Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Civil Works Earth work in excavation of foundation of structures in all types of soil as per drawing and technical specification, including setting out, shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom to required level and line, backfilling the excavated earth to the extent required including compaction and utilising the remaining earth locally for road work including all Cost, Conveyance, royalties of all materials, labour, Tand P, cess and machinaries required for the work etc. complete as per direction of the Engineer-In-Charge. |
| 2 | Supplying and filling in foundation and plinth with sand including watering ramming, complete with all leads and lifts including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and Tand P required for the work complete and as per direction of Engineer-in-charge. |
| 3 | Cement concrete of prop (1:4:8) using 4cm size H.G. metal of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering and curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and Tand P required for the work complete and as per direction of Engineer-in-charge. |
| 4 | Cement Concrete (1:2:4) using 12mm size H. G. chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and Tand P required for the work complete and as per direction of Engineer-in-charge. |
| 5 | Flyash brick masonary in C.M.(1:6) in Foundation and Plinth using 9\\" size flyash bricks including splays cutting, circular moulding, champering and corbelling, watering and curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and Tand P required for the work complete and as per direction of Engineer-in-charge. |
| 6 | R.C.C. work in M-20 using 20mm using size CB chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering and curing for four weeks, centering, shuttering and finishing exposed surface smooth including all cost, conveyance, cess and royalities, of all materials with labour and Tand P required for the work complete and as per direction of Engineer-in-charge. a) Column Base |
| 7 | b) Plinth Bend |
| 8 | c) Column |
| 9 | d) Lintel |
| 10 | e) Chajja |
| 11 | f) Beam |
| 12 | g) Roof Slab |
| 13 | Straightening bent up or coiled rods cutting, bending, craking, hooking, welding or jointing (if required) the M. S. rods or Tor steel and binding wires and binding tying the grills hoisting, lowering and placing in proper position as required for RCC works and for providing cost, conveyance of M. S. rods or Tor steel and binding wires of 18 to 20 gauge and labour and cess with all Tand P required for the work etc., complete in all floors (weight of binding wires will not be considered for payment and payment will be made on weight of M. S. rods or Tor steel only) as per direction of the Engineer-in-Charge. |
| 14 | 2.5cm (1\\") thick grading concrete in (1:2:2) using 6mm size C. B. H. G. chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering and curing etc., complete including cost, conveyance, cess and royalities of all materials with labour and Tand P etc., required for the work complete and as per direction of he Engineer-in-Charge. |
| 15 | Flyash brick masonary in C.M.(1:6) in superstructure using 9\\" size flyash bricks including splays cutting, circular moulding, champering and corbelling, watering and curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and Tand P required for the work complete and as per direction of Engineer-in-charge. |
| 16 | 16mm thick cement plaster in C.M. (1:6) over brick work finished smooth after raking out joints including watering and curing etc., complete including cost, conveyance, cess and royalities of all materials with labour and Tand P required for the work complete and as per direction of Engineer-in-charge. |
| 17 | 12mm thick cement plaster in C.M. (1:6) over brick work finished smooth after raking out joints including watering and curing etc., complete including cost, conveyance, cess and royalities of all materials with labour and Tand P required for the work complete and as per direction of Engineer-in-charge. |
| 18 | Supplying, fitting, fixing in all floors of M.S. iron and door, window, grill gates, M. S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M. S. Suare bar / flat including stair case hand railing with 40mm dia G.I. pipe etc., including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials and labour , Tand P, sundries etc., complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 19 | Supplying, fitting and fixing in position well dressed and well seasoned Salwood work framed and fixed (Wrought and Put of) in trusses, purlins, frames of doors, windows, ventilators and beams with cost and conveyance, royalties and taxes of all materials and labour with Tand P required for the work etc., complete in all respects in all floors as per the direction of Engineer-in-charge |
| 20 | Supplying, fitting, fixing of Vetrified tiles of size 600mmX600mm of approved make the conforming to IS:13755 laid on 20mm thick cement of mortar (1:4) and filling joints with white cement of approved quality including cost, conveyance, cess, royalties of all materials, labour and Tand P etc., required for the work complete and as per direction of he Engineer-in-Charge. |
| 21 | Supplying and fitting-fixing of Un plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Casement Door 60 Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated and welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638 14,EN 477 95 and other applicable codes and standards. |
