|
| 1 | M & L for preparation of old treated surfaces of wall including brooming down, scrapping down smoke soots etc. and appying one coat of white wash, complete all as specified and as directed. |
| 2 | All as per Item No 1 above but on ceiling complete all as specified and as directed. |
| 3 | M & L for preparation of old treated surfaces on ceiling surfaces and applying one coat of distemper complete all as specified and as directed. |
| 4 | M & L for preparation of old treated surfaces on wall surfaces and applying one coat of distemper complete all as specified and as directed. |
| 5 | M & L for complete removal of existing treatment on old treated surfaces of wall & applying two coat of distemper complete all as specified and directed |
| 6 | M & L for preparation of old surfaces of wall and applying 3 mm thick wall care putty as per direction by Engr-in-charge complete all as specified. |
| 7 | M&L for preparation of washing ,rubbing down and scrapping of plastic emulsion paint by using roller of old decorated wall surfaces including two coats of plastic emulsion paint over a coat of primer complete all as specified. |
| 8 | M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying Two coat of weather proof acrylic emultion paint over one coat of primer all as per manufacturers instructions and directed including necessary scaffolding complete all as specified by GE/Engineer-in-Charge |
| 9 | M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying two coats of damp proof paint complete all as specified and as directed. |
| 10 | M & L for preparation of old wooden painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 11 | M & L for preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 12 | Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame). |
| 13 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm |
| 14 | Taking down shutters of any description exc 1 sqm but n exc 2 sqm each |
| 15 | Taking down shutters of any description n exc 1 sqm complete all as specified and as directed. |
| 16 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 17 | Supply and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. Thepanels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specifiedby the manufacturer and as per directions of Engineerin- charge. supplying & fixing in the frame at site as per specification & sketch shown under section 8 of SSR Part II complete all as specified and as directed. |
| 18 | Supply & fix 30mm thick factory made internal PVC one side Prelem door shutter wood Free consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles as well as top bottom & lock rail. The inside panel shall consist of 20mm thick multi chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement adhesive with 5mm (+0.5) thick prelam PVC sheet of the inside panel. All the four edge of the panel to be sealed with lipping of 10mm thick & 20 mm wide PVC sheet baton(made by sticking 2Nos. rigid foam PVC sheets of 5mm (+0.5) thickness using PVC solvent cement adhesive. 20mm thick (5mm x 4 Nos) Thick PVC sheet to be given for lock provision at lock provision at lock height. including all fittings complete as per direction of Engr-in-charge, manufractures specification and drawing complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply & fix 30mm thick factory made wire mesh solid PVC door shutter consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles and 15mm x 15mm for top, lock & bottom rails. 20mm x 20mm M.S square tubes shall be covered with 5mm thick heat moulded Rajshri PVC 'C' channel of size 30mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be PVC beading on either side forming stiles & 5mm thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on the inner side to from top and bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on from lock rail 10mm (5mm x2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panel will be Alumunium wire mesh fitted in by 'C' channel of size 35mm x 10mm on the eitherside in stiles. The inner side 'C' channel is fixed by 20mm x 20mm M.S. tube on both sides with screws. The wire mesh in top, bottom & lock rail is sealed with total 8 Pars of 15mm x 15mm & 20mm x 20mmtube with Aluminium wire 10mm (5mm x 2) thick PVC strip of 25mm width is to be stuck & nails on both side of Aluminium wire mesh interior at the top, bottom & lock rail. including all fittings complete as per direction of Engr-in-charge, manufractures specification and drawing complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F II nd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. |
| 21 | S&F MS flat iron of Fe- 290 &Gde E-165 such as small articles for hold fast and similar work complete all as specified and as directed. |
| 22 | M&L for cement concrete (1:3:6) type C1 (using 20mm graded stone aggregates) in 1:4 CM as in blocks for fixing hold fasts and fillling of chowkhats or any other purpose complete all as specified and as directed. |
| 23 | S & F in repair 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. |
| 24 | S&F 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (any number of panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veveered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated. |
| 25 | S&F 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/ Gauge etc. Size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) complete. |
| 26 | S&F for stainless steel wire cloth in repairs , 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih SS wire staples complete all as specfified |
| 27 | M&L for preparing new or previously untreated surfaces wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on wooden surface |
