|
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., complete all as specified and as directed. |
| 2 | M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and directed. |
| 3 | M &L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour as approved by AGE(I) having tensile strength of 550 Mpa as in ridges,valley complete all as specified and as directed. |
| 4 | Refixing only galvanised corrugated mild steel sheeting as obtained from dismantling of old sheets here in before with two corrugation side lap, fixed with & including 'L' type or 'J' type or cranked hook bolts in roof covering, wall cladding etc complete all as specified and as directed. |
| 5 | Refixing only plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (measured as the minimum rectangle from which the piece can be cut) complete all as specified and as directed. |
| 6 | Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 7 | M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and as directed. |
| 8 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 9 | M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as \\"Supply only\\". |
| 10 | Supply only integral water proofing compound complete all as specified and as directed. |
| 11 | M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 12 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed. |
| 13 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 14 | M&L for preparation of old plastered surface of walls and applying one coat of cement base paint complete all as specified and as directed. |
| 15 | M&L for preparation of old plastered surface of walls and applying one coat of oil bound distemper complete all as specified and as directed. |
| 16 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thick ( Below or above ground) complete all as specified and directed. |
| 17 | M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of 3:1, complete all as specified and directed. |
| 18 | Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as directed. |
| 19 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 20 | M&L for glazed light coloured/printed ceramic tiles 300x200x7mm thick in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 21 | M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed. |
| 22 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends, complete all as specified and directed. |
| 23 | Taking down chowkats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm complete all as specified and directed. |
| 24 | Taking down shutters of any description exc 1 sq.m and n exc 2 sq. m each complete all as specified and as directed. |
| 25 | S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed. |
| 26 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2020 complete all as specified and directed. |
| 27 | S&F Factory made 30mm thick flush shutter solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 28 | S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 29 | M&L for 2nd class hardwood plain fillets bullnosed splayed, chamfered or rounded on one edge or face area exc 3Sqcm and n exc 6Sqcm including dismantling of old fillet complete all as specified and as directed. |
| 30 | S & F 100 mm size butt hinges, heavy weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 31 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 32 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 33 | S&F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. |
| 34 | M&L for weather boarding, 2nd class hard wood clean sawn, plain, 20 mm thick feather edged 15 mm to 20 mm thick and fixed with 30 mm laps and repairs to replace old or decayed boarding includind taking out old one complete all as specified and as directed. |
| 35 | M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed. |
| 36 | M&L for preparation of new wood or wood based surface of any description not exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed. |
| 37 | M&L for Preparing new zinc (or galvanised) surfaces to recieve painting , by coating with two coat of synthetic enamel paint over a coat of red oxided zinc chorome primer complete all as specified and as directed. |
| 38 | M&L for preparation of old painted steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints complete all as specified and as directed. |
| 39 | M & L for writing letters or figures with approved paint (Block, Roman, Italic or Indian) not exc. 30 cm high complete all as specified and as directed. |
| 40 | S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking out old tube of any description complete all as specified and as directed. |
| 41 | S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking out old tube of any description complete all as specified and as directed. |
| 42 | S & F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed. |
| 43 | S & F in repairs, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 44 | S&F in repairs, 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thck AC board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 45 | S&F in repairs, Towel Rail 20mm dia D type, 600mm long of cromium plated fixed with and including Chromium plated brass screws complete all as specified and as directe. |
| 46 | S & F in repairs, Vitreous China Squatting Pan\\"Orissa pattern\\" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed. |
| 47 | S & F in repairs,10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets, 15mm dia PVC connection pipe etc complete all as specified and as directed. |
| 48 | S & F in repairs, vitreous china half stall urinal, white with grating and union for discharge pipe, 15mm dia PVC connection pipe and urinal preader of PTMT any colour for fixing with 15mm dia pipe (minium weight 60grams), 32mm waste coupling of PTMT(half or full threaded) (minium weight 32-45grams) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc. complete all as specified and as directed. |
| 49 | S&F in repairs, brass chromium plated shower rose 125mm size with arm complete all as specified and as directed |
| 50 | S&F in repairs, bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 51 | S&F in repairs, concealed stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed. |
| 52 | S&F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed. |
| 53 | S & F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor, including taking down old pipe of any description complete all as specified and as directed. |
| 54 | S & F 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor, including taking down old pipe of any description complete all as specified and as directed. |
| 55 | S&F 110mm PVC (SWR) WC connector with lip ring, complete all as specified and as directed. |
| 56 | S&F 110 mm dia PVC (SWR) PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed |
| 57 | S&F 110 mm dia PVC (SWR) reducer, complete all as specified and as directed |
| 58 | S&F 110 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed |
| 59 | S&F 75 mm dia PVC (SWR) bends with access door any radius complete all as specified and as direct |
| 60 | S&F in repairs, 75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 61 | S&F in repairs, PVC connections 15mm size with PTMT nuts of length 400mm complete all as specified and as directed. |
