|
| 1 | Demolition of brick work or stone masonry/stone slabs built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed. |
| 2 | Material and labour for brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified. |
| 3 | Taking down cement plaster, from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material, outside of A 1 defence land complete all as specified and directed. |
| 4 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth, complete all as specified and as directed. |
| 5 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth, complete all as specified and as directed. |
| 6 | Material and labour for preparation of newly plastered surface of internal wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint complete all as specified and directed. |
| 7 | Material and labour for two coats of cement based paint over a coat of cement based primer to newly plastered surfaces including preparation of surfaces complete all as specified and directed. |
| 8 | Material and labour for white washing three coats on wall including preparation of newly plastered surfaces complete all as specified and directed. |
| 9 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from MoD all as specified and directed. |
| 10 | Material and labour for joint free non- skid coloured ceramic tiles of any design and pattern, 400X400X7 to 8 mm thick, tiles in floor etc incl 15 mm thick screed bed in CM 1:4 , set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed. |
| 11 | Material and labour for joint free coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8 mm thick, as in dado etc incl 10 mm thick rendering in CM 1:3, Set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white of coloured cement to match the shade of the tiles complete all as specified and directed. |
| 12 | Material and labour for coloured vitrified light shade tiles of any design and pattern, 600x600x9 to10 mm thick, as in floor etc incl 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed |
| 13 | Description all as per item No 12 above but as in skirting/dado over 10mm thick cement plaster in CM 1:3. complete all as specified and directed. |
| 14 | Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) and including removing unserviceable material,outside of A 1 defence land complete all as specified and directed. |
| 15 | Material and labour cement concrete 1:3:6 type C-1 (using 40mm graded aggregate) 75 mm thick as in sub bases of floor complete all as specified and directed. |
| 16 | Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.50 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided. |
| 17 | Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in floor complete all as specified and directed. |
| 18 | Material and labour for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 19 | Material and labour for cement concrete type B1, 1:2:4 (00mm graded stone aggregate) for surface channels and drains complete all as specified and directed. |
| 20 | Material and labour of 15-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 15 mm thick screed bed in cement mortar 1:6 including full round bull nosing complete all as specified and directed. |
| 21 | Material and labour for heavy duty parking tiles of size 300x300mm and thickness 12mm as in floor over and including 15mm thick screed bed in cement mortar (1:6), set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match complete all as specifed and directed. |
| 22 | Material and labour polished rubber moulded coloured machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming IS 15658-2006 of 60mm thickness, M-35 grade laid over and including 25mm thick sand cushioning complete all as specified and directed. |
| 23 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each.Complete all as specified and directed |
| 24 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each.Complete all as specified and directed |
| 25 | Taking down door shutters of size exc 1 Sqm and n exc 2 sqm removing from site complete all as specified and directed. |
| 26 | Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 105x60 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termiteproof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed. |
| 27 | Supply and fixing 30 mm thick WPC factory made 100% solid flush door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed. |
| 28 | Supply and fix for stainless steel Butt Hinges medium weight,100 mm fixed to steel/wooden shutters complete all as specified and directed. |
| 29 | Supply and fix for stainless steel barrel tower bolts 200 mm size, with bright bolt, complete all as specified and directed. |
| 30 | Supply and fix for stainless steel handles 150 mm size complete fixed complete all as specified and directed. |
| 31 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified and directed. |
| 32 | Supply and fixing of 18 mm thick PVC board one side prelaminated, density 600 and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed. |
| 33 | Supply and fixing of 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, salvent cement/ adhessive , complete all as per specifications and directed. |
| 34 | Supply and fix magnetic catcher and striking plate including letting in and fixed complete all as specified and directed. |
| 35 | Supply and fix continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed. |
| 36 | Supply and fix D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified and directed. |
