|
| 1 | Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified. |
| 2 | Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified. |
| 3 | S&F tubular steel work in rafters, purlins including fixing to existing woodwork/ steel work with clamps, screws, nut bolts and holdfasts etc. complete all as specified. |
| 4 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 5 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 6 | Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed. |
| 7 | S&F GI frame interlocking snap grid 600mm x 600mm consists of Angle runners of min size 38mm x 25mm x 1.5mm and main Tees & cross Tees of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm etc complete including hangers of 4 mm dia. G.I. wire fixed by means of ceilling cleats made out of flat 40 x 3 mm size and expansion hold fasteners at 1200 mm intervals all as specified and as directed. |
| 8 | S&F for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed. |
| 9 | Demolition of brick work or stone/ boulder masonary, laid in cement mortar or cement lime mortar complete all as specified. |
| 10 | M&L for fly ash bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick complete all as specified. |
| 11 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth (without using extra cement) with sagol finish on plastered surface complete all as specified and as directed. |
| 12 | M&L for providing plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) for roof, kerb, or mud stops, rounded or chamfered on edges etc complete all as specified and as directed. |
| 13 | M&L for two coats of cement base paint over chalk whitening newly plastered surfaces of walls including preparation of surfaces all as specified. |
| 14 | Taking down carefully copper/ aluminum point wiring (light/ fan/ bell/ socket, power point etc) complete, including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody and refixing the same as per existing minor items like screw, clamp, casing/caping is included complete all as specified and directed Engineer-in-Charge. |
| 15 | Taking down existing Armstrong/Grid Ceiling light 36 watt / Tube light fittings of any type and any wattage for repair and re-fixing the same after repairs to its orginal position including replacement of cable PVC insulated unsheathed with copper conductor of size 1.5 Sqmm (2 runs) upto 0.5 mtr length from light fitting to Ceiling rose including connections all as directed. |
| 16 | Supply & fix 36 Watt LED Panel 2X2 environmental friendly, new generation, aesthetically designed, ultra-modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling, complete with separate electronic driver ceiling light 36 Watt with and including connecting up with & including twin core, twisted, flexible copper conductor cable of suitable size 230 Volt, 50 HZ etc complete all as specified and directed by Engineer-in-Charge. |
| 17 | Taking out/ down and opening of existing ceiling fans 1200 mm sweep, from any position, of any make etc & refixing at the desired location after reassembling and after servicing/ overhauling by thouroghly cleaning the shaft, rotor, stator and applying lubricant/grease to bearings and one coat of super enamelled varnish over winding to improve the insulation resistance including repair / replacement of spare parts/ material/ items, making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional complete all as specified and as directed. |
| 18 | M&L for preperation of ceiling fans 1200 mm sweep, of any make by cleaning of metal surfaces including painting with spray painting on required gloss with white synthetic enamel paint on complete body of fans and writing MES No with black synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge |
| 19 | Supply and fix Industrial type Aluminium housing ultra slim square profile LED lighting fixture, environmental friendly, energy efficient ready to use pack Industrial type LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge |
| 20 | Supply & fix in replacement energy saving and environmental friendly long life LED street light 35 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V, 50 HZ etc complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
