|
| 1 | Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead |
| 2 | Dismantlling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the materials for re-use and removing the debries within 50mtr lead. (Data for 9.30M2) |
| 3 | Dismentaling and removing of R.C.C Columns, Beams, Slab, Staircase landing and stacking the useful materials. |
| 4 | Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. |
| 5 | Filling in foundatin and plinth with sand watered and rammed etc including all cost conveyance roalty ,labour and T&P etc. complete as directed by the Engineer - in Charge |
| 6 | Cement concrete (1:3:6)with 4cm size hard granite metal per 1cum |
| 7 | Cement concrete (1:2:4)with 12mm size hard broken granite chips per 1cum |
| 8 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete |
| 9 | R.C.C M-20 works including centering & shuttering (R.C.C. foundation, plinth band and footings bases of columns mass concrete pre-cast slabs etc details for 10 Sqm) |
| 10 | R.C.C M-20 works including centering & shuttering (Plinth bend) |
| 11 | R.C.C M-20 works including centering & shuttering (R.C.C.beams,column,grider and bressmer, etc. ) Ground Floor |
| 12 | R.C.C M-20 works including centering & shuttering (R.C.C.beams,column,grider and bressmer, etc. ) 1st Floor |
| 13 | R.C.C M-20 works including centering & shuttering (R.C.C. Lintels )Ground Floor |
| 14 | R.C.C M-20 works including centering & shuttering (R.C.C. Lintels )1st Floor |
| 15 | R.C.C M-20 works including centering & shuttering (R.C.C. Chajja ) |
| 16 | R.C.C M-20 works including centering & shuttering (R.C.C. stairs excluding landing but including railing details for 5 Sqm ) |
| 17 | R.C.C M-20 works including centering & shuttering (RCC floor & roof slabs, landings, balconies, projecting, sun shade, R.B work, slab for culverts/drains & bridges )-Ground Floor |
| 18 | R.C.C M-20 works including centering & shuttering (RCC floor & roof slabs, landings, balconies, projecting, sun shade, R.B work, slab for culverts/drains & bridges )-1st Floor |
| 19 | Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.-Ground Floor |
| 20 | Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.-1st Floor |
| 21 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work per 1 sqm. |
| 22 | Brick work with Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in foundation and plinth per cum.-Ground Floor |
| 23 | Brick work with Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in foundation and plinth per cum.-1st Floor |
| 24 | 12mm. thick cement plaster (1:6) for brick work-Ground Floor |
| 25 | 12mm. thick cement plaster (1:6) for brick work-1st Floor |
| 26 | 16 mm. thick cement plaster (1 :6) over brick or stone masonry per 1Sqm.Ground Floor |
| 27 | 16 mm. thick cement plaster (1 :6) over brick or stone masonry per 1Sqm.1st Floor |
| 28 | Iron work for door, window, grills, welding, Labour, carrrage placing in position etc complete . |
| 29 | Painting two coats with enamel paints over one coat of primer with approved quality paints & primer to Wood/Iron work including cost of paints & primer,T&P and labour charges etc complete. |
| 30 | Finishing surface of walls with Cement based wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 31 | Wall painting with plastic emulsion paint of approved shade on new work of two coats over one coat of primer including cost of paints & primer and labour charges etc complete. |
| 32 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand ) and filling joints with white cement of approved quality including cost of all materials , labour T & P etc required for the work all complete as per direction of Engineer-in Charge. |
| 33 | Fixing tiles in floors trades or steps and landing on 25mm bed of cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles per 1sqm (data for 10sqm) |
