|
| 1 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc, complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge.Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect. |
| 2 | Taking down Cement plaster or cement lime plaster on brick or stone walls including raking out joints, hacking for key & scrubbing down with water etc complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge.Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect. |
| 3 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge.Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect. |
| 4 | Repairing the edges of concrete chajjas, facias, slabs, columns & the like by providing PCC (1:2:4) type B-0 including all necessary form work and rendering 15 mm thick (average thickness) in cement mortar (1:3), after applying a coat of cement slurry @ 3 kg/ Sq. m of surface, finished even and fair, surface area not exceeding 300 mm wide, in patches including taking down swoolen/damaged plaster or concrete (up to 6th storey of Building) complete all as specified. |
| 5 | Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of weather proof acrylic emulsion paint to match with existing surfaces complete (up to 6th storey of Building) all as specified and directed. |
| 6 | Rendering 15 mm thick in cement mortar 1:6, on fair faces of brick or concrete surfaces , trowelled to even and smooth surface without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Rendering 15 mm thick in cement mortar 1:4 over of brick or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Rendering 10 mm thick in cement mortar 1:3, on fair face of concrete surfaces ceiling etc.at any height (upto 6th floor) and removing rubbish out of premise land all as specified and directed. |
| 9 | Preparation of old decorated brick/concrete/ plastered or unplastered surfaces of walls by brooming or by steel wire brushing, scrapping down snow soot, moulds, moss and efflorescent salts and treading oil and greasy spots, of walls including corinces pillars etc filling the all holes / patches with wall care putty to make surface smooth wherever required and applying one coat of interior acrylic emulsion at any height (upto 6th floor) , all as specified and directed. |
| 10 | Preparation of old decorated brick/concrete/ plastered or unplastered surfaces of ceilings by brooming or by steel wire brushing, scrapping down snow soot, moulds, moss and efflorescent salts and treading oil and greasy spots, of ceiling including corinces pillars etc filling the all holes / patches with wall care putty to make surface smooth wherever required and applying one coat of interior acrylic emulsion at any height (upto 6th floor) , all as specified and directed. |
| 11 | Preparation of old decorated brick/concrete/ plastered or unplastered surfaces of walls by brooming or by steel wire brushing, scrapping down snow soot, moulds, moss and efflorescent salts and treading oil and greasy spots, of walls including corinces pillars etc filling the all holes / patches with wall care putty to make surface smooth wherever required and applying two coat of white wash at any height all as specified and directed. |
| 12 | Preparation of old decorated brick/concrete/ plastered or unplastered surfaces of ceiling by brooming or by steel wire brushing, scrapping down snow soot, moulds, moss and efflorescent salts and treading oil and greasy spots, of walls including corinces pillars etc filling the all holes / patches with wall care putty to make surface smooth wherever required and applying one coat of white wash at any height all as specified and directed. |
| 13 | Complete removal of existing treatment on old decorated brick/concrete/ plastered or unplastered surfaces and providing 1 mm thick wall care putty on old plastered surface to wall/ ceiling to make surface smooth at any height (upto 6th floor) complete all as specified and directed. |
| 14 | Complete removal of existing treament on old decorated brick/concrete/ plastered or unplastered surfaces and providing 1 mm thick wall care water based cement base putty on old plastered surface to wall/ ceiling to make surface smooth at any height (upto 6th floor) complete all as specified and directed. |
| 15 | Preparation of old decorated brick/concrete/ plastered or unplastered surfaces of walls by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, of walls including corinces pillars etc filling the all holes / patches with wall care putty to make surface smooth wherever required and applying two coats of interior acrylic emulsion at any height (upto 6th floor), all as specified and directed. |
| 16 | Preparation of old decorated brick/concrete/ plastered or unplastered surfaces of ceiling by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, of walls including corinces pillars etc filling the all holes / patches with wall care putty to make surface smooth wherever required and applying two coats of interior acrylic emulsion at any height (upto 6th floor), all as specified and directed. |
| 17 | Preparation of old painted of wall surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots and applied one coat of interior acrylic plastic emulsion paint over of any description over 10cm girth or width, not otherwise described complete all as specified and directed. |
| 18 | Preparation of new surfaces brick/concrete plastered surfaces of ceiling and applied two coats of interior acrylic plastic emulsion paint over 1 mm thick putty at any height complete all as specified and directed. |
| 19 | Preparation of old painted of wall surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots and applied two coats of interior acrylic plastic emulsion paint over of any description over 10cm girth or width, not otherwise described at any height (upto 6th floor) complete all as specified and directed. |
| 20 | Preparation of old painted concrete surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, and applied one coat of synthetic enamel paint of White and black (Use for kerb stone) over a coat cement base putty any description over 10cm girth or width, not otherwise described complete all as specified and directed. |
