|
| 1 | INTERIOR WORKS |
| 2 | Labour towards dismantling of existing aluminium partition & door, wall paneling, window blinds, air-conditioners, light fittings, ceiling fans, switch boards, etc., sorting and stacking serviceable materials at site and removing rubbish from site complete as directed. |
| 3 | Supplying, fitting and fixing panelling on wall. Framing shall consist of heavy duty aluminium box sections 50mm x 25 mm @ 600mm c/c both ways horizontally and vertically on the wall including all accessories as per direction of Engineer-in-Charge. |
| 4 | Supplying, fitting and fixing decorative lamination conforming to IS:2046:1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF/Ply boards with recommended/approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in-Charge. The rate includes the cost of labour, adhesive and all incidental charges thereof. Thickness of laminate 1 mm. |
| 5 | Supplying, fitting and fixing boiling water proof ply conforming to IS:710- 1977 bonded with phenol formaldehyde synthetic resin conforming to IS:848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] - 12mm ply |
| 6 | Providing and fixing M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-Charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete.) |
| 7 | Providing and fixing thermal insulation with Resin Bonded Rock wool conforming to IS:8183, having density 48kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss-crossing GI wire OR filled in dry partition framework etc. complete as per directions of Engineer-in- Charge. |
| 8 | Supplying, fitting and fixing solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65 mm wide each and the entire frame fitted with 37.5 mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position, all complete as per direction of Engineer-in-Charge. 35mm thick shutters (single leaf). |
| 9 | Supplying, fitting and fixing decorative lamination conforming to IS:2046:1995 as per approved make, brand, finish and thickness with fitting, fixing the same on flushdoorfaceswithrecommended/approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in-Charge. The rate includes the cost of labour, adhesive and all incidental charges thereof. Thickness of laminate 1 mm. |
| 10 | Providing and fixing door hardware/fittings from decorative range of approved make Godrej/Ozone/Dorset for solid core flush door consisting of 1 no. medium duty hydraulic door closure, single lever mortise lock with pair of handles in SS matt finish, 1 no. of door stopper in SS matt finish and 4 nos. of hinges (4\\") in SS 304 grade, all complete. |
| 11 | Providing and fixing Carpet Tile of approved shape and size, 100% PP with PVC backing of pile height 3mm & total height 6mm in multi-level loop construction, fixed with adhesive as per manufacturer's specification. |
| 12 | Providing and fixing of Aluminium alloy Skirting of 75mm height, fixed on wall/partition as per manufacturer's specification, including allaccessories. |
| 13 | Rendering the surface of walls and ceiling with white cement based wallputty of approved make and brand (1.5mm thick), complete to the entire satisfaction of Engineer-in-Charge. |
| 14 | Providing and applying water based interior grade Acrylic Primer of approved quality and brand, 2 coats on plastered or concrete surface old or new surface to receive acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of Engineer-in-Charge. |
| 15 | Providing and applying Acrylic Emulsion Paint of approved make and brand, 2 coats on walls and ceiling including sand papering in intermediate coats including putty to the entire satisfaction of Engineer-in-Charge. |
| 16 | Providing and fixing storage cabinet, structures made with 19 mm thick BWR grade solid plywood conforming to IS:303. Back surfaces fixed to the wall/partition to be made with 6 mm thick BWR grade plywood. Shutters and intermediate shelves to be made with 19 mm thick BWR grade solid plywood conforming to IS:303. All inside surfaces to be finished with 0.7 mm thick balancer laminate and exposed outside surfaces to be finished with 1 mm thick decorative laminate conforming to IS: 2046 : 1995 as per approved make, brand, finish on plywood with recommended / approved adhesive. Plywood edges to be finished with 2 mm thick PVC edge banding matching the lamination shade. The rate includes the cost of SS hinges, handles, locks accessories and adhesives, all complete as per design and direction of Engineer-in-Charge. Depth of storage - 600 mm. (For measurement purpose the face area : length x height is to be considered) |
| 17 | Sanitary Plumbing Works |
| 18 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (blocks and C.I. brackets including two coats of painting of C.I. brackets (iii) 630 mm X 450 mm size |
| 19 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. (b) With 'S' trap (with vent) |
| 20 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (iv) Bestolite (solid type) white |
| 21 | Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings. |
| 22 | Supplying, fitting and fixing pillar cock of approved make e) (ii) CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand). |
| 23 | Supplying, fitting and fixing towel rail with two brackets (a) C.P. over brass (ii) 25 mm dia. and 600 mm long |
| 24 | Supplying, fitting and fixing liquid soap container (a) Cromium plated. |
| 25 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 26 | Supply, Installation & Placement of Conference Room Revolving Mid Chair: Posture Perfect Mid Back ChairThe manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification. |
| 27 | ELECTRICAL WORKS |
| 28 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single corestranded 'FR' PVC insulated & unsheathed copper wire(Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make), with 1x22/0.3 (1.5 sqmm) single corestranded 'FR' PVC insulated & unsheathed copper wire forECC, to light/fan/call bell points with Modular type switch(Brand approved by EIC) fixed on Modular GI switch boardwith top cover plate and 2 no. suitable size “Ph & N” copperbar & earthing attachment fixed on wall incl. mending gooddamages to original finish.[ PWD-E I,1] |
| 29 | Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (Brandapproved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required.(P-E-14,It-E1a) |
| 30 | i) 2 X 1.5 sqmm & 1 X 1.5 sqmm |
| 31 | ii) 2 X 2.5 sqmm & 1 X 1.5 sqmm |
| 32 | iii) 2 X 4 sqmm & 1 X 4 sqmm |
| 33 | Supplying & Fixing GI Module 2 Modular Switch Board of thefollowingsizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl.making earthing attachment,painting and mending good damages to building works |
| 34 | Supply & Fixing 240V,10A,2(Two) way Modular typeswitch (approvedmake) on existing GI Modular switchboard having top cover plate andmaking necessaryconnections as required |
| 35 | Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 36 | Supply & Fixing 240 V 6 A Modular type switch (Brandapproved by EIC) on existing GI Modular type switchboard having top cover plate and making necessaryconnections as required[ PWD-E17,F,3A] |
| 37 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 38 | Supply & Delivery of 12 W, 4K LED Downlight of 120/140 mm dia ( Make :- Havells, Model No - ZIVAFLRDDLR12WLED857S or equivalent of Philips/K-Lite) |
| 39 | Supply & Delivery of c with all necessary arrangement ( Make : Havells, Model :- Flex. Neo LED Strip 24 W RGB 5 M/ LEDVANCE (LMSV 400/4K) Please Enable Macros to View BoQ information |