| 34 | Supplying, fitting, & fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of 32mm x 32mm x 2mm @ 0.90 mtr.C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 row in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 35 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778, as windows frame section No. 4095,4096 and 9777,3994 as shutter frame with 5mm thick black glass as panel fitted arrangement including all fitting including cost of materials all taxes labour, T&P including cost of glass etc.complete as per direction of Engineer-in-charge. |
| 36 | Solid Door With Laminate ( B/S) |
| 37 | Solid Door With Aluminium Sheet |
| 38 | Finishing wall surface with weather coat paint of approved shade on new work of two coats over one coat of primer including cost of paints & primer and labour charges etc complete.Ground floor |
| 39 | Finishing wall surface with weather coat paint of approved shade on new work of two coats over one coat of primer including cost of paints & primer and labour charges etc complete.1st floor |
| 40 | Removing the Dismantling materials and excavated earth upto 5 Km from the site |
| 41 | Add for Tranparancy board,Taking photograph and signage |
| 42 | Internal Electrical Work |
| 43 | Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISi marked MakeAncbor /Polycab/Havells/RR KADLE in 20 mm dia HMS FRLS PVC conduit ISi Marked Make-Anchor/Potycab with 6 Amp modular type (anti bactorial & flame retradant type ) switch ISi marked Make Schneider(Zencelo) /Legrand(Myrius-N EXT GEN)/Panasonic(Vision)/Havells of suitable modular box , 250 V clip in type switch , ceiling rose with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex: /Polycab/ Anchor / Ravels) (Make of modular box,cover,switch & socket-Legrand Arteor/schneider Zencelo/Equivalant.) With 10Years Warenty. |
| 44 | Group C |
| 45 | Recessed winng to secondary light poi.,! looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISi marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISi marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels) Average Length: 3 mtr |
| 46 | Recessed wiring to ceiling fan point with l.Ssqmm FRLSH PVC insulated single core multistrand copper conductor of ISi marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.Ssqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels/eq) Group B |
| 47 | Recessed wiring to Twin control light pointwith 1.5 sq.mm FRLSH PVC insulated singlecore multistrand copper conductor of ISImarked in 20 mm dia non-metalic PVC conduitwith 6Amp, 250 Vcl ip in type 2way switch ISImarked and ceiling rose ISI marked mounted onGI modular box with face plate & cover ofsuitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copperconductor as earth wire including all accesoriesand connection as per direction of Engineer-incharge. (Make of wire Finolex /Polycab/ Anchor/Havels/eq) Group C |
| 48 | Recessed wiring for 5 /6 amp socket outletwith 6Amp, 250 V clip in type modularswitch(anti bactorial & flame retradant type) &other required accessories of 1SI marked MakeLegrand(Myrius-NEXTGEN)/Havells/Panasonic (Vision) mountedon G.I moular box with face plate & cover ofsuitable size including all accesories andconnection on same switch board as per direction of engeering in charge |
| 49 | Recessed wiring for 5 /6 amp socket outletwith 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISImarked Make-Legrand (Myrius-NEXTGEN) /Havells/Panasonic (Vision) in 20 mmdia non-metalic PVC conduit with 6Amp, 250 V|clip in type switch ISI marked mounted on G.Imoular box with face plate & cover of suitablesize, with 1.5 sq.mm FRLSH PVC insulatedsingle core muitistrand copper conductor asearth wire including all accesories andconnection on separate board as per directionof Engineer-in-charge.(Make of wire Finolex|/Polycab/ Anchor / Havels/eg) Group C |
| 50 | Recessed wiring for 2 x 6 amp socket outletcontrolled by 2 nos 6Amp, 250 V clip in typelswitch ISI marked Make-Legrand(MyriusNEXT GEN)/Havells/Panasonic (Vision) NOS.mounted on single G.I moular box with faceplate & cover of suitable size including alIaccesories and connection on separate board as per direction of engeering in charge |
