|
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER,CHENNAI Name of Work: SPECIAL REPAIRS TO CERTAIN PORTION OF BLDG NO P-293 (CADETS MESS) AT OTA CHENNAI UNDER GE STM CHENNAI Contract No: CWE/STM/ OF 2026-27 Name of the Bidder/ Bidding Firm / Company : SCHEDULE 'A'(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of items Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | PART - I (B/R PORTION) |
| 3 | S&F in repair S&F in repairs vitreous Chinaware squatting pan, ‘Orrisa pattern’ of size 580 mm x 440 mm, snow white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with and including provision of lime / plain cement concrete1:2:4 type B1 using 20 mm graded crushed stone aggregate as directed including making connections to trap and to flush pipe, etc and making good to floors complete all as specified. Make: Hindware / Parryware |
| 4 | S&F in repairs PVC, syphonic action type, flushing cistern, low level, white, of 10 litres capacity , with inlet ball valve, float, handle and flush pipe including necessary brackets and 32 mm dia flushpipe of suitable length complete all as specified. |
| 5 | S&F in repairs Bib taps 15mm bore cast copper alloy with crutch or butter fly handle chromium plated screwed down for iron pipe or for brass ferrule fixed. |
| 6 | S&F in repair stop valves15 mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed |
| 7 | S&F in repairs pillar taps 15mm, cast copper alloy with capstan heads, CP fancy type, screwed down high pressure with long screwed shanks and flynuts screwed for iron pipe and fixed. |
| 8 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long. |
| 9 | S&F in repair CP brass shower rose of 125mm size suitable for 15mm bore pipe complete all as specified. |
| 10 | S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600mm. |
| 11 | S&F in repairs bevelled edge mirror of size 450mm x 600 mm ,selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified. |
| 12 | S&F stainless steel peg set of 5 of pattern and model as approved by Engineer-in-Charge |
| 13 | S&F Vitreous China oval shaped wash basin counter type, white, of size 550mm x 400mm embedded on marble platforms including cutting for and pinning in ends of brackets or erecting stand brackets, including 32 mm waste coupling of PTMT (half or full threaded) (Minimum weight -45gms ) and waste pipe including taking down of old wash basin of any description complete all as specified. |
| 14 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 30cm long between flanges complete all as specified. |
| 15 | S&F in repairs vitreous china urinal, half stall type coloured complete fixied with suitable fixing arrangements as per Manufactuer's instruction to wall with and including CP urinal spreader, CP domed waste coupling and waste pipe complete all as specified and directed. |
| 16 | S&F in repairs vitreous china urinal partition of size 310mm x 770mm |
| 17 | S&F Anodised aluminium (minimum 50 micron) frame for doors, windows, ventilators and grills/guard bars etc with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 18 | S&F anodised aluminium door shutters with aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed |
| 19 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each including making good the disturbed surfaces of walls,floor etc complete all as specified and directed. |
| 20 | Taking down chowkats or frames with shutters (without taking off shutters from frames) not exceeding 1.5 Sqm each including making good the disturbed surfaces of walls,floor etc complete all as specified and directed. |
| 21 | S&F second class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified |
| 22 | S&F 35mm thick factory made second class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified |
| 23 | S&F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers , etc.; sizes of members of shutters all as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 24 | S&F 30 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers , etc.; sizes of members of shutters all as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 25 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S Square tube, suppling &fixing in opening as per spcification and drawing complete all as specified . Note:-(a) Existing wall edges to be finished properly in cement plaster 1:4 including providing and fixing 6 Nos of wooden plugs of size not exc 17Sqcm average sectional areas and 100mm long to fix the door frame (b) Frame shall be fixed to the wall by using 6 Nos of 100mm long MS screw, 3 each on either side on 6 Nos of wooden plug. (c) PCC strip of suitable size shall be fixed at bottom of each door for smooth opening . |
| 26 | S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & botom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles andplain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail and jointed together with solvent cement, supplying and fixing in frame at site as per specification and drawing |
| 27 | S&F stainless steel butt hinges of size 100 mm |
| 28 | S&F stainless steel butt hinges of size 75 mm |
| 29 | S&F Alumininum anodised barrel tower bolts of extruded section of 200 mm size |
| 30 | S&F Alumininum anodised barrel tower bolts of extruded section of 150 mm size |
| 31 | S&F Extruded aluminium alloy handles, fabricated type, anodised of 150 mm long |