| 37 | Resecuring or easing and adjusting without taking down shutters of any description and type exc 1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 38 | Supply and fix in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum), complete all as specified and directed. |
| 39 | Repair to aluminium window of any size by replacing worn out hinges or worn out portion such as glazing bars, fitting and fixture positioning of shutters etc. and cleaning the window surrounding and renewal of fitting and fixture (unserviceable) complete all as specified and directed. |
| 40 | Supply and fix for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square/rectangular shape in each pane including hacking out of old glass, complete all as specified and directed. |
| 41 | Supply and fix for 4 mm thick frosted sheet glass ordinary quality and glazing with oil putty or wooden beads in square/rectangular shape in each pane including hacking out of old glass,complete all as specified and directed. |
| 42 | Supply and fixing of aluminum powder coated fixed/openable shutters/partition type windows including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 60mmx40mmx1.50mmPanel :- 4mm thick ACP sheet / 4mm thick tinted/frosted glass of approved colour and design |
| 43 | Supply and fixing of aluminum anodized powder coated door shutter with frames of size - 40x45x1.5 mm incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable handle, tower bolt, SS butt hinges,mortice lock 4 lever with 65 mm latch size including aluminium anodized door frame of size 60x 40 x1.5 mm thick fixed to wall with necessary screws and plug complete all as specified & directed. (rates for one no hydraulic door closer per shutter & 4 mm thick tinted glass /4mm thick ACP sheet reqd to be fitted in shutters is included in the item ) |
| 44 | Material and labour for providing & fixing false ceiling of Designer tile (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600mm and secondary cross \\"T\\" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width including dismantling of old false ceiling including fillets etc complete all as specified and directed. |
| 45 | Supply and fix in repair for 15 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor including taking down of old unserviceable pipes, complete all as specified and directed. |
| 46 | Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed. |
| 47 | Supply and fix in repair for 20 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor including taking down of old unserviceable pipes, complete all as specified and directed. |
| 48 | Supply and fix 110 mm bore PVC (SWR) Soil, waste and vent pipes, ( ISI Marked), single socketed in any length with rubber ring joints laid in trenches or in floors/walls complete including dismantling existing pipr etc complete all as specified and directed. |
| 49 | Supply and fix 75 mm bore PVC (SWR) Soil, waste and vent pipes ( ISI Marked), single socketed in any length with rubber ring joints laid in trenches or in floors complete including dismantling existing pipr etc complete all as specified and directed. |
| 50 | Supply and fix 75 mm bore PVC (SWR) Multi floor trap including jointing with solvent cement ( ISI Marked) . complete all as specified and directed. |
| 51 | Supply and fix PVC bend any radius 110mm bore with access door complete all as specified and directed. |
| 52 | Supply and fix PVC bend any radius 75mm bore with access door complete all as specified and directed. |
| 53 | Supply and fixing in repair of PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 8-10 litres capacity complete all as specified and directed |
| 54 | Supply and fixing in repair of Vitreous China wash basin, white, flat back, size 550x450mm excluding taps, waste, chain and plug and porcelain stopper but including waste coupling of PTMT (min weight 32mm-45gms cutting for pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 55 | Supply and fix in repair vitreous china wash down water closet pan pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete complete all as specified and directed. |
| 56 | Supply and fix vitreous china table top/countersunk WHB size 640x400x120mm excluding taps, waste, chain and plug and procelin stopper complete all as specified and directed |
| 57 | Supply and fix in repair vitreous china wash down water closet pan single piece (pedestal pattern) size 365 x 655 x 760mm UF soft close seat cover fixing accessaries set and accessaries set cistern fittings and S trap 220mm complete all as specified and directed |
| 58 | Supply and fix in repair 15mm dia chromium plated fancy type central hole wash hand basin mixer suitable for countersunk/tabletop WHB screwed down high pressure screwed for iron pipe completed all as specified and directed. |
| 59 | Supply & fix in repair fancy type wall mixer with over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15 mm bore pipes complete all as specified and directed . |
| 60 | Supply and fixing in repair of angle stop valve cast copper alloy screwed down high presure screwed both end for iron pipe 15 mm dia fancy type cromium plated (ISI Marked) complete all as specified and directed. |
| 61 | Supply and fix in repair brass CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed. |
| 62 | Supply and fix in repair health faucet fancy type (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections fixed in position complete in all respect as specified and directed. |
| 63 | Supply and fixing in repair 15 mm bore Pillar cocks chromium plated brass with capstain head screwed down high pressure complete all as specified and directed. |
