|
| 1 | Repair and maintenance works |
| 2 | Dismantling of existing Brick in cement mortar walls under 3m high including cost of all materials, hire charges for tools and plants, clearing the debris away, needed safety arrangements, all leads, lifts etc complete. |
| 3 | Dismantling of existing RCC Lintel by manual / by using deploying machineries. |
| 4 | Removal of Existing damaged Doors Windows including removal of frames, hinges and fastenings |
| 5 | Removal of Cub-board slabs |
| 6 | Providing 'Brick work in Cement Mortar 1:5 using II-Class burnt Bricks of size 9” x 4 3/8 x 2 3/4” including cost of all materials, leads, lifts, labour etc., complete. |
| 7 | Providing Reinforced cement concrete (lintel) in M20 mix using 20 mm HB granite metal , by using river sand, using portable water for works and curing, with form work including cost of cement and other materials ,lead and lift etc, complete. |
| 8 | Supplying, fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete. |
| 9 | Plastering with cement mortar 1:5, 12mm thick for inner wall surface all levels, including cost of all materials, lead, lift, labour, T&P, curing, etc., complete. |
| 10 | Earth work excavating and depositing on bank with intial lead of 10 m & intial lift of 2 m in hard stiff clay stiff black cotton hard red earth, shales, murram, gravel stoney earth, earth mixed with small size boulders and hard gravelly soil for foundation as per the direction of the Engineer with standard specifications. |
| 11 | Supplying and filling M-sand for Basement, with well watering and consolidation as per the standard specification etc, complete. |
| 12 | Providing Plain Cement Concrete 1:3:6 using 40mm HBG metal for foundation and basement including cost of all materials, lead, lift, labour for laying concrete etc., complete. |
| 13 | Plastering with cement mortar 1:3, 20mm thick for flooring all levels, including cost of all materials, lead, lift, labour, T&P, curing, etc., complete. |
| 14 | Supplying and providing steel door double leaf with 50 x 50 x 5mm door frame and 45 x 5mm MS flat for bottom frame and 45 x 45 x 5mm angle for shutter frame vertical and horizontal with 45 x 5mm angle for shutter frame vertical and horizontal with 45 x 5mm flat as stiffener with 1.50mm thick (16 gauge B G sheet) 45cm lower bolt 4 Nos., 30cm adrop 1 No. and handle one number including cost of all material, labour, lead, lift, etc., complete. |
| 15 | Fabricating, Supplying and fixng in position of steel glazed window (Two Leaves )with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 3mm thick pin headed glass and fixed with 15x12mm teakwood beading of superior quality and fixed with shutter frames.2 numbers of sturdy hinges and one number of handle to be fixed to each shutter. An MS square bar of 12mm size is welded to the inner face of the windowat an equal interval. interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers.All sections should be in confirmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete |
| 16 | White washing two coats with White cement approved quality over a primary coat over newly plastered surfaces including cost of all materials, lead, lift, etc., complete. (INNER & CEILING) |
| 17 | Painting two coats with ready mix plastic emulsion of first class quality paint and approved colour over a priming coat including through scrubbing clean removal of dirt etc, complete and including necessary plaster of Paris, petty, wherever required - 10sqm (OUTER) |
| 18 | Wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with suitable Module Plastic surface mounting switch box on wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire for Open PVC pipe power Plug point ( 8 points / Coil) Lower End |
| 19 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Lower End. |
| 20 | supply and fixing of 25W LED street light fitting with LED (Lower end) with 19mm dia on the existing post or wall with PVC unsheathed copper leads with MS clamps and with painting. |
| 21 | Supply and fixing of 400 mm sweep wall mounting fan complete. |
| 22 | Supply and fixing of 20 W 4'-0\\" LED Fitting with bulb complete with TW round block on wall or ceiling and PVC unsheathed copper leads from terminal to the fitting including cost of all material, labour, lead, lift, etc., complete. |
| 23 | Pointing with CM 1:3 in pressed tiles 20mm thick including cost of all materials, labour, lead,lift, T&P etc complet |
| 24 | Providing Galvalume colour sheet of size 0.47 mm for sunshades including J bolts & Hooks on roof, Frame, labour, cost of allmaterials, lead, lift etc., complete. |
| 25 | Supply of MS square section pipes to vertical and horizontal support for the fabrication of Galvalume colour sheet of size 0.47mm for window sunshades including cost of all materials, labour, lead, lift, etc., complete. |
| 26 | Supplying, aligning and fixing of 110 mm PVC rain water line (6 KG/Sq.cm) with necessary specials including including cost of all materials , labour, T&Ps, lead, lift, etc, complete above ground level. |
| 27 | GST fo bidders within Tamilnadu. Heading |
| 28 | GST fo bidders within Tamilnadu. Heading |
| 29 | IGST Please Enable Macros to View BoQ information |