| 22 | Supplying and fitting-fixing of Un plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Three Track Two Panel sliding window 60 Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 2.5 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated and welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638 14,EN 477 95 and other applicable codes and standards |
| 23 | Supplying and fitting-fixing of Un plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Ventilator/Top Hung 60 Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the door sash shall be fitted with 6mm thick clear toughened glass of SAINT GOBIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638 14,EN 477 95 and other applicable codes and standards. |
| 24 | Providing weather coat two coats over a coat of wall primer to outside wall surface with approved shade including sand papering, applying putty wherever necessary and cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess, Tand P etc. complete as per the direction of the Engineer-in-charge.. |
| 25 | Painting two coats with any approved enamel paint over a coat of primer of red oxide primer to iron works including cost paint, sand papering, polishing the surface including cost, conveyance, cess and royalities of all materials with labour and Tand P etc., required for the work complete and as per direction of the Engineer-in-Charge. |
| 26 | Finishing wall with water based wall putty to inside wall surface including sand papering, applying putty wherever necessary and cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess, Tand P etc. complete as per the direction of the Engineer-in-charge. |
| 27 | Painting two coats with plastic emulsion paint over a coat of wall primer to inside wall surface including sand papering, applying putty wherever necessary and cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess, Tand P etc. complete as per the direction of the Engineer-in-charge. |
| 28 | Supplying, fitting and fixing of durashine (TATA) sheet in roofing including fixing of wind ties, J. Hooks, G.I. or limpet washers with bolts and nuts drilling in wing ties with all Tand P etc., complete including cost, conveyance, cess and royalities of all materials with all labour and Tand P required for the work complete and as per direction of Engineer-in-charge. |
| 29 | Providing and laying Granular Sub-base with Grading-VI stone screening materials as per Table 400-1 as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 401 of MoRTand H Specifications for Road and Bridge works (5th Revision) and including cost and conveyance of all materials, labour, Tand P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 30 | Providing and laying of 80mm thick factory made cement concrete interlocking paver block of M-40 grade and approved make, varity, colour and size made by Block making machine with strong vibratory compacrion of approved design and shape laid in required colour and pattern over 50mm thick compacted bed of coarse sand, filling the joints with find sand etc, all complete include cost, conveyance, royalty, taxes of all materials, labour Tand P etc, complete as per direction of Engineer-in-Charge. |
| 31 | C. C. (1:1.5:3) using 12mm size H. G. chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering and curing for four weeks, centering, shuttering and finishing exposed surface smooth including all cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and Tand P required for the work complete and as per direction of Engineer-in-charge. |
| 32 | Dismentalling and removing of old brick stone masnory including stacking the useful materials for reuseand removing and cleaning the debries within 50m lead including cost, conveyance, royalty of all materials with labour and Tand P required for the work etc., complete as per direction of Engineer-in-charge. |
| 33 | Excavation loading , unloading and carriage by mechnical means of all kinds of soil including stoney earth, gravel and moorum etc., with all lifts and lead cuting and ladoing in tippers including trimming of stopes and bed to design section and deposting the excavated materials away from work site as per the specification and direction of Engineer-in-Charge. |
| 34 | EI WORKS Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/ Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/ legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials. |
| 35 | -do- light point Group-B |
| 36 | -do- light point Group-C |
| 37 | -do- Fan point Group-B |
| 38 | -do- E. Fan point Group-C |
| 39 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch and socket(modular type)( flame retradant type)) with suitable size modular box and cover( falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) (Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials. |
| 40 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch and socket (modular type)( flame retradant type)) and other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials. |
| 41 | Supplying,fixing of 2x6A Plug on the separate board with complete fitting by 01 no of 2 nos 6A switch and socket(modular type) ( flame retradant type) with suitable size modular box and metallic cover plate (both side)( falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand( ( Myrius) /Panasonic (vision) (For equipement power). (Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials. |
| 42 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch and socket(modular type)( flame retradant type)) with suitable size modular box and cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials. |