| 51 | Recessed wiring for 6 pin 16 amp socket outletwith 16Amp, 250 V clip in type switch ISImarked Make-Legrand (Myrius-NEXT|GEN)/Havells/Panasonic (Vision) mounted|on G.I moular box with face plate & cover ofsuitable size including all accesories andconnection as per direction of Engineer-in|charge. |
| 52 | Supplying,fixing of 1 x6A+1X1 6A Plug on theseparate board with complete fitting by 01 no of16A+1 no 6A switch & socket(modular type)(lame retradant type)) with suitable size modularbox & cover( flame retradant type) includingsupplying of all required accessories of ISImarked as approved as per direction of engg-incharge.. Make-Schneider(Zencelo)/legrand(Myrius)Panasonic (vision)/Havells All theswitches & sockets should be warrantied for areplacement period of 2 years against defects|with ncessary test report & Warrnaty certificate tobe submitted to the department for genuinity ofproduct & to avail free aftersales service withinwarranty period for acceptance of materials. |
| 53 | Supplying.fixing of 3x6A+1X1 6A Plug on theseparate board with complete fitting by 01 no of16A+3 no 6A switch & socket(modular type)((flame retradant type)) with suitable size modular|box & cover( flame retradant type) includingsupplying of all required acocessones of ISImarked as approved as per direction of engg-incharge. Make-Schneider(Zencelo)/legrand(Myrius)Panasonic (vision)/Havells All theswitches & sockets should be warrantied forareplacement period of 2 years against defectswith ncessary test report & Warrnaty certificate to|be submitted to the department for genuinity ofproduct& to avail free aftersales service withinwarranty period for acceptance of materials. |
| 54 | Supply and installation of 25 A AC StarterModular type Make-Havells/Schneider/Siemens/Legrand Coil Voltage-230 Volt A.C|on Modular Box of Suitable size includingmodular cover as required as per direction ofengineer in charge.All the Components shouldbe Warrantied for a replacement period of 2years against defects with necessary test report& Warranty Certificate to be submitted to the|department for genuinity of product & to avail|free aftersales service within Warranty period|for acceptance of materials. |
| 55 | Recessed wiring to exhaust fan/Wall Fan pointwith 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with |6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels/eq) Group |
| 56 | Supply and fixing CALL BELL (Ding Dongtype)/Buzzer on the existing switchbox/Cover.(Make-Havells/Anchor) as perdirection of engineer-in-Charge.All theComponents should be Warrantied for areplacement period of2 years against defects|with necessary test report & WarrantyCertificate to be submitted to the departmentfor genuinity of product & to avail freeaftersales service within Warranty period foracceptance of materials. |
| 57 | SUBMAIN. |
| 58 | Recessed wiring to submain in 2x 6 sq.mmFRLSH PVC insulated single core multistrandcopper conductor of ISI marked confirming toIS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit along with 1 x 2.5 sq.mm |FRLSH PVC insulated single core multistrandcopper conductor as earth wire as equired.(Make of wire Finolex /Polycab/ Anchor/Havels/eg) (2 Sub Main DB to Panel) |
| 59 | Recessed wiring to submain in 2 x 4 sq.mmFRLSH PVC insulated single core multistrandcopper conductor of ISI marked confirming toIS-694/1990 in 20 mm dia non-metalic heavyduty PVC conduit 16 mm thick along with 1 x|2.5 sq.mm FRLSH PVC insulated single coremultistrand copper conductor as earth wire as|equired. (Make of wire Finolex /Polycab/|Anchor/ Havels) |
| 60 | Recessed wiring to submain in 2 x 2.5 sq.mmFRLSH PVC insulated single core multistrand|copper conductor of ISI marked confirming toIS-694/1990 in 20 mm dia non-metalic heavyduty PVC conduít 1.6 mm thick along with 1 x |1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/|Anchor / Havels/eq)Mtrs |
