|
| 1 | M&L for preparation of new plastered surfaces of wall including cornices plasters and applying two coats of oil bound distemper over a coat of primer on wall, complete all as specified and directed. |
| 2 | Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and directed |
| 3 | M&L for preparation of old painted steel surface of any description exc 10cm width or girth and applying two coats of fire resisting silicate enamel paint complete all as specified and directed. |
| 4 | M&L for Preparing the new steel surfaces of any description over 10cm width or girth priming with red oxide zinc chrome and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 5 | M&L for mild steel work Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 6 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound of grade 'A' complete all as specified and directed. |
| 7 | Dismantling framed trusses span n exc 10m complete all as specified and directed. |
| 8 | Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water complete all as specified and directed. |
| 9 | M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even & smooth without using extra cement including scaffolding upto 7 meter height and curing the surface, complete all as specified and directed. |
| 10 | M&L for Rendering 10mm thick in cement mortar 1:6 other than on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including scaffolding at any height and curing the surface, complete all as specified and directed. |
| 11 | M&L for Rendering 5mm thick in cement mortar 1:3 on concrete surfaces ceiling/ top and sides of chajjas/ facia of roof projection including necessary formwork upto 7 meter including height finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L for Chicken wire mesh fixed in postion with necessary arrangements on roof projections, chajjas, facia and similar items upto 8m height, complete all as specified and directed. |
| 13 | Preparation of new plastered surfaces of walls and M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/L and UV resistance as per IS 15489:2004 alkali and fungal resistance, dust resistance, water repellant, crack-bridging, weather proof 1st quality exterior paint of approved camouflange pattern with required shades (Company Depot Tinted) with silicon additives @ 1.43 L/10 Sqm and including priming coat of exterior primer applied @ 0.90L/10 Sqm and repairing patches with putty and scaffolding at any height complete all as specified and directed by Engr-in-Charge. Note : - Tint/ shade shall be approved by Engr-in-Charge. |
| 14 | M & L for 100mm thick Cement Concrete 1:2:4, type B-2 using 40mm graded crushed stone aggregate as in flooring/hardstanding complete all as specified and as directed. |
| 15 | S&F Expanded metal, cut to length, bent to shape required and n exc 4 kg per sqm tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members. |
| 16 | M&L for Providing cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in landings, Parapet walls, facia, cover, slabs upon drainage system, set in cement mortar 1:6 incl necessary form work etc, complete all as specified and directed. |
| 17 | M&L for 75mm thick PCC, type C-2, 1:3:6, (using 40mm graded crushed stone aggregate) as in plinth protection and similar works uncluding finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for of Washing, rubbing down and stopping of distempered and painted surfaces of ceiling with two coats of Oil Bound Distemper over a coat of primer to complete all as specified and directed. |
| 19 | M&L for liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster). |
| 20 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 21 | M&L Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws and overlap with sufficient laps, complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L for providing, cement concrete 1:2:4 type B-0, (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 23 | M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 24 | S&F air termination at any height, single pointed, aluminium rod 12 mm dia and 300 mm long to be screwed and sturdily fixed on strip including all connected items for staible connection all as specified and directed by Engr-in-Charge. |
| 25 | S & F Aluminium strip 25 x 3.15 mm laid on surface of roof or compact earth surface of , fixing on insulator with required spacing with screws, etc for roof and down conductors above ground level complete all as specified. |
| 26 | S & F GI strip 32 mm x 6 mm buried in ground connecting at ends, jointing etc complete all as specified. Please Enable Macros to View BoQ information |
| 27 | S & F GI strip 32 mm x 6 mm buried in ground connecting at ends, jointing etc complete all as specified. Please Enable Macros to View BoQ information |