| 28 | S&F for 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy all as specified and directed. |
| 29 | S&F for 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed. |
| 30 | S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed. |
| 31 | S & F100mm size of hinges butt hinges, medium weight, cold rolled mild steel and fixed all as directed by Engr-in-Charge. |
| 32 | S & F 100mm size extruded aluminium alloy handles, fabricated type, anodised all as directed by Engr-in-Charge. |
| 33 | S&F mild steel, 300 mm long ordinary helical door spring incl roller and roller plate complete |
| 34 | S&F magnetic catches Model No.2 for cupboard doors etc complete |
| 35 | S & F stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame including taking down old hinges all as specified and as directed. |
| 36 | M & L external teak wood lipping, 6mm thick for glass fixing or bidding fixed with nail or as per requirement for 18mm to 20mm thick Plywood or Aluminium etc complete as per direction of Engr-In-Charge |
| 37 | S&F for aluminium, anodised 100mm size of hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed. |
| 38 | S & F 5mm to 5.5 mm thick sheet glass ordinary quality area n exc 0.50 Sqm in each pane and glazing for fixing in Plywood any type in any shape and size circular cutting incl waste ,wood ,plywood and aluminum frame work all as specified and as directed by Engr-in-Charge |
| 39 | S & F 5 mm to 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for fixing in Plywood any type in any shape and size,circular cutting incl waste ,wood and aluminum frame work all as specified and as directed by Engr-in-Charge |
| 40 | S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping/fixed in Aluminium section for windows doors etc in square not exc 0.58 Sqm each in each pane all as specified and as directed. |
| 41 | S & F 3 mm thick Figure glass/ tinted glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.58 Sqm each in each pane, lovers etc all as specified and as directed. |
| 42 | S&F in repairs brass mortice lock, vertical type, size 100 mm , 4 levers with 2 keys complete all as specified & directed |
| 43 | S & F in repairs Double action floor spring Hydrauilically regulated made up of minimum 1.25 mm thick aluminium alloy sheeet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 44 | M& L for Floor door stopper 150mm long , of brass body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as spd & as directed |
| 45 | S&F looking mirror size 600 mm x 450 mm of selected quality glass, 5.5 mm thick, mounted on 6 mm thick AC building board commercial ply wood with PVC frame all round fixed with chromium plated brass screws including taking down old looking mirror all as specified and as directed. |
| 46 | S&F in repairs bathroom cabinet mirror PVC frame box type with mirror in front of size 350x450mm with glass fixed to wall with screws complete all as specified and directed by Engineer-in-Charge. |
| 47 | M&L for aluminium window/ventilators with double side hung shutter for glazing and gauging and frame with one or more rebates anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised alumium fittings such as stay, hinges glazing with 4.0 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm apperture as per drg No. 64 sheet No 1/3,2/3 and 3/3 dated 31-5-93all as specified and directed.(Tint of glass shall be approved by GE) (The thickness of frame shall be 2.5mm and thickness of shutter shall be 1.6mm the thickness of glass shall be 4.00mm.) |
| 48 | M&L for aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 4.4 mm x 7mm |
| 49 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises. |
| 50 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land. |
| 51 | Demolition of cement concrete (unreinforced) as in roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work and removing rubbish off the MD landcomplete all as specified by Engr in charge |
| 52 | M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate in as sub base of floors etc.complete all as spd |
| 53 | M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square/ rectangular) polished area of each tile exc 0.06 Sqm but n. exc 0.18 sqm as in skirting/ dado /wall etc laid over and including 10 mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed by Engineer-in-Charge. |
| 54 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 55 | M&L for light shade colour vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 56 | Demolition of stone slabs & tiles of any thickness & in any position laid, bedded and pointed in any mortar otherwise specified. |
| 57 | M&L in repairs for 18-20 mm thick granite, (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 15mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded. |
| 58 | M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified |
| 59 | Taking up or down steel tubing and connection incl removal of the following bore of pipe |
| 60 | a) 15mm bore of pipe |
| 61 | b) 20mm bore of pipe |
| 62 | c) 25/32mm bore of pipe |
| 63 | d) 40/50mm bore of pipe |
| 64 | S&F CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes. |
| 65 | 15 nominal dia of pipes |
| 66 | 20mm nominal dia of pipes |
| 67 | 25mm nominal dia of pipes |
| 68 | 40mm nominal dia of pipes |
| 69 | S&F in repair grating doom of any size of PTMT (minimum weight 40 grams) fixed with white or grey cement complete all as specified |
| 70 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm. |
| 71 | Dismantling of cast iron, PVC or reinforced concrete pipes jointed in cement mortar ncluding all fittings, heads, shoes, bends, swan-necks, etc.,and if required all as directed by Engr-in-charge of following bore |