| 64 | Supply and fixing in repair fancy type bevelled edge mirror of selected quality glass of size n.exc 1.00 Sqm, brass screws/fastner and cup washers complete all as specified and directed. |
| 65 | Supply and fixing in repair of fancy type CP shower rose with or without swivel joints of 125 mm size with shower arm including fixing to steel pipe or union complete all as specified and directed |
| 66 | Supply and fix in repair CP Grating doom 125mm dia with/without waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified and directed. |
| 67 | Supply and fixing in repair of PVC connection 15mm size with PTMT nut at both ends with washer, 450mm long and fixed complete all as specified and directed. |
| 68 | Supply and fixing in repair of CP toilet paper holder with flat recessed type stainless steel fixed to wall with CP brass screw complete all as specified and directed. |
| 69 | Supply and fixing in repair of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long incl aluminium alloy bracket and guard rail complete all as specified and directed . |
| 70 | Supply and fixing in corner self 300mm radius of 10mm thick toughened glass with CP railing with bracket Supply and fixixed with brass screw complete all as specified and directed. |
| 71 | Supply and fixing in repair of cast copper alloy, chromium plated Towel Rail 20 mm dia, D-type, 600 mm long fixed with and including Chromimum plated brass screws and wooden plastic cleats complete all as specified and directed . |
| 72 | Supply and fix in repair for CP Brass Towel ring of standard quality complete all as specified and directed. |
| 73 | Supply and fixing in repair of PVC water storage tank cylindrical,triple layer vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet and 20mm tank nipple (min weight 45gm) suitable for HDPE water tank including dismantle of old water tank and removing from site. complete all as specified and directed. |
| 74 | Dismantling asbestos cement/ galvanium aluminium (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 75 | Supply and fixing of pre- painted galvanium aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and as directed. |
| 76 | Dimantling timber scantling as in unframed work as in fillets, rails, posts, rafters, purlins, etc under 40sqcm in section etc complete all as specified and directed |
| 77 | Supply and fixing of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W (Gde E-250) quality-A complete all as specified and directed |
| 78 | Material and labour for preparation of new steel surfaces of any description over 10cm width & girth not otherwise described and applying two coat of synthetic enamel paint (Ist quality)over a coat of red oxid primer complete all as specified and directed |
| 79 | Material and labour for complete removal of existing treatment to wall and applying one coat of wall putty not less than 1mm thick (internal or external ) on walls internal or external surfaces in any height complete all as specified and directed. |
| 80 | Material and labour for applying two coats of oil bound distemper on internal wall putty surfaces complete all as specified and directed. |
| 81 | Material and labour for preparation of old surface of wall and applying two coats of cement based paint of finish wall surface even and smooth, complete all as specified and directed. |
| 82 | Material and labour for preparation of old plastered/ treated surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed. |
| 83 | Material and labour for preparation of old decorated surfaces of wood and wood based materials, wooden, plastered, concrete surfaces of any descriptions not otherwise described over 10Cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 84 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. |
| 85 | Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified and directed. |
| 86 | Dismantling and taking down carefully existing DB’sx including MCB/MCCBs/MCB Box any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified and directed.. |
| 87 | Taking down the existing Energy meters carefully and proper noted down the qtr No Meter No and reading with date and kept in safe custody & refixing electric meters SP upto 40 Amp at site including making electric connections complete with existing system all as directed. |
| 88 | Taking down and refixing ceiling fans any sweep and replace flexible three core copper wire 0.5 Sqmm from ceiling rose to fan incl cleaning & testing complete all as specified and directed. |
| 89 | Taking down and refixing Exhaust fans any sweep and refixing the same at directed place incl incl cleaning & testing complete,making electric connections complete with existing system complete all as specified and directed. |
| 90 | Taking down Geyser from roof /wall and refixing the same at directed place incl incl cleaning & testing complete,making electric connections complete with existing system all as directed. |
| 91 | Taking down air conditioner from roof /wall and refixing the same at directed place incl incl cleaning & testing complete,making electric connections complete with existing system complete all as specified and directed. Please Enable Macros to View BoQ information |
| 92 | Taking down air conditioner from roof /wall and refixing the same at directed place incl incl cleaning & testing complete,making electric connections complete with existing system complete all as specified and directed. Please Enable Macros to View BoQ information |