| 32 | S&F Extruded aluminium alloy handles, fabricated type, anodised of 125 mm long |
| 33 | M&L for cutting holes in brick walls exceeding half brick but not exceding one brick thick wall built in cement mortar for inserting hold fast and making good the disturbed cutting portion in plain cement concrete 1:2:4 type B1 incuding formwork as required complete all as specified |
| 34 | S&F mild steel hold fast made from flat iron of size 25 mm x 3mm , 300mm long, hand made sliding bolts, clamps, hook and pintle hinges, large hasp and staples similar articles conforming to Fe 290 gde E 165 complete all as specified |
| 35 | M&L for preparing new/old steel and iron surface such as hold fasts of area not exceeding 0.10 Sqm each and treated with tar or coal tar black paint complete all as specified and directed . |
| 36 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 Gde E 165 including portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc. complete all as specified. |
| 37 | S&F 5.0mm thick figured glass, pin head type and glazing with oil putty in square ,exceeding 0.5Sqm in each pane and fixed to aluminum frames using rubber packing including hacking out old broken glass etc complete all as specified |
| 38 | S&F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane and fixed to aluminum frames using rubber packing complete all as specified. |
| 39 | S&F in repairs 4.0mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane and fixed to aluminum frames using rubber packing complete all as specified. |
| 40 | S&F 4.0mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane and fixed to aluminum frames using rubber packing conmplete all as specified. |
| 41 | S&F in repairs 4.0mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane and fixed to aluminum frames using rubber packing complete all as specified. |
| 42 | S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 43 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 44 | S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 45 | S&F in repairs mild steel rat tail rod pattern springs including roller and roller plate ordinary of size 300mm complete all as specified |
| 46 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy of 300mm size and fixed. |
| 47 | M&L for preparing new wooden surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 48 | M&L for preparing new steel surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer , complete all as specified and directed. |
| 49 | Taking down old existing pipe of any size, type and description complete all as directed |
| 50 | S&F PVC (SWR) pipes of 75mm bore ,single socketed, in any length with rubber ring joints or solvent cement, laid in floor complete all as specified |
| 51 | S&F PVC (SWR) pipes of 75mm bore, single socketed, in any length with rubber ring joints or solvent cement, fixed to wall with suitable clamps complete all as specified |
| 52 | S&F PVC (SWR) pipes of 110mm bore,single socketed, in any length with rubber ring joints or solvent cement, laid in floor complete all as specified |
| 53 | S&F PVC (SWR) pipes of 110mm bore, single socketed, in any length with rubber ring joints or solvent cement, fixed to wall with suitable clamps complete all as specified |
| 54 | S&F PVC (SWR) bend of 110 mm bore. |
| 55 | S&F PVC (SWR) floor trap with grating including jointing to waste pipe of 75mm dia with solvent cement |
| 56 | S&F PVC (SWR) Gully trap of size 125mm / 110mm setting and jointing with solvent cement. |
| 57 | S&F PVC (SWR) vent cowl of 110 mm bore |
| 58 | S&F PVC (SWR) junction single, (Single T) equal or unequal suitable for 110 mm bore pipe with access door |
| 59 | S&F PVC (SWR) junction single, (Single T) equal or unequal suitable for 75 mm bore pipe with access door |
| 60 | S&F PVC (SWR) bend of 75 mm bore. |
| 61 | S&F PTMT Grating doom of 100mm dia ( Minimum weight- 25gms) |
| 62 | S&F Stack clamp suitable for 110mm bore pipe made out of flat iron of 50mmx5mm size and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof including necessar painting the steel surface complete all as specified |
| 63 | M&L for Reinforced concrete pipes of 200mm dia , class NP2, laid and jointed with collars complete all as specified. |
| 64 | M&L for Reinforced concrete pipes of 300mm dia , class NP2, laid and jointed with collars complete all as specified. |
| 65 | M&L for concrete bed to drain pipes of 200mm bore in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate including parking under and haunching against the sides of pipe after they are laid and tested complete all as specified |
| 66 | M&L for concrete bed to drain pipes of 300mm bore in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate including parking under and haunching against the sides of pipe after they are laid and tested complete all as specified |
| 67 | Demolition of brick work built in cement mortar including all precast concrete articles, all quions ,arches , pillars etc complete all as specified . |
| 68 | M&L for old size brick work with fly ash bricks straight or curved on plan and 6 metre mean radius built in cement mortar 1:4 complete all as specified |
| 69 | M&L for rendering 15mm thick in cement mortar 1:4 on fair surfaces of brick work or concrete surfaces finished even and smooth without using extra cement |
