( Preferred make:-Jaquar /Hindware/ CERA Sanitaryware, Kohler) |
| 47 | ELECTRICAL WORKS |
| 48 | Supplying and carrying out concealed wiring for Electrical Installations as per Schedule of Lighting fittings and Fixtures and exhaust fans etc given in the Architectural drawing |
| 49 | Providing and installing Electrical fittings and fixtures as per table given in Architectural drawing; |
| 50 | LED Lights of max 15 W ( Preferred make:-Wipro/Havells/Philips) |
| 51 | Plug Point for Light; ( Preferred make:-Anchor/Havells/Schneider Electric) |
| 52 | Plug Point for Power ( Preferred make:-Anchor/Havells/Schneider Electric) |
| 53 | Installation of On/ Off Switch ( 6 AMP ) ( Preferred make:-Anchor ) |
| 54 | Switch Socket , 6 AMP |
| 55 | MCB , 32 AMP |
| 56 | Letter Writing for Toilet Block ( 180 Inch X 16 Inch ) |
| 57 | BOREWELL ( 4.5 inch Dia )Drilling Cost |
| 58 | SUPPLY & ERECTION PVC CASING PIPE ( 6 inch Dia ) ( JINDAL MAKE ) |
| 59 | SUBMERSIBLE PUMP SYSTEM & INSTALLATION |
| 60 | GENERAL REQUIREMENTS & SCOPE |
| 61 | SCOPE: Supply, installation, testing, and commissioning of a complete Submersible Pump Set capable of delivering a minimum flow of 50 LPM against the required site-specific Total Dynamic Head (TDH), including all components, accessories, labor, tools, and consumables required to make the system fully functional and operational. |
| 62 | PUMP SET & CONTROL SYSTEM |
| 63 | Submersible Pump Set (Pump & Motor): Supply of one new, multi-stage, radial/mixed flow Submersible Pump and Motor. The Motor shall be 2 HP, 3-Phase, 415V, 50Hz (or approved single-phase if 3P is unavailable), Stainless Steel (SS-304/316) construction, with a hermetically sealed, water/oil-filled rewindable motor. Required Capacity: Min. 50 LPM at X meters TDH (Total Dynamic Head - site-specific). ( Preferred make:-Kirloskar/Crompton Greaves/CRI Pumps) |
| 64 | Submersible Pump Control Panel: Supply and installation of a suitable IP 54/65 weather-proof control panel including: DOL/Star-Delta starter, Voltmeter, Ammeter, Phase protection relay, and an integrated Dry-run/Low Water Level Protection Unit. ( Preferred make:- L&T (Larsen & Toubro)/Siemens/Schneider Electric/Havells/ABB) |
| 65 | SS Safety Rope: Supply of safety rope (min. 4mm diameter) for securing the pump motor assembly inside the well/borewell.(Material Grade: Mandates SS 304 (Standard Stainless Steel) or the more corrosion-resistant SS 316 and IS 2266) |
| 66 | Submersible Flat Cable: Supply and installation of ISI marked, 3-core, PVC/XLPE insulated, copper conductor flat submersible cable of adequate cross-sectional area (min. 4 sq.mm) for the total installation depth.( Preferred make:-Polycab/Finolex/Havells and IS 694) |
| 67 | INSTALLATION & ANCILLARY WORKS |
| 68 | Column Pipe & Fittings: Supply and installation of heavy-duty GI or uPVC column pipe of minimum 50 mm (2 inches) nominal diameter, with all necessary couplings, pipe clamps, and adapters for the total installation depth. .( Preferred make:-Finolex/Ashirvad Pipes/Astral Pipes) |
| 69 | Borewell Head & Valves: Supply and installation of a rigid borewell head/surface plate, discharge elbow, a heavy-duty Non-Return Valve (Check Valve) immediately above the pump, and a 50 mm/2 inch Gate/Ball Valve at the discharge point.( Preferred make:-Ashirvad, Supreme, Kirloskar) |
| 70 | Civil Works & Earthing: All necessary civil works for installation, including foundation bolts for the borewell head, construction of a small Pump Head Protection Chamber (min. 1m×1m×0.5m deep) with a locking cover, and proper Electrical Earthing for the motor and panel as per safety standards. |
| 71 | Final Installation, Testing & Commissioning: Complete labor and services for lowering, aligning, connection, pre-commissioning checks, and final performance testing of the system to demonstrate the required flow rate (50 LPM). |
| 72 | Dismantling of existing brick masonry structure in cement mortar including plaster, foundation and superstructure (as shown at site), by manual means, including dismantling of PCC/CC (if any), stacking of serviceable materials, and disposal of unserviceable debris within 50 m lead, complete as per direction of Engineer-in-Charge. |
| 73 | Construction of Wash Basin Area with Shed FacilityProviding and constructing wash basin area including supplying and fixing wash basins with fittings, GI/PVC pipeline connections, proper drainage system, and constructing platform with cement concrete and tile finish. The work includes fabrication and erection of shed using MS frame with CGI/PPGI/polycarbonate sheet roofing, complete with all fixtures, fasteners, painting, and finishing, as per approved design and direction of Engineer-in-charge Please Enable Macros to View BoQ information |
