|
| 1 | Taking down carefully copper/aluminium point wiring of any type, (Light, Fan, Socket or power) complete incl fittings and making good the disturbed surfaces of walls, ceiling etc in cm and applying two coats of white/colour washing/distempering etc to match the existing surface complete all as directed by Engineer - in- Charge. |
| 2 | Taking down unserviceable main switch, DBs with MCBs any size and capacity including making good disturbed surface of wall complete all as specified and directed. |
| 3 | Taking down unserviceable sub main wiring size and complete incl fittings and making good the disturbed surfaces of walls and applying two coats of white/colour washing/distempering etc to match the existing surface complete all as directed by Engineer - in- Charge. |
| 4 | Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, Fire Retardant conforming to IS 694-1990 PVC insulated, unsheathed copper conductor cable FRLS in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings. |
| 5 | All as per item No 4 here -in- before but one light point controlled by one, one way switch 05 / 06 Amps. |
| 6 | All as per item No 4 here -in- before but one ceiling fan /exhaust fan point controlled by one, one way switch 05 / 06 Amps. |
| 7 | All as per item No 4 here -in- before but one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. |
| 8 | All as per item No 4 here -in- before but one 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. |
| 9 | All as per item No-4 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board. |
| 10 | Supply & fixing switch piano flush type, 05/06 Amps single pole , one way 240 volts complete all as specified.. |
| 11 | Supply & fixing of bell push, flush type 05/06 Amps, 240 volts complete all as specified. |
| 12 | Supply & fixing bell, AC, 230 volts, single pole, ding dong type size compete all as specified. |
| 13 | Supply & fixing switch piano flush type, 15 /16 Amps single pole, one way 240 volts complete all as specified . |
| 14 | Supply & fixing socket outlet 3 pin, 05/06 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified. |
| 15 | Supply & fixing of socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified and directed. |
| 16 | Supply & fixing ceiling fan regulator, rotary 0 to 04 steps, upto 60 W, AC, 230 volts, suitable for ceiling fan as per site complete all as specified and directed. |
| 17 | Supply & fixing lamp holder (Angular/Straight), insulated body, complete all as specified and directed. |
| 18 | Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified and directed. |
| 19 | Supply only decorative LED Tube light fitting 1x20 Watt , with opal diffuser, environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No, complete with all accessories and fixing material all as specified and directed. |
| 20 | Supply and fixing LED light 12 watt square/Round type of size 150x 150mm, surface/ ceiling mounted downlight panel made of aluminium PDC housing for indoor application with high aesthetic appeal for uniform light complete all as specified and directed . |
| 21 | Supply and fixing all in one solar streetlight 25 W having compact and fully integrated design with intelligent features includes a built in solar panel, lithium ferro phosphate (LiFePO4) Battery, charger controller and motion sensor including foundation/PCC complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. |
| 23 | M & L for repair/replacement sub main wiring with 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi stranded, Fire Retardant conforming to IS 694-1990, PVC insulated, unsheathed, copper conductor stranded cable FRLS with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core , including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x4 sq mm wire and one 4.0 sq mm earth shall be measured as one unit length. |
| 24 | Material and labour for repair/replacement sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length. |
| 25 | Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed |
| 26 | Supply and fixing sheet metal enclosure double door, triple pole and neutral (TP&N), AC 240 volts, 4 way, with 200 Amps rated copper bus bar and IP-43 protection with metal door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed. |
| 27 | Supply & fixing MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed. |
| 28 | Supply & fixing MCB DB Box 4 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed. |
| 29 | Supply & fixing MCB DB Box 12 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed . |
| 30 | Supply & fixing MCB, TPN, 415 volts of 100 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed |
| 31 | Supply & fixing MCB , SP, AC, 240 volts of 05 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 32 | Supply & fixing MCB, SPN, AC, 240 volts of 40 to 63 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 33 | Supply and fix bollard/garden light of 10W IP66 along with pole with minimum hight 60cm including all connection wire,switch,socket etc complete all as specified and directed |
| 34 | Taking out old unsv LT cable any size and Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed |
| 35 | Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed. |
| 36 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and gating out in soft / loose soil complete all as specified and directed. |
| 37 | M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed by Engr-in-Charge. |
| 38 | Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed. |
| 39 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and directed. |
| 40 | Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed. |
| 41 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete.Note:- (i) If the desired earth resistance is not found within permissible limit, shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia GI pipe medium grade upto 7.5 m is included in the rate quoted for this item. Please Enable Macros to View BoQ information |