| 43 | S/F of step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make: legrand Myrius /Schneider(Zencelo)/Panasonic(Vision)) |
| 44 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 45 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/ Norpak/ Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5) |
| 46 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/ Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5) |
| 47 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5) |
| 48 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery greaterthan or equal to 215m3/min Make Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .( fan Regulator compatible) |
| 49 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing and conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 50 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 51 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. |
| 52 | 8 way SPNDB (GLAZED door) |
| 53 | Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years.. |
| 54 | Supplying and fixing 6-32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years. |
| 55 | Supplying and fixing 25 Amps 2P 240 volts RCCB 30 mA Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years. |
| 56 | S/I/Tand Commissioning of LT indoor/outdoor floor/wall mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted and painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) PUMP)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel and accessories must be 3 years and compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 40ka shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed. |
| 57 | S/F of Street light- 60W,120 lm/w efficacy , new generation energy saving and environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 58 | Supply of 7 mtr long single arm hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat as per direction of Engg. in Charge. |
| 59 | Supply and fixing of 9mtr high Octagonal GI pu painted pole shall be designed to withstand the maximum wind speed as per IS 875. The top loading i.e. area and the weight of fixtures are to be considered to calculate maximum deflection of the pole and the same shall meet the requirement of BSEN 40-3-3:2003. Octagonal Poles made from HT Steel Conforming to grade S355 and having thicknessof 3mm.Top dia 70mm and Bottom dia 175mm single sharp welding with base plate dimension 275x275x16 mm and Base Plate must be Fe 410 conforming to IS 2062, foundation bolts must EN 8 grade and bolts size must be 4X24mm dia,PCD 275mm,Bolt length 750mm long.The door opening of the pole should be reinforced,water proofed and with locking arrangement and arrangement of in build junction box with 2nos 6Amp MCB (mcbs make should be Siemens/schneider ) and terminal box with provision for connection of earth and nutral on 5mm thick fiber plate which will be kept in side the pole for termination of cable and wire,The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding.There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process The poles shall be hot dip galvanized in single dipping as per BS EN ISO 1461 standards with avarage coating thickness of 70 Micron. Pole should have the clamp holding arrangement at 5mtrs height for fixing decorative single arm design bracket. ( Make- Bajaj/LYSAGHT/ VALMONT/Utkarsh/RR Ispat . Design is specially as per drawing as per direction of Engineer in charge.(Ring type round arm having provision for 4 nos. LED Floodlight) |
| 60 | Foundation and erection of 9 mtr street lighting pole along with all materials and labour M20 concrete, as per direction of engineer incharge as per approved design |
| 61 | Supplying, Erection, Fixing, connection and testing of 40W LED GATE Light of Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) maintenance free having 5 years warranty G.I P ipe with braket including MCB box and including with foundation as per the Drawing for inspection as required and as per direction of Engg.-in-Charge. |
| 62 | Supplying, Erection, Fixing, connection and testing of 100W FLOOD Light of Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj maintenance free having 5 years warranty wit including MCB,stainless steel braket along with driver and including with foundation as per the Drawing for inspection as required and as per direction of Engg.-in-Charge. |
| 63 | S/IT/C of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts and washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil and rock as required and as per direction of Engineer-in-charge. |
| 64 | Providing and fixing swg 6 GI wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge. |
| 65 | 4core x 6 sq mm |
| 66 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 67 | Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials |
| 68 | S/I/Tand Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm hot dip galvanised steel sheet duly derusted and pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 25A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 32 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,03 nos 10A 4P MCB as outgoing Make-LEGRAND-dx3/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. Ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period 3 years of acceptance of materials |
| 69 | Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn |
| 70 | Supply of Roof conductor holder for parapet- PolyamideConductor holder:With M8 female thread or diameter 7mm, M8Screw to connect the conductor holder.Weather andtemperature resistant from -35 to +90 degree Celsius tested.Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn |
