|
| 1 | Dismantling floor hearth/ stone slabs/mosaic tile flooring or wall tiling including cement mortar bedding (but not backing) or plastering and removing servicebale tiles to stores and rubbish off the same out side the MD land complete all as specified and as directed. |
| 2 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed of 15mm thick in CM 1:6 etc complete all as specified and directed. |
| 3 | S&F coloured glazed ceramic tile in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat complete all as specified and as directed. |
| 4 | M&L 18-20 mm thick Granite black colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4),10mm thick incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed. |
| 5 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or sub floors finishing the surfaces even and rough to receive the topping layer complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 Sqm etc complete all as specified and directed. |
| 8 | Taking down steel windows glazed with guard bars exc 0.50 Sqm and n.exc 1.0 Sqm each and including all fittings and fixtures and removed to from site and disposed off outside MD land after measurement,entry in MB as sch of credit material and signature by both parties complete all as specified and directed |
| 9 | Taking down steel windows glazed with guard bars exc 1.00 Sqm and n.exc 1.50 Sqm each and including all fittings and fixtures and removed to from site and disposed off outside MD land after measurement,entry in MB as sch of credit material and signature by both parties complete all as specified and directed |
| 10 | S&F for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165etc. complete, as specified. |
| 11 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length incl all necessary fittings complete as per direction of Engineer-in-Charge. complete all as specifed. |
| 12 | All as per item No. 11 above but of Frame size 65x 125 mm |
| 13 | S&F Factory Made Solid PVC Moulded Door Shutter,with particle board 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core. |
| 14 | S&F 30 mm thick factory made Flush shutters, solid core construction, with particle board core and plywood face panels,complete all as specified. |
| 15 | S&F 30 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered complete all as specified. |
| 16 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard 2/3 track sliding/rectangular/square section of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified. |
| 17 | S&F powder coated Anodised aluminium sliding window shutter type without sash bars, aluminium sections weighing 0.55 kg/m including powder coating of any colour ,thickness not lessthan 50 microns necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary locking arrangement and roller complete all as specified |
| 18 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 19 | S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane |
| 20 | S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified. |
| 21 | S&F cold rolled mild steel butt hinges medium weight of size 100mm fixed complete all as specified and as directed. |
| 22 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified. |
| 23 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified. |
| 24 | S&F 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified. |
| 25 | S&F 150 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified. |
| 26 | S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified |
| 27 | S&F mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified. |
| 28 | S&F in repair 25mm dia stainless steel curtain rod including 2 Pair of fancy type brackets/corners with each piece of curtain rod ,fixed with 45cm long mild steel screws complete all as specified |
| 29 | Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified. |
| 30 | S & F of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified. |
| 31 | S & F of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified. |
| 32 | S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed. |
| 33 | S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed. |
| 34 | S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed. |
| 35 | S&F of 15 mm CP extension nipple complete all as specified and as directed. |
| 36 | S&F in repairs 100mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement with dismatnling of old nahani trap with necessary PCC/ cement work complete all as specified and as directed. |
| 37 | S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed. |
| 38 | S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed. |
| 39 | S&F PVC bends any radius 75mm dia with access door complete all as specified and as directed. |
| 40 | S&F PVC bends any radius 110mm dia with access door complete all as specified and as directed. |
| 41 | S&F PVC Single T any radius 110 mm dia with access door complete all as specified and as directed. |
| 42 | S&F PVC (SWR) branch piece, double (double Y) equal or unequal any radius 110 mm dia with access door complete all as specified and as directed. |
| 43 | S&F PVC (SWR) branch piece, double (double Y) equal or unequal any radius 75 mm dia with access door complete all as specified and as directed. |
| 44 | S&F PVC (SWR) 75 mm vent cowl complete all as specified and as directed. |
| 45 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed. |
| 46 | S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed. |
| 47 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bendetc. complete all as specified and directed |
| 48 | S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for cold water complete all as specified. |
| 49 | S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 50 | S&F in repairs 2 way bib cock double handle with flange and all necessary fittings all as specified and directed. |
| 51 | S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 52 | S&F in repair 15 mm bore diameter brass CP wall mixer mixing hot & cold water complete all as specified and as directed. |
| 53 | S&F in repairs 15mm dia quarter turn swan neck pillar tap for WHB brass fancy type, chromium plated complete all as specified |
| 54 | S&F in repairs 15 mm nominal bore stop valves/angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed . |
| 55 | S&F in repairs over head shower chromium plated 95 mm dia with 3 flow with SS over head shower arm of 180mm with flange complete all as specified and directed. |
| 56 | S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed. |
| 57 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 58 | S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 750mm x 200mm width of trade pattern complete all as specified. |
| 59 | S&F in repair 32 mm dia PVC collapsible waste pipe for WHB/Kitchen sink complete all as specified. |
| 60 | S & F in repairs looking mirror of 5 mm thick 500mmx700mm with double coat for protection and longevity grounded edges for safety and silver plating on the back for better refelection and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 61 | S&F in repairs Glass corner shelf including CP railing, radius 300 mm complete all as specified and directed by the Engr-in-Charge, fixed in repairs. |
| 62 | S&F in repairs SS soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 63 | S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified. |
| 64 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified |
| 65 | S&F in repairs CPVC tank union 20mm internal dia complete all as specified and as directed |
| 66 | S&F Tank adapter 20 mm internal dia complete all as specified and as directed |
| 67 | S&F in repairs, 20 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density PVC Plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete, all as specified. |
| 68 | S&F in repairs, 25 mm internal bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed®omplete, all as specified. |
| 69 | Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 70 | M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 after demolition of old existing damaged .brick work complete all as specified and as directed |
| 71 | Taking down plastering incl raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and as directed. |
| 72 | M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and fair complete all as specified and as directed. |
| 73 | M&L rendering 15mm thick in CM (1 :4) with liquid WPC as per manufacturers instruction on fair faces of brick work or concrete surfaces finshed even and fair complete all as specified and as directed.( WPC will be paid separately) |
| 74 | M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cement including scrubbing down with water etc and removing rubbish of the premisesall as specified and as directed. |
| 75 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 76 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
