|
| 1 | Dismantling of brick work or stone/boulder masonary built in cement mortar or cement lime mortar, complete all as specified and directed. |
| 2 | M&L brickwork with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 3 | M&L brickwork except bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 4 | M&L Pre-cast cement concrete block masonry with solid blocks, with 390x190x190mm size, exc. 10 cm in width Type C1 (1:3:6) and setting in mortar 1:4, complete all as specified and directed. |
| 5 | Taking down cement plaster of any description on brick or stone walls etc incl raking out joints hacking for key scrubbing down with water and removing debris outside MD land upto 04 storeys buildings, complete all as specified and directed. |
| 6 | Material and labour for 15-20 mm average thick Ready Mix Plaster in multy layer of make / brand - ACC's Accoplast / CK Birla's Aerocon /mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, including use of scaffolding, complete all as specified and directed.Note: Liquid water proofing compound will be measured and paid seperately as supply only. Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/ M/s Ultratech Cement Ltd. |
| 7 | M & L for 10 mm - 12 mm Thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces(internal surface) and finished even & smooth witjhout using extra cement, complete all as specified and directed. Name of Manufacturer: M/s ACC acopalst/ CK Birla Aerocon/ M/s Ultratech Cement Ltd. |
| 8 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surfaces of walls and applying two coats Oil based distemper over a coat of alkali resisting priming paint over 1 mm thick (average) Birla white putty, complete all as specified and directed. |
| 10 | M & L for preparing new plastered surfaces of external walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Apex Ultima Protek of Asian Paint or equivalent make over a coat of primer including use of scaffoldings, complete all as specified and directed. |
| 11 | M & L for preparing old plastered surfaces of external walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Apex Ultima Protek of Asian Paint or equivalent make over a coat of primer including use of scaffoldings, complete all as specified and directed. |
| 12 | Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) Birla wall putty, complete all as specified and directed. |
| 13 | M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished even and smooth without using extra cement, complete all as specified and directed. |
| 14 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats white washing including preparation, complete all as specified and directed. |
| 15 | M&L for old loose spalled concrete should be chiseled from roof ceiling with the help of scrapers chisele & hammer after that cleaning of rust from mild steel rod applying cement slurry spray 3.00 kg per sqm by paint brush over cleaned surface for 8-10mm Thick ready mix plaster in for ceiling on brick wall or concrete surfaces including making groove of appropriate size and finished even & smooth without using extra cement including three coat of white wash, complete all as specified and directed. Name of Manufacturer: M/s ACC acopalst / CK Birla Aerocon / M/s Ultratech Cement Ltd or other approved equivalent make. |
| 16 | M&L for preparation of old surfaces of walls and applying two coats of oil based distemper over a coat of birla putty (avg 2 mm thick), complete all as specified and directed. |
| 17 | Material and labour in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc second class hardwood weather boarding , clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps in any situation including scaffoldings of any height, complete all as specified and directed. |
| 18 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm in widht or girth and applying two coats of synthetic enamel paint over a coat red oxide, complete all as specified and directed. |
| 19 | Complete removal of old existing polish of doors/windows by using blow lamp or by grinder and applying French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler one or more coats of best quality, complete all as specified and directed. |
| 20 | S&F in repair decorative beading of 1st class hardwood of any size use for fixing of glass panes of doors and windows, complete all as specified and directed. |
| 21 | M&L anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron, complete all as specified and directed. |
| 22 | Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentration for post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor, complete all as specified and directed. |
| 23 | Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 24 | Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same, complete all as specified and directed. Please Enable Macros to View BoQ information |