| 70 | Demolition of cement concrete (unreinforced) of any description in ground floors and pavings not exceeding 15cm thickness below or above ground level complete all as specified. |
| 71 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 72 | Dismantling of floor, hearth or wall tiling including cement mortor bedding (but not backing) and removig serviceable tiles to store and rubbish off the premises. |
| 73 | M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate , 25 mm thick as in bedding layer to tiling complete all as specified |
| 74 | M&L for non -skid coloured ceramic joint free tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile , over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified. |
| 75 | M&L for non -skid coloured ceramic joint free tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile , over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified. |
| 76 | M&L for glazed coloured ceramic joint free tiles of size 350mmx250mmx7mm thick / 450mmx350mmx7mm thick on vertical surfaces such as skirting, dados and risers to step etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile , over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified. |
| 77 | M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span over half brick partition wall including necessary form work as required complete all as specified and directed .Note: Reinforcement shall be measured and paid separately under relevant item. |
| 78 | M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof slabs supported on walls, beams and columns complete all as specified and directed .Note: Reinforcement shall be measured and paid separately under relevant item. |
| 79 | M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, shelvings and similar work not exceeding 200mm thick , fair finished flat surface of concrete complete all as specified |
| 80 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed in CM 1:4 complete all as specified. |
| 81 | M&L for precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggrgate as in drain cover slabs of 75mm thick including necessary forms,moulds etc fixed in cement 1;4 complete all as specified and directed. |
| 82 | M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified |
| 83 | M&L for Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified |
| 84 | M&L for Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified |
| 85 | Taking up or down steel / iron tube of 20 mm bore and connections including cleaning for refixing or removal to store complete all as specified. |
| 86 | S&F CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings laid on walls/floors etc with suitable clamps complete all as specified. |
| 87 | M&L for cutting chases in brick wall exceeding 10cm but not exceeding 20cm in girth for inserting cuddapah stone shelving and similar work and making good to facings where required in cement mortar 1:3 complete all as specified and directed. |
| 88 | Taking up or down steel / iron tube of 25 mm bore and connections including cleaning for refixing or removal to store complete all as specified. |
| 89 | S&F CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings laid on walls/floors etc with suitable clamps complete all as specified. |
| 90 | Taking up or down steel / iron tube of 50 mm bore and connections including cleaning for refixing or removal to store complete all as specified. |
| 91 | S&F CPVC pipes 50mm dia SDR 11 & Plain CPVC SDR 11 fittings laid on walls/floors etc with suitable clamps complete all as specified. |
| 92 | S&F in repairs Rotational moulded polyethylene water storage tanks 2000 litres capacity ,three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed. |
| 93 | S&F in repairs Rotational moulded polyethylene water storage tanks 1000 litres capacity ,three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed. |
| 94 | S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe of 25mm dia and fixed (Minimum weight -455gms ) |
| 95 | S&F in repairs Gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe of 25mm dia . |
| 96 | S&F in repairs Gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe of 50mm dia . |
| 97 | Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified |
| 98 | M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement on internal wall surfaces complete all as specified. |
| 99 | M&L for rendering 10mm thick in cement mortar 1: 6 as under layer and 5mm thick in cement mortar 1:4 mixed with water proofing compound as finishing layer to external wall surfaces ,finished even and smooth complete all as specified . |
| 100 | M&L for rendering 10mm thick in cement mortar 1:3 on concrete roof ceiling surface,finished even and smooth without using extra cement complete all as specified. |
| 101 | Supply only integral water proofing compound. |
| 102 | M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer over a coat of 3mm thick wall care putty to internal wall surfaces complete all as specified and directed. |
| 103 | M&L for preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer over a coat of 3mm thick wall care putty to internal wall surfaces complete all as specified and directed. |
| 104 | M&L for preparation of old decorated ceiling surfaces and applying one coat of white wash including anf filling the crack / depressions etc by using chalk whitening wherever required complete all as specified |
| 105 | M&L for preparing new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed. |