| 61 | IRecessed wiring to submain in 2x 1.5 sq.mmFRLSH PVC insulated single core multistrandcopper conductor of lSI marked confirming toiS-694/1990 in 20 mm dia non-metalic heavyduty PVC conduit 1.6 mm thick along with 1 :1.5 sq.mm FRLSH PVC insulated single corel Mtrs multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/|Anchor / Havels/eq) (For Switch BoardLooping) |
| 62 | 1x1.5mm2 for inverter wiring |
| 63 | Supply and fixing of following way three poleand neutral, sheet steel, MCB distribution, 415V on surface / recess, complete with tinned|copper bus bar, neutral bus bar, earth bar, dinbar, hinged front acrylic cover for the MCBknobs detachable gland plate,interconnections,phosphatized and powder painted including earthing etc. as required wih necessary MCBRCCB / ISOLATORS as required.Note for MCBThere should be colour indication for trippingOn ,off & Trip/There should be mid tripposition for toggles for electrical faultconditions. |
| 64 | S/F of 8 way SPN double door DB box with 6 no. of 6A to 32A SP MCB rating 240 VJ415V \\"C\\"Series with 1 no of SPN MCB DB ofHavelis/HPLAnchor/L&T make. |
| 65 | Supply, installation,testing and commissioning of Main switches(1S 13940 part-3/1993) of following capacity on existing surface MWall mounting and completer with HRC fuselinks,interconnections,earthing etc as required as required |
| 66 | 63 Amp ICDP Main switches with M.S Board. |
| 67 | SIF of 6 sa. mm PVC TIC U.B aluminium Service Wire with No.10/12SWG G.I supporting wire |
| 68 | CABLE |
| 69 | Supply and fixing PVC Alurminium armoured XLPE 2 C X10 Sq.mm Cables insulated ISImarked. (Make-Havells/Polycab/KEVRR) |
| 70 | SIF of Gate light jally duly fabricated at well mounted with C.C masonary work etc. |
| 71 | END TERMINATION |
| 72 | Supplying and making end termination withbrass compression gland and aluminum lugs for following size of PVC insulated and PVCsheathed / XLPE aluminum cable of 1.1 KV asrequired. |
| 73 | 2Cx 10 sg.mm |
| 74 | EARTHING |
| 75 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required. |
| 76 | Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0 5 meter below ground level as strip earth electrode including soldering etc. As required. |
| 77 | Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required. |
| 78 | Supply and making brick massonary pedastal with extra super structure including cement plastering with EARTH PIT Written on1.5x1.5 flat GI Plate chanel attached with rod as required as per direction of Engineer-in-charge. |
| 79 | FIXTURE |
| 80 | Supply, installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact |fluorescent fitting /LED fitting of all sizes compiete with all accessories and lamp etc.directiy on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthingrequired.Make JAQUAR /philips /wipro/ Equivalant. |
| 81 | SITC of energy efficient LED tube lightfittings with decorative alluminium batenand LED tube light having power ratingnot more than 20 watt and lumen outputnot less than 2200 Iumen complete withelectronic driver and all other accessories|with diffuser having 2 years warranty ilcconnection etc as required as perdirection of Engg. -in-Charge. (Make:Panasonic/LT/Havells /Philips/Wipro|/Crompton/Bajaj). The luminaire should|be Replacement Warranty will be 2 years |
| 82 | |Supply, Installation, Testing and Commissioning setof 400mm wall mounted fan (Make-Bajajl /Usha/crompton). |
| 83 | Supply & fixing of Ceiling/ Wall mounted typeBULK HEAD Luminaire with Similar to JaquarCat No.LBLKO2X010XW or equivalent. |
| 84 | S/F of Bakelite angle holder/batten holder (makeAnchor/Havells or equievalant reputed makecatagory ISl marked as approved Jof ISI markedconforming to IS-1258/198 7in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period foracceptance of materials. |
| 85 | Supply and fixing of 1X18 Watt T-8 LED Tube Fixtures similar to BAJAJ Catalogue No.-BLRB-DB 218 Or equivalent |
