|
| 1 | Providing and fixing of BALANCING BRIDGE make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE or equivalent. Item Descriptions • Product Area : 7.3m X 0.8m (24ft X 2.6ft) • Safe Play Area : 8.3m X 1.8m (27.2ft X 6ft) • Ideal For : 5-12 Years • Friends at a time : 5-6 Technical Specification: •Side frame :40NB & 25NB hot dip galvanized pipe with GI thickness of 60μ fixed together with base plates at bottom end to form balancing bridge side frame •Top pipe : 50NB pipe is hot dip galvanized pipe of height 4830mm with GI thickness upto 60μ with an ISF conforming to IS 1730-1961 welded at its one ends pipe can withstand torsional stress created due to swinging motion •Support pipe :40NB hot dip galvanized pipe of length 2160mm with GI thickness of 60μ with base plates at bottom end to form balancing bridge support structure. •Floats :Eight Floats of dia 600mm dia is made from rotational molded LLDPE plastic suspended over two parallel MS wire of dia. 12mm 15.5ft. long. The material used is LLDPE plastic with UV stabilizers for prolong outdoor application. •Rope :Polypropylene (PP) braided Rope of dia 18mm suspended between two sides frames for children to hold grip for support against falling. Rope size conforming to standards minimum grip requirement EN 1176-1:1998. •Rotational Molded Products :The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. |
| 2 | Providing and fixing of PONY SPRING RIDER make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE or equivalent Item Descriptions • Product Area : 1m x 0.5m (3.3ft X 1.6ft) • Safe Play Area : 2m x 1.5m (6.5ft X 5ft) • Ideal For : 3-6 Years • Friends at a time : 1 Technical Specification: •Pony: Pony is made up of rotational molding process. It has been provided with four bolts. Pony is bolted to the spring assembly. •Spring assembly: It consists of top plate, spring, footrest & square base plate suitably fixed to NO. other with U-Bolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance. •Rotational Molded Products: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •Foundation Stand: Foundation Stand ade of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI hickness upto 60micron. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen olt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL hade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. |
| 3 | Providing and fixing of Four Seater MGR make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE or equivalent Item Descriptions • Product Area : 2.1m Dia (7 ft Dia.) • Safe Play Area : 3.1m Dia (10.2 ft Dia.) • Ideal For : 3-8 Years • Friends at a time : 4 Technical Specification: •MGR frame : MGR Frame made from 40NB pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for ounting the ROTO/FRP Seats over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. The GI plated bowl is used to cover the top of the bearing assembly. •Seat frame :20NB GI pipe bend and joint to form a frame structure with flat plate to mount seat. The frame is bolted to the MGR frame outer end. The frame is provided with spacers for foot rest. Hand Grip conforming to EN1176-1:1998. •Bearing assembly :Bearings are oil sealed, selflubricated made of SKF/ NRB/ NACHI / FAG / NRB make shall be provided for smooth & trouble-free movement. The whole structure is mounted on heavyduty bearing shaft. •Center suppor : 80NB hot dip galvanized center support pipe of length 500mm with GI thickness of 40- 60μ .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top for assembling the bearing. •Seat :MGR seat is made up of Fiber einforced plastic(FRP)/LLDPE . Seat designed to accommodate one child per seat with backrest; The seat is bolted to the assembly with special structure.•FRP Product :All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 40-60micron. •Powder coating: it shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO 9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap.All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. |
| 4 | Providing and fixing of Std. SEE- SAW. make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE or equivalent Item Descriptions • Product Area : 2.5m X 1.5m (8.2ft X 5ft) • Safe Play Area : 3.5m X2.5m (11.5ft X 8.2ft) • Ideal For : 4-10 Years • Friends at a time : 4 Technical Specification: •Frame: Frame of standard see-saw is designed using 15NB, 20NB & 25NB/32NB G.I. pipe and it has been given radius by suitable bending techniques. Plates has been welded at places were seat has to be installed so that seats can be fixed to the frame with suitable bolting arrangement. •Roto Seat : Rotational molded seats of thickness 6mm areused in these see-saw , it has been provided with bolts to fix it too see-saw frame which has a plates of 200X150X5mm welded on to the frame. Handle has been provided on the frame