| 106 | M&L for complete removal of existing treatment on walls and applying two coats of exterior weather proof paint over a coat of weather proof primer complete all as specified and directed. |
| 107 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons any thickness, jointed in cement mortar of any description complete all as specified and directed. |
| 108 | M&L for Marble Makrana white 20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing complete all as specified and directed. |
| 109 | M&L for Machine cut kota stone slab flooring 20mm to 25mm thick over and including 15mm thick cement screed bed in cement mortar 1:6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified . |
| 110 | M&L for Machine cut kota stone slab as in riser of steps, skirting, dado and pillar laid over and including 10mm thick in backing coat in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified |
| 111 | M&L for Grinding and polishing the existing rough surface of marble/Granite floor / wall and make the surface smooth including filling with white cement mixed with pigment before grinding, polishing and finally applying beewax polishing complete all as specified and directed. |
| 112 | M&L for rounding to edges of granite /stone slabs edge as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 113 | Taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening complete all as specified |
| 114 | Taking down shutter of any description not exceeding 1 sqm each and refixing in the same opening complete all as specified |
| 115 | M&L for 60 mm thick machine pressed rubber moulded precast concrete interlocking paver block, factory manufactured (ISI Marked) of any shape and size as approved by GE ,conforming to IS 15658-2006 of M-35 Grade,casted with grey cement and top layer with grey cement & without pigment as in floor,pavement,etc complete all as specified and directed. |
| 116 | M&L for stone dust filling under floor ,pavers block as a cushioning including watering and consolidation complete all as specified and directed. |
| 117 | M&L for Chequered cement concrete coloured machine pressed tiles of size 250mm x 250mm x 22mm thick with grey cement, set jointed & pointed in neat cement slurry and pointed with coloured cement to match with colour of tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 118 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth , not exceeding 10 sqm on plan for foundation ,for shafts, wells, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and as directed. |
| 119 | Returning, filling in in any type of soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed. |
| 120 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 121 | S&F Special fittings brass elbow to CPVC Pipes SDR 11, 20mm dia |
| 122 | S&F Special fittings Brass 'T' to CPVC Pipes SDR 11, 20mm dia |
| 123 | S&F Special fittings male brass threaded adaptor to CPVC Pipes SDR 11, 20mm dia |
| 124 | S&F Special fittings female brass threaded adaptor to CPVC Pipes SDR 11, 20mm dia |
| 125 | S&F Special fittings brass elbow to CPVC Pipes SDR 11, 25mm dia |
| 126 | S&F Special fittings brass 'T' to CPVC Pipes SDR 11, 25mm dia |
| 127 | S&F Special fittings male brass threaded adaptor to CPVC Pipes SDR 11, 25mm dia |
| 128 | S&F Special fittings female brass threaded adaptor to CPVC Pipes SDR 11, 25mm dia |
| 129 | S&F Special fittings Tank adaptor to CPVC Pipes SDR 11, 25mm dia |
| 130 | S&F Special fittings Union to CPVC Pipes SDR 11, 25mm dia |
| 131 | M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate , 50 mm thick as in plinth protection ,finished the surface even and smooth without using extra cement complete all as specified . |
| 132 | M&L for Stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified . |
| 133 | PART - II (INTERNAL ELECTRIC SUPPLY) |
| 134 | Taking down carefully copper point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit all as directed. |
| 135 | M&L for Point wiring complete with 1.5 sqmm FRLS single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-matallic rigid PVC conduit PVC conduit fittings and conduit asccessorries concealed in walls, roofs and floors etc., including Modular flush boxes and Modular cover plates for switches concealed in walls, roof and socket / electronics fan regulator / telphone socket, including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continmuity conductor and connecting to common earth dolly all as specified for one light/fan point controlled by one way switch complete including cutting chases, pinning in, not exceeding 10 Cm girth and making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring complete all as specified and as directed. |
| 136 | One light point controlled by one switch. |
| 137 | One Ceiling fan point controlled by one switch and one regulator. |
| 138 | One 3 pin 5 amps switch socket on independent board. |
| 139 | One 3 pin 5 amps switch socket on same board along with other switches. |
| 140 | One exhaust point controlled by one switch |
| 141 | All as per item No.132 above but with 4 sqmm FRLSH copper conductor cable with 4 sqmm PVC copper conductor FRLSH cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one switch 15/16 Amps on independent board complete all as specified and as directed. |