| 71 | Supply of Polyamide roof cable holder for flat roof:DIN 48829 Form B1. Closed form with bottom. Filling weight1Kg (frost-resistant concrete). Sleeve from polyethylene, black@ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn |
| 72 | Supply of Connector: For T cross and parallel connectors. Quickinstallation using hexagonal bolt M10X30 high-grade hot dipgalvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn |
| 73 | Supply of 1 mtr vertical air terminal with mounting accessorieson the flat surface to meet the requirements of IS/IEC 62305.Tested for Electrical , mechanical and chemical as per IEC62561. Tested for 100kA lightning current. Make-OBO/Dehn |
| 74 | Supply of Vertical air terminal with accessories:Providing of Air terminalsas per IS-IEC -62305 part-3Nominal size Ø10/16 mm aluminium rod:3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN48801) Suitable for high wind load.Tested as per IEC 62561. Make-OBO/Dehn |
| 75 | Supply for Providing of Stand for Fang Fix system 16 kg with base andclamp ,made up of frost resistant concrete and clamp testedupto 100KA lightning current . Make-OBO/Dehn |
| 76 | Supply for Providing of Stand for Fang Fix system 16 kg made up of frostresistant concrete. Make-OBO/Dehn |
| 77 | Supply of Test Joint (Folding Clamp) suitable to connect 8mmround conductor and max by 30x3 mm GI strip as specified indrawing and directed by Engineer.Tested for 100kA lightning current. Make-OBO/Dehn |
| 78 | Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr HeightFor Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn |
| 79 | Supply of Galvanised Steel Flat 30X3 mm thickness from earthelectrode directly in ground as required. Flat conductor HotDipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn |
| 80 | Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn |
| 81 | Supply of flat conductor holder- Fit: FL 30, With mounting hole6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece fromhot-dip galvanised steel, Bottom section from polyamide, black.Tested as per IEC 62561. Make-OBO/Dehn |
| 82 | Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn |
| 83 | Supply of UL Listed maintenance free ,Low carbon coppercoated earth rod of 3 metre electrode having diameter of 17.2mm with copper coating thickness of 250micron tested as perIEC 62561-2 Make-OBO/Dehn |
| 84 | Supply of universal clamp made of SS to connect rod with flatconductor Make-OBO/Dehn |
| 85 | Supply of Earth conductivity enhancing mineral compound shall be of 25kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn |
| 86 | Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn |
| 87 | Installation of The above arrangements including all accessories as per Direction of Engg. In charge. |
| 88 | Lt Extension including Service connection inspection security deposite and handing over the line extra ( As per the TPSODL Sanction Item ) |
| 89 | PH Works Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C - PVC pipe |
| 90 | 25mm dia C - PVC pipe |
| 91 | 32mm dia C - PVC pipe |
| 92 | Supplying all materials, labour Tand P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 93 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 94 | 15mm dia CP S. Bib cock (Con-CHR-047KN Jaquar make) |
| 95 | 15mm dia CP Long body Bib cock (Con-CHR-107KN Jaquar make) |
| 96 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 97 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 98 | 25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565 |
| 99 | 25mm dia brass full way valve (Shakti make) |
| 100 | 32mm dia brass full way valve (Shakti make) |
| 101 | 15mm CP Extension piece |
| 102 | 125mm CP grating |
| 103 | 15mm size C.P. flange |
| 104 | Supplying all materials , labour, Tand P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank roof of 1st Floor |
| 105 | supplying all materials, labour, Tand P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost and conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 106 | Supplying all materials, labour, Tand P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost and conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 107 | Supplying all materials, labour, Tand P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 108 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 109 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 110 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 111 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 112 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 113 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 114 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 115 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 116 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 117 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 118 | Supplying all materials, labour, Tand P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost and conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 119 | Supplying all materials, labour, Tand P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost and conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge European water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 120 | Supplying all materials, labour Tand P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 121 | Supplying all materials, labour Tand P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost and conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 122 | Supplying all materials, labour, Tand P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge20mmx600mm long CP towel rail |