| 21 | Preparing old plastered or unplastered surfaces of wall by washing rubbing down and stopping of painted surfaces of any description filling the all holes / patches with wall care putty to make surface smooth wherever required and applying one coat of weather guard exterior acrylic emulsion paint (Ist quality) (Apex) any tint at any height (Upto 6th floor) complete all as specified and directed. |
| 22 | Complete removal of existing treatment including washing, rubbing down and stopping of painted surfaces and applying 1-2 mm thick Metallic Texture painting (Top quality) on walls in any colour/shade/ pattern/design including preparatory work for base by applying primer/putty coat by any authorised applicator complete all as specified and as directed. |
| 23 | (a) Complete removal of existing surface and treatment by scrapping and sanding with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.(b) Material and labour for 1 mm thick putty complete surface over the prepared wall surface @ 1kg per sqm by mixing the putty powder by adding water as per manufacturer instructions and mixing it in putty mixer with a capacity of mixing 40 kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty(c) Appliying one coat of waterproofing primer/ damp-proof primer @ 1 Itr per 50 sqft. diluted with 30 % by water to be applied using roller.(d) Allow 4-6 hrs to dry the surface for painting of subsequent coats.(e) Material and labour for two coats of interior premium acrylic emulsion of approved colour using roller and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to hard-to-reach areas and penetration of acrylic emulsion on the surface at any height (upto 6th floor) complete all as specified and directed. |
| 24 | (a) Complete removal of existing treatment by scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust by skilled labour.(b) Material and labour for 1 mm thick putty complete surface over the prepared wall surface @ 1kg per sqm by mixing the putty powder by adding water as per manufacturer instructions and mixing it in putty mixer with a capacity of mixing 40 kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty(c) Appliying one coat of waterproofing primer/ damp-proof primer @ 1 Itr per 50 sqft. diluted with 30 % by water to be applied using roller.(d) Allow 4-6 hrs to dry the surface for painting of subsequent coats.(e) Material and labour for applying two coats of interior acrylic emulsion paint using roller and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to hard-to-reach area and penetration of acrylic emulsion on the surface at any height (Upto 6th floor) complete all as specified and directed. |
| 25 | (a) Complete removal of existing treatment by scrapping and sanding with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.(b) Material and labour for touch up water base cement base Putty application wherever required over the prepared wall surface @ 1kg per sqm by mixing the putty powder by adding water as per manufacturer instructions and mixing it in putty mixer with a capacity of mixing 40 kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty(c) Material and labour for one coat of waterproofing/ damp proof primer @ 1 ltr per 50 sqft. diluted with 30% by water to be applied using an airless spray machine of with a flow rate of 2 ltr per minute having a pressure of 3300 PSI(d) Allow 4-6 hrs to dry the surface for painting of subsequent coats.(e) Material and labour for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additives, with heat Reflectant property which can reduce the painted surface temp. by 5 degree and gives excellent protection against UV attack with VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1L / 50 sqft. diluted with water as per manufacturer instructions applied over priming coat with airless spray machine/ roller of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. |
| 26 | Note for item no 22 to 24 : The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :-(a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Emulsion paint etc after approval by the GE. (b) The Contractor shall submit \\"Memoradum of Understanding\\" (MOU) with at least one of the manufacturers mentioned in the contract after acceptance of contract, failing which the work order will not be placed.(c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures.(d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.(f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge.(h) Sample patch of 10 Sqm shall be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. (j) Guarantee :- The contractor shall furnish a guarantee certificate from approved make in favour of Garrison Engineer for the efficieny of the exterior emulsion paint for 5 years and interior emulsion paint for 3 years during the guarantee period. |
| 27 | Preparation of old wooden surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint at any height (upto 6th floor), complete all as specified. |
| 28 | Preparation of old steel and iron surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint at any height (upto 6th floor), complete all as specified. |
| 29 | Material and labour for preparation of any type of old floor surfaces and applying one coat of weather guard exterior acrylic emulsion paint (Ist quality) complete all as specified and directed. |
| 30 | Granite black shade, 18-20 mm thick, (table rubbed and polished) in single piece (in one direction) machine cut, machine polished, bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick (average thickness) cement mortar (1:4) screed, as in jamb, gate pillar, cooking platform, shelves, RCC counters, window cills & similar situations, complete all as specified and directed by Engineer-in-Charge. |
| 31 | Sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips using Silicon for fixing of glass in addition to glazing putty, in squares not exceeding 0.5 Sq. mtr in each pane, complete all as specified and directed by Engineer-in-Charge. |
| 32 | Preparation of new surface brick/concrete plastered of ceiling and applying two coats of interior acrylic emulsion paint over and including 1 mm thick putty at any height complete all as specified and directed. Please Enable Macros to View BoQ information |