| 86 | Supplying, installation, testing and commssioning of 1200 mm sweep|white/milky colour BLDC copper|winding ceiling fan with aluminium bladeshaving wattage not more than 28W andair delivery 2215m3/min Make|Atomberg/Crompton Energion Groove|Havells Efficiencia Neo/UshaTechnix/Bajaj Turbo Pro 12DC5 )including wiring the down rod of standard|length (upto 30 cm) with 1.5 sq mm PVCinsulated, copper conductor, single corecable etc. as required as per direction ofEngg.-in-Charge, Replacement Warrantywill be 4 years.(With fan Regulator) |
| 87 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make Havells/ Crompton/ Usha/ OrientBajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as perdirection of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 88 | Supply & fixing of 12W LED Down Square Light(s/R) similat to Jaquar Cat noLNRO02S012SW/Eq. model of Bajaj/Eq.with allaccessories.. |
| 89 | Surface/Recess LED Light fitting (1500 Lumen) of make BAJAJ (CAT No:BGSLO SLEEK SURFACE 15WWH SQ) | Equivalent of Philips/LightingTechnologies. |
| 90 | |Supply & fixing of 70W LED Street Light forBuilding Premises light similar to JAQUAR CATNO-LSRT015070XW /Equivalant With allaccessories. |
| 91 | S/F of Street light- 90W, 120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway minaire with high power LED as light source with acrylic cover (Make: Panasonic/L T/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 92 | Supply and fixing of LED Gate light Ruby LED POST TOP bearing Item descriptionRUBYPT 40WLED757PSYMTOPC (MakeHavells/Crompton/ Panasonic ) |
| 93 | Supply ,Installation ,Testing and Commission of Inverter, Cruze UPS 2KVA-2,4V( makeluminous/ Exide/Microtec) |
| 94 | Supply,lnstallation,Testing and Commission ofInverter Battery 12V 1 SOAH ( make -Exide/Luminous) |
| 95 | Supply of Inverter stand (make- Microte /Luminous) |
| 96 | Supplying an fixing of recess/surfacemounted 2'x2' 36W(595mmx595mmx70mm) squareshaped LED with lumen efficacy not lessthan 130Im/W, CRI not less than 80, CCTof 5700-6500 degree K, THD less than10%,internal surge protection of 3 KV,complete with Non integrated isolatedelectronic driver (protects the output/secondary side from any disturbance onthe input / primary side ensuring safeoperation)and all other accessoriessuitable for operation on140- !70 V, 50Hz ,L70 @50,000 burning hrs (5 yearswarranty) as required as per direction ofEngg.-in-Charge (Make:Panasonic/L T/Havells /Philips/Wipro/Crompton/Bajaj) . The luminaire must beReplacement Warranty will be 5years. |
| 97 | S/F of 3 watt LED Down I ight. (Make: Have I ls/Crompton/Baja j/Eq uivalent). |
| 98 | SAFETY EOUIPMENTS |
| 99 | Supply and fixing of fire buckets with angularfabricated stand to fix 4 buckets in each standlror Electrical fire protection as per standards ofl Electrical Inspectorate. |
| 100 | supply and fixing Co2 fire extinguisher with mountmg clamps with pressure test certificate. |
| 101 | TV /DATA |
| 102 | Supplying and fixing of clip in type modularTelephone socket ISI marked mounted on G.Imodular box with face plate & cover of suitablesize including all accesories and connection as per direction of Engineer in Charge. |
| 103 | Supplying and fixing of clip in type modularT.V. antenna socket ISI marked on mounted onG.I modular boX with face plate & cover ofsuitable size, including all accesories andconnection as per direction of Engineer inCharge. |
| 104 | Supplying and fixing of folowing sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit asrequired. |
| 105 | Internal PH Work |
| 106 | Supplying all materials, labour T&P for fixing of double syumphonic commode with porcelain cistern including seat, cover with integral S.Trap and fixing to the floor with wooden plugs & C.P. screws and jointing the trap with HCI pipe etc.including all complete as per direction of EIC(Jaguar Make)Bed Room / Master Bed Room |
| 107 | Jaguar make Cat No. CNS-WHT-961SPP Wall Hung WC |
| 108 | Supplying all materials,labour and T&P for fixing 10 ltr capacity low level cistern with fitting such as siphonic arrangement,15mm. nominal size PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 40mm.dia. porcelain enamelled flush bend, 12mm. dia. PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc. all complete as per specification.Bed Room / Master Bed Room |