made up of 20NB pipe and also conforming to EN standards. The Multi Seater See saw comprises four roto seats. •For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •See-saw stand : 50NB Hot dip Galvanized Pipe with GI thickness of 60μ ,Pipe length 550mm Plate 150X150X5mm is used as a foundation plate for the vertical pipe. 25NB Pipe is also attached to provide extra strentgth to ths stand. •Standard See-saw Clamp: Standard see saw clamp is used in see saw so as to provide required motion for the see saw. •Bearing: The bearing used in this item is heavy duty nylon bush type •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: it shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap.Note: Images and colour of the produts are only for C9 reference. Actual product/ colour may vary. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately). |
| 5 | Providing & fixing of Double Arch Swing make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE or equivalent of size 3.20x1.50mtr. Main Frame:- Main Cross Bar made of round 75mm O.D. pipe and legs made of 50mm N.B. pipe Legs- Arch shaped bended (Must be min in G I “B” class pipe). T pipe will be required for the Cross bar. All the pipes should be ISI arked( as per the IS 1239/2004) & of reputed brand. Ensuring the Strength, durability, stability & long life to the Kids. structure with safety as paramount. Seats- Belt Type Seats made of Synthetic Rubberized material are Virgin Plastic material & also duly with UV resistant colors, Chain Made of approx. 6mm thick G,I chain with rubberized coating of with 3 mm minimum thickness, Chorme plated supporting hook for belts Hooks for convenience & height adjustment/ Seat Movement, self lubricated council type bush baring clamps provided with rubber coated chain to hang the co plate belt assebbly. The complete structure double arc swing should be powder coated with minimum powder coating thickness of 60-80 microns. Accessories: Nut bolts to be used All approved GI nut bolts Galvanised Iron with High tensile Strength. EACH 72,900/- Accessories: Nut bolts to be used All approved GI nut bolts Galvanised Iron with High tensile Strength. Kid capacity 2-8 Nos. Complete as per drawings attached and direction of Engineer-in Charge. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. |
| 6 | Providing and fixing of FRP SPIRAL SLIDE 9 Ft. make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE or equivalent Item Descriptions • Product Area : 3.3m x 2.0m (10.8ft x 6.5ft) • Safe Play Area : 4.3m x 3.0m (14.1ft x 9.9ft) • Age Group : -12 yrs. Technical Specification: •Center Support pipe: Center Support pipe made from 80NB Galvanized pipe welded to 100NB Galvanized pipe GI thickness of 60μ. •Deck pipe: It is 80NB hot dip galvanized two support pipes with GI thickness of 60μ •Handle grip: Handle grip of 20NB conforming to EN 1176-1:1998 attached with Nylon clamp of Grade-6 clamped to the Deck pipe using SS304 graded Eachn rusting nut-bolts •Ladder Frame: The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 15 NB and 20 NB pipes respectively. •Ladder Step: Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176-1:1998 conforming to EN1176-1:1998 The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. •Roto spiral Slide: It is made from rotational moulded material. The slide is completely made up of one piece with a thickness of 5-8mm keeping in consideration the ASTM & EN standards. The material used is LLDPE (Low-Density Polyethylene Plastic) in rotational molding process. •FRP latform: It is made up of Fiber Reinforced Plastic (FRP) in one piece having shell thickness of 3-4 mm. Its size is 1.16M X 1.16M.• Spiral slide railings: 20NB hot dip galvanized pipe bended to form frame with two pairs of clamps joined together to GI Pipe with SS 304 graded non rusting nutbolts conforming to ASTM E-1086:1994, made from Nylon Grade-6 plastic. The ROTO molded plastic bush & rotomolded slim railing are inserted into the pipe frame in alternate pattern. The railing frame is bolted to Spiral slide platform with 20NB GI support pipe bolted to platform at one end & clamped with special nylon clamps to railing pipe frame.•For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •For FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the roduct. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Powder coating: shall be done of pure polyester exteriors ultra-stabilized owder Paints. Thickness maintained is a minimum of 60-70 microns.•Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.Certificate: ISO9001:2015 Color: Multicolor for optional or customized Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. |
| 7 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 8 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage Please Enable Macros to View BoQ information |