| 62 | S&F stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 50mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 63 | M&L concrete bed 1:2:4, type B2 (using 40 mm graded crushed stone aggregates) for drain pipes 110 bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 64 | Taking down carefully any type of point wiring (light, fan, bell, socket or power), complete excluding fittings but including switches, ceiling roses, pendants, regulators, sockets, etc. and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and as directed. |
| 65 | M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FR-LSH cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly) laid/fixed with and including PVC Casing and Caping on walls/ceiling, and with PVC switch board for mounting switches/socket etc for one light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and as directed. |
| 66 | All as per item serial No 65 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable and earth continuity wire with 2.5 Sqmm cable for 6 pin 15 Amp socket outlet on independent board. |
| 67 | All as per item serial No 65 here-in-before but for One 3 pin 5 Amp socket on same board. |
| 68 | S & F switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed. |
| 69 | S & F switch piano, flush type single pole one way 15 Amps 230 volt complete all as specified and as directed. |
| 70 | S & F switch socket outlet, 2 in 1, 5 pin, 5 Amp flush type complete all as specified and as directed. |
| 71 | S & F switch socket combination, multipurpose, 2 in 1, 5 pin, 5 & 16 Amp flush type complete all as specified and as directed. |
| 72 | S&F in repairs, LED light fitting 1 x 9W / 1 x 10W blukhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 73 | S & F ceiling rose surface bakelite, 65x50mm three terminal complete all as specified and as directed. |
| 74 | S & F lamp holder, insulated, PVC / polycarbonate /bakelite body cord grip cap suitable for pendent fitting complete all as specified and as directed. |
| 75 | S & F Lumino LED lamps 10W E27W ball lamp lumen output 1020lm 3000K colour temp current 0.55 amps complete all as specified and as directed. |
| 76 | S & F MAXOLED batten with Maxo LED type 20W LED 6000K T8 LED lighting fixture with extruded polycabonate, environment friendly, energy efficient, 230V, 50Hz complete all as specified and as directed. |
| 77 | S&Fin repair PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and as directed. |
| 78 | S & F in repairs, single pole & neutral DBs 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as specified and as directed. |
| 79 | S&F MCBs, SPN/DP 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. |
| 80 | S&F MCBs, SP 6 to 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. |
| 81 | S&F 1100 volts grade heavy duty flat cable of size 10 Sqmm 2 core, PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including replacing 4mm suspension wire including taking down old cable of any descrip[tion complete all as specified and as directed. |
| 82 | M&L for house service GI bracket(Hook type) made out of 40 mm bore medium grade GI Pipe of length 3m and one No 90 degree bend fixing with clamps, nuts and bolts, MS hooks,stay etc, including dismantling old one complete all as specified and as directed. |
| 83 | M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrode at one end and connected to main switch board/ DBs etc. at the other, earth strip encased(protected) in and including 15 mm bore GI pipe medium grade with all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work complete all as specified and shown in electrical plate No 3 of SSR Pt-I and including taking down of old ones, complete all as specified and directed. |
| 84 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cables, foundation for pole, etc and getting out in hard/dense soil complete all as specified and as directed. |
| 85 | Returning, filling in, including spreading, levelling, watering and well ramming of soil in layers n. exc 25cm thick complete all as specified and as directed. |
| 86 | Removing excavated soil to distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and as directed. |
| 87 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to requirred thickness complete all as specified and as directed. (Note: Thickness of sand cushioning after punning down shall be measured for payment purpose) |
| 88 | Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed. |
| 89 | M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 2.0 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed. |
| 90 | Supply, Installation, testing and commissioning of Hot Dip Galvanised Tapered Octagonal Pole of Pole Height 5.00 m and having dimensions of 130 mm [Across the Face] at Bottom and 70 mm [Across the Face] at Top, made of 3mm thick BSEN-10025-S355JO Grade Steel Plate for Shaft and having Base Plate of size 200 X 200 X 12 mm thick with 4 Nos Φ16mm Holes with Pitch Circle Diameter of 250mm, conforming to IS - 2062, with Door Opening, Fixed with 4 Nos of M16X450mm long J Bolts of EN8 Grade with 3 Nuts and One Washer including 0.50m Long Sword type Decorative Single Arm Brackets made up of 40mm dia Medium Grade GI Tube conforming to IS - 1239 suitable for fixing LED Street Light Fittings including all accessories as per IS or OEM complete all as specified and as directed. Note : Unit rate quoted against this item shall deemed to be inclusive of the following :-(a) Foundation bolts manufactured from special steel along with nuts, washers, anchor plates & templates complete set as per OEM.(b) Construction of foundation of pole as per manufacturer's instruction. mix of RCC for foundation as recommended by OEM shall be done by contractor from lab asspecified in particular specification however nothing extra shall be paid to contractor on this account.(d) Drawing of Hot Dip Galvanised Tapered Octagonal Pole along with foundation details shall be submitted by contractor to department for approval before construction.(e) Necessary earth work, excavation,PCC, RCC for foundation including formwork and reinforcement for Pole shall be deemed to inclusive of qouted rate.Note : The LED street light for this item will measured and paid separately under relevant item. |
| 91 | S &F street light fitting of 35 Watt LED made of pressure die cast aluminium housing with toughned glass and LEDs with secondary optics and IP 66 protection and lens embedded PC Cover having top opening seperate driver compartment ,should have luminaire efficacy ≥110 lumens/watt,CRI>70 ,PF > 0.95,CCT≥5500,IP66,impact resistance IK 07 ,inbuilt protection against lightning , over voltage , short circuit and surge/spike protection device upto 5 kVcomplete also tested for 440 Volt for 8 hour Phase to phase without any damage including suitable size of mounting bracket and connecting up complete all as specified and as directed.Note:Contractor have to write date of changing in bold letter using permanent marker and submit minimum two years manufacturer warrantee certificate with purchase voucher on completion of work. Please Enable Macros to View BoQ information |