| 109 | Jaguar make Cat.No- WHC-WHT-184AN |
| 110 | Supplying all materials,labour and T&P for fixing water closet (I.W.C. or Orissa pan) duly embedded in cement concrete (1:3:6) using 12mm. size h.b.g. chips [Excluding foot rest for I.W.C. and trap] all complete as per specification |
| 111 | Bed Room / Master Bed Room |
| 112 | Common Toilet |
| 113 | Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.Jaguar make Cat No. FNS-WHT-40801 |
| 114 | Bed Room / Master Bed Room |
| 115 | Common Toilet |
| 116 | Daining |
| 117 | Supplying all materials,labour and T&P for fixing pedestal for wash hand basin complete recessed at the back for the reception of pipes and fittings etc. all complete as per specification (Jaguar make) |
| 118 | Bed Room / Master Bed Room |
| 119 | Common Toilet |
| 120 | Daining |
| 121 | Supplying all materials,labour and T&P for fixing kitchen sink/ laboratory sink with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification |
| 122 | Kitchen |
| 123 | Supplying all materials,labour and T&P for fixing cromium plated brass shower rose with 15mm. or 20mm. inlet including polishing etc. all complete as per specification.(Jaguar Make) |
| 124 | Health Faucet (Jaguar make Cat No. ALD-565)Bed Room / Master Bed Room |
| 125 | Over Head Shower (Jaguar make Cat No. OHS-1789)Bed Room / Master Bed Room |
| 126 | Common Toilet |
| 127 | Supplying all labour and T&P for fixing of C.P.fitting fixture of the following size as per specification all complete.(Jaguar Make) |
| 128 | 15mm dia C.P Angular Cock with stop cock (Jaguar make Cat No-COP-057PM )Bed Room / Master Bed Room |
| 129 | Common Toilet |
| 130 | Daining |
| 131 | 15mm. dia.C.P.Bib Cock long Body (Jaguar make Cat No-Cap- 107PM )Bed Room / Master Bed Room |
| 132 | Common Toilet |
| 133 | Daining |
| 134 | Outside |
| 135 | 2Way Bib Cock with wall flange (Jaguar make Cat No-COP-041PM)xBed Room / Master Bed Room |
| 136 | 15mm dia PVC Connection Pipe Bed Room / Master Bed Room |
| 137 | Common Toilet |
| 138 | Daining |
| 139 | 32mm dia PVC waste Pipe Bed Room / Master Bed Room |
| 140 | Common Toilet |
| 141 | Daining |
| 142 | Supplying all materials, labour, T&P and fixing PVC pipes (4Kg/Cm2) and fittings to walls with nails, bobiins and wooden plugs as per P.H. sepcification. |
| 143 | (a) 110mm dia PVC Pipe (4kg) |
| 144 | (a) 160mm dia PVC Pipe (4kg) |
| 145 | Supplying all materials,labour,T&P and laying to leave and slope and jointing with sulvent cement for PVC pipes including bed concrete and (1:4:8) and humps over top the pipe (1:2:4) as per specification all complete |
| 146 | (a) 110mm dia PVC Pipe (4kg) |
| 147 | (b) 160mm dia PVC Pipe (4kg) |
| 148 | Supplying all materials, labour, T&P for fixing PVC waster storage tank including cutting holes through the tank and fixing G.I. pipes and fittings and providing extra socket, jam nut, fixing ball valves etc. including hoisting up to a height of 5mtr. above ground level and placing the tank to the required position all complete as per specification and direction of Engineer in charge including cost of PVC tank and ball valves, copper ball etc. complete.Supplying all materials,labour,T&P and laying to leave and slope and jointing with sulvent cement for PVC pipes including bed concrete and (1:4:8) and humps over top the pipe (1:2:4) as per specification all complete1000 Ltr Capacity water storage Tank |
| 149 | Supplying all materials,labour and T&P for fixing (600mmx450mm.) bevelled edge mirror of superior glass mounted on 6mm. thick A.C. sheet or ply-wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification.[3.3.26./357] . |
| 150 | Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized PVC pipes conforming to [ASTM-D-1785/89,Sch-80.],the following nominal diameter with fittings and clamps including testing as per specification all complete |
| 151 | (a) 20mm dia PVC Pipe |
| 152 | (b) 75mm dia PVC Pipe Please Enable Macros to View BoQ information |