| 142 | S&F MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 250 Amps rated busbar with neutral link,415 Volts 12 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including taking down Old DBs all as specified and directed. |
| 143 | S&F MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 160 Amps rated busbar with neutral link,415 Volts 8 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection completeincluding taking down Old DBs all as specified and directed. |
| 144 | S&F MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 160 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection completeincluding taking down Old DBs all as specified and directed. |
| 145 | S&F MCCB 4 Pole , 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA adjustable thermal & fixed magnetic setting complete all as specified and directed. |
| 146 | S&F MCCB 4 Pole , 415 V, Adjustable type, 125 Amps with breaking capacity 16 KA adjustable thermal & fixed magnetic setting complete all as specified and directed. |
| 147 | S&F MCCB 3 Pole , 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA adjustable thermal & fixed magnetic setting complete all as specified and directed. |
| 148 | S&F MCB TP 25 Amps 415V 10KA 'C' curve in the DB complete with connection testing and commissioning including taking down old MCB complete all as directed. |
| 149 | S&F MCB TP 32 Amps 415V 10KA 'C' curve in the DB complete with connection testing and commissioning including taking down old MCB complete all as directed. |
| 150 | S&F MCB TP 63 Amps 415V 10KA 'C' curve in the DB complete with connection testing and commissioning including taking down old MCB complete all as directed. |
| 151 | S&F MCB distribution board , vertical 415 volts tripple pole and neutral ,double door, sheet steel enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 152 | S&F MCB distribution board , 240 volts single pole and neutral ,double door, sheet steel enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 153 | S&F MCB distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 04 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 154 | S&F MCB TPN 25 Amps 415V 10KA 'C' curve in the DB complete with connection testing and commissioning including taking down old MCB complete all as directed. |
| 155 | S&F MCB TPN 32 Amps 415V 10KA 'C' curve in the DB complete with connection testing and commissioning including taking down old MCB complete all as directed. |
| 156 | S&F TPN 63 Amps 415V 10KA 'C' curve in the DB complete with connection testing and commissioning including taking down old MCB complete all as directed. |
| 157 | S&F MCB SPN 32 Amps rating 240V, 10KA 'C' in the DB complete with connection testing and commissioning including taking down old MCB complete all as directed. |
| 158 | S&F MCB SP 5 to 32 Amps 240V, 10KA 'C' curve in the DB complete with connection testing and commissioning including taking down old MCB complete all as directed. |
| 159 | S&F Triple pole and earth encolsure with three pin and earth plug with socket, 415V, 32 Amps complete with one triple pole MCB 32 Amps capacity complete all specified and directed. |
| 160 | S&F Triple pole and earth encolsure with three pin and earth plug with socket, 415V, 63 Amps complete with one triple pole MCB 63 Amps capacity complete all specified and directed. |
| 161 | S&F in repairs metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 240 Volts 20 Amps all as specified and as directed. |
| 162 | M&L for sub main wiring with PVC insulated, 1100 volts grade single core FRLS multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping including accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old submain wiring of any description complete all as specified and directed. |
| 163 | S&F Ceiling rose surface bakelite 65mm x 50 mm two to three terminals |
| 164 | S&F Modular switch 1 way 6A, 1 module, 240 Volts |
| 165 | S&F Modular switch 1 way 16A, 1 module, 240 Volts |
| 166 | S&F Modular Socket, 6A - 2/3 pin combined 2 module |
| 167 | S&F Modular socket 6 A/ 16 A - 2/3 pin combined 2 module |
| 168 | S&F Modular Fan step regulator, 100W - 2 module for ceiling Fan of 1200 mm sweep |
| 169 | S&F LED lights fitting 1x 40W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. |
| 170 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified. |
| 171 | S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. |
| 172 | Taking down ceiling /exhaust fan by sealing cable end, dismantling blades and removing fan and blades to MES store or reuse at site as directed by Engineer-in-Charge. |
| 173 | S&F brushless direct current motor (BLDC) ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep ,minimum air delivery 210 CFM with service value 6.00 BEE , Five star rated complete all as specified and directed. |
| 174 | S&F Exhaust fan, steel body AC single Phase. 230V of size 450mm sweep heavy duty, blades, and frame and louvers complete all as specified and as directed. |
| 175 | S&F Exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed. |
| 176 | Supply and lay PVC insulated and PVC round sheathed, multicore annealed bare Copper Conductor (flexible) industrial , electric power cables (heavy duty) 1100 volts grade confirming to IS 694:2010 in and including suitable PVC conduit/duct of following sizes all as specified and as directed. |
| 177 | 4 core 16 Sqmm |
| 178 | 4 core 10 Sqmm |
| 179 | M&L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