| 123 | Towel ring |
| 124 | Supplying all materials, labour, Tand P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder |
| 125 | Supplying all materials, labour, Tand P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 126 | Supplying all materials, labour, Tand P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 600mmx450mm size B.E mirror (swivelled type) |
| 127 | Supplying all materials labor Tand P and Fitting and fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. CP revolving Shower (bend Type) |
| 128 | Supplying all materials,labour,Tand P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge stall urinal |
| 129 | Supplying all materials , labour, Tand P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 130 | Supplying all materials labour Tand P filling sand in lavatories well watered and rammed including lead of materials to work site. 7.83 x 0.15 |
| 131 | Supplying all materials, labour, Tand P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 10.98 x 0.15 |
| 132 | Female Toilet = 1 x 2.40 x 2.10 = |
| 133 | Supplying all materials,labour,Tand P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 134 | Supplying all materials, labour, Tand P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 60cmx30cm Male Toilet = 1 x 2(2.40 + 2.45) x 2.10 = Female Toilet = 1 x2( 2.40 + 2.10) x 2.10 = |
| 135 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. D4 = 2 X 0.75 X 2.10 = |
| 136 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge D4 = 2 x ( 0.75m + 2.10m+ 2.10m) = |
| 137 | Supplying all materials, labour, Tand P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge Aqua guard pure Chill 80 PSS UV |
| 138 | Extr PH. Supplying all materials, labour, Tand P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge 110mm dia PVC pipe alround concrete |
| 139 | 150mm dia PVC pipe alround concrete |
| 140 | Supplying all materials ,labour ,Tand P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge Inside size 76cmx76cmx46cm with 18 dia RCC MH cover |
| 141 | Supplying all materials, labour, Tand P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 910mmx910mmx910mm |
| 142 | Supplying all materials labour Tand P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 143 | 1 no 30 Users Septic Tank Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.1 x 4.80 x 2.40 x 1.50= |
| 144 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.1 x 4.80 x 2.40 x 0.8= |
| 145 | Supplying all materials labor Tand P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge..1 x 4.80 x 2.40 x 0.15= |
| 146 | Supplying all materials, labor Tand P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete..1 x 4.80 x 2.40 x 0.15= |
| 147 | Supplying all materials, labour, Tand P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.1 x 4.80 x 2.40 x 0.10= |
| 148 | Supplying all materials, labour, Tand P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge..1 x 4.10 x 1.70 x 0.125= |
| 149 | Supplying all materials, labour, Tand P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 150 | 1x (2x4.1+2x1.7)x0.15= |
| 151 | Supplying all materials.labour.Tand P and providing brick work in foundation and plinth with 23cmx111cmx8cm size Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:6) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. Fisrt Footing= 2 x 4.60 x 0.50 x 0.75= |
| 152 | Supplying all materials,labour,Tand P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. Bottom= 1 x 3.60 x 1.20 = wall Inside= 1 x (2x3.60 + 2 x 1.20 ) x 2.30 = |
| 153 | Supplying all materials,labour,Tand P and providing 16mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. Wall Outside= 1 x(2x4.10 + 2 x 1.70 ) x 0.90 = TOP = 1 X 4.10 X 1.70 = |
| 154 | Supplying all materials, labour, Tand P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 155 | Supplying all labor Tand P and filling foundation and plinth with excavated materials well watered and rammed etc. all complete as per direction of EIC. |
| 156 | Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only Drilling of 200mm dia bore 00 mtr to 30mtr |
| 157 | 31 mtr to 45mtr |
| 158 | Drilling of 150mm dia bore 46 mtr to above |
| 159 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 200mm dia P.V.C casing pipes 00 mtr to 60 mtrs |
| 160 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 200mm dia PVC (sch-80) pipe |
| 161 | Supplying all materials, labour, Tand P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 162 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By DTH Rig |
| 163 | Supplying all materials, equipment, labour and conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey and selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: Rocky terrain with boulder formation for 300m depth |
| 164 | Supplying all materials, labour, Tand P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 165 | DOL Control panel |
| 166 | 40mm dia steel short piece |
| 167 | Well cap |
| 168 | 50mm size CI bracket |
| 169 | 2.50sqmm flat cable |
| 170 | 20mm dia rigid UPVC pipes |
| 171 | Steel rope with cover |
| 172 | Labour charges for lowering including transportation |
| 173 | Supplying all materials, labour, Tand P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 32mm HDPE pipes (Finolex/Supreme make) Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