| 72 | 100/110mm dia of pipe |
| 73 | 75mm dia of pipe |
| 74 | S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , fixed to walls complete all as specified and as directed. |
| 75 | S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , laid in trenches or in floors complete all as specified and as directed. |
| 76 | S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , fixed to walls complete all as specified and as directed. |
| 77 | S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , laid in trenches or in floors complete all as specified and as directed. |
| 78 | S&F of UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement of following sizes :- |
| 79 | 110mm dia of pipe |
| 80 | 75mm dia of pipe |
| 81 | S&F PVC (SWR) bends of following sizes :- |
| 82 | 75mm bore |
| 83 | 110mm bore |
| 84 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia complete all as specified and as directed. |
| 85 | S&F in repairs Jaquar jet spray chrome with 8mm dia, 1meter long flexible tube & wall hook health faucet wall mounted installation type . Model No- ALD-CHR-573 JAQUAR or equivalent |
| 86 | S&F in repair bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of piep. Make : Jaquar, Cat No QQT-7037 or equivalent |
| 87 | S&F in repairs Angular stop cock with adjustable wall flange, cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe. Make : Jaquar, Cat No - QQT-7053 or equivalent |
| 88 | S&F in repairs chromium plated mixing valve, wall mixer 3 in 1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe including three joints to steel pipe or unions. Make : Jaquar, Cat No QQT-7281 or equivalent |
| 89 | S&F in repairs chromium plated mixing valve (central hole basin mixer) with small spout without popup waste system with 450mm long braided hoses including three joints to steel pipe or unions. Make : Jaquar, Cat No - QQT-7167B or equivalent |
| 90 | S&F in repairs chromium plated shower rose overhead single flow 100mm dia (ABS chrome plated) without Arm including fixed to steel pipes or union and complete all as specified. Make: Jaquar, Cat No - OHS-1989 or equivalent |
| 91 | S&F in repairs chromium plated telephone shower with 1.5m long flexible tube & swill wall hook including fixed to steel pipes or union and complete all as specified. Make : Jaquar, Cat No - HSH-5537H or equivalent |
| 92 | S&F in repairs chromium plated metropole flush valve dual flow concealed type woth control cock operation plate 40 mm size including fixed to steel pipes or union and complete all as specified. Make : Jaquar, Cat No - FLV-1089Q. (Note : Including all making good with refixing tiles portion) or equivalent |
| 93 | Supply and fix in repair white vitreous China wash hand basin of size 550 x 400 mm fixed on and including new brackets complete including 15 mm size pillar tap, cast copper alloy, chromium plated with capstan head, screwed down high Pressure, screwed shank and fly nuts, screwed for iron pipe, 32 mm size brass chromium plated waste coupling, 750 mm long PVC waste pipe, PVC connection pipe, 15 mm size and 450 mm long with PTMT nuts and washer at both end etc complete. |
| 94 | S&F in repairs chromium plated soap dish holder. Make Jaquar, Cat No AQN-7731 or equivalent |
| 95 | S&F in repairs SS chromium plated toilet paper holder complete all as specified & directed |
| 96 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges single/ three tier with hooks complete all as specified and directed by Engineer-in -charge. |
| 97 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern)(wall hung type) white (excluding, flushing cistern and flush pipe) complete connected to drain make : CERA, Cat No - 2033 & 2315 or equivalent |
| 98 | S&F in repair Stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified |
| 99 | S&F in repair stainless steel kitchen plate rack of size 31\\" x 24\\" x 10\\" deep, fabricated with 0.63 mm sheet fixed in position on wall complete.Make:- Prayag, Cat No. P-340 or equivalent |
| 100 | S&F in repair 15 mm size bib cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete. |
| 101 | S& F in repairs brass chromium plated shower rose 125 mm size with arms 15 mm inlet complete. |
| 102 | S & F in repairs 15 mm size pillar taps, fancy type, cast copper alloy, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nut, screwed for iron pipe complete all as specified. |
| 103 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed. |
| 104 | M & L for Pre-cast cement concrete type B1,1:2:4 (20mm graded stone aggregate )block masonry with solid blocks,exc 10 cm in width and setting in CM 1:6 complete all as specified |
| 105 | Taking down cement plaster on walls ,ceilings etc, including racking out joints, hacking for key, scrubbing down with water etc |
| 106 | M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces. |
| 107 | M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement as specified. |
| 108 | M&L for rendering on concrete surfaces 15mm thick in two layers first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair. |
| 109 | Supply only water proofing compound |
| 110 | M&L for preparation of new or previously untreated concrete extrernal surfaces finishing walls with Acrylic Smooth exterior paint of required shade applied over and including priming coat of exterior primer all as specified and directed by EIC . |
| 111 | M&L for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 112 | M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by EIC. Please Enable Macros to View BoQ information |
| 113 | M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by EIC. Please Enable Macros to View BoQ information |
