|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 2 | Providing and laying Stone solling Hand packed including compacting, watering including all carriages of material complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level (1:4:8) (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)incl all carriages 20mm nominal size) Crushed. (All Works up to Plinth level) raft |
| 5 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:2:4 coarse sand 20mm nominal size crushed stone agg.) |
| 6 | Centering and shuttering including strutting propping etc. removal of form work in Raft,foundation and plinth (All works upto Plinth level) |
| 7 | Filling with nallah muck in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited Layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 1:4 (1 cement and 4 coarse Sand ) including curing incl Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto first floor level |
| 9 | Providing and fixing of wood work in frames of door/ window /arch windows /ventilator wrought frames (chowkats) imported Kd Wood. |
| 10 | Providing and fixing 40 x5mm flat iron hold fast including fixing of frames with nuts and bolts. |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, Coloumns, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).incl all carriages Crushed Aggrigrates. |
| 12 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for:Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 14 | Structural steel work welded in built up sections and frame work including cutting, hoisting fixing in position all complete in angles / flats / tubes including MS sheet for chejja,soffits and eveas boarding complete job etc.icl primer |
| 15 | Providing and fixing with High rib colored profile sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters 0.50mm Thick |
| 16 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete.all complete job. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 17 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 18 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth incl water primer complete jon in all respect.2 2 mm thick |
| 19 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 20 | Providing and fixing glazed shutters for doors, windows and clerestory windowsincluding ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws KD |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type |
| 22 | Applying Priming coat with ready mixed colour primer of approved brand and manufacture on wood work. |
| 23 | Painting with synthetic enamel paint to give an even shade two or more coates of approved brand and manufacture on wood. and steel work |
| 24 | Providing and fixing of hardware items of ISI Marked of standard quality and make. Handles 150mm |
| 25 | Handles 100mm |
| 26 | Hooks 150mm |
| 27 | Concealed Locks 200mm |
| 28 | T Bolts 150mm |
| 29 | T Bolts 100mm |
| 30 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and hades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1(600x600) |
| 31 | Providing and fixing 10mm thick ply wood in room Ceiling Above and below ceiling ) including supporting structure 2''x2'' wooden joists and 50x50mm and 2'x2' mesh web incl wooden cornice at coners and where ever required , beadings nails all carriages and costs. |
| 32 | Providing and fixing of imported kD supporting joists in rooms Ceiling including all carriages and costs. |
| 33 | providing /F glass panes 3.5 mm thick ) in doors windows and clerestory window shutters incl cost of beading nails complete |
| 34 | Providing and fixing of 35mm thick wire guage shutters for windows and doors including cost of MS butt hinges and screws all complete job. KD |
| 35 | Carriage of materials by mechanical transport from source upto site of work including loading, unloading and stacking a. Stone aggregate for an average lead of 3 Km |
| 36 | b. Sand for an average lead of 20km |
| 37 | c) Brick for avg lead of 60km Please Enable Macros to View BoQ information |
