|
| 1 | Taking down cement plaster hacking for key, raking out joints of old brick work built in cement mortar and scrubbing down with water etc. to receive plaster complete all as specified and directed. |
| 2 | Removing old lime wash (if any,) hacking for key, raking out joints of old brick work or stone work built in lime or mud mortar; not previously plastered made of lime or cement mortar; and scrubbing down with water etc. to receive plaster complete all as specified and directed. |
| 3 | M&L for rendering 15 mm thick plaster in two layers (5 mm thick in CM 1:4 mixed with WPC @ 200 ml/ bag of cementover 10 mm thick in cement mortar 1:6) on brick or concrete surfaces, finished even and smooth without using extra cement upto a height of 7 meters from GL complete all as specified and directed. |
| 4 | M&L for rendering 10 mm thick plaster in cement mortar (1:6) on brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for rendering 5 mm thick plaster in cement mortar (1:3) on ceiling surfaces and finished even and smooth without using extra cement & preparation of newly plastered surface and applying three coats of white wash complete all as specified and directed. |
| 6 | M&L for preparation of old decorated surfaces of ceiling of any description by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed. |
| 7 | M&L for complete removal of existing treatment preparation of surfaces, making the surface smooth by applying 1.00 mm thick cement based wall care putty and applying two coats of oil bound distemper complete all as specified |
| 8 | M&L for preparation of old decorated surfaces of walls of any description by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a layer of 2 mm thick cement based wall care putty to make surface smooth complete all as specified and directed. |
| 10 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 11 | M&L for preparation of newly plastered surfaces and finishing walls/facia with Acrylic Smooth exterior paint of required shade as approved: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall/facia surfaces complete all as specified and directed. |
| 12 | S&F False ceiling of 8 to 9 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid / Cross-T / Wall angle/level clip & suspenders / Hangers 4 mm dia. G.I. wire (upto1200mm length) adjusting level fixed to roof slabes/trusses complete all as specified standard galvanised sections in a grid size of 600x600mm including taking down existing ceiling board & grid work etc of any type / pattern complete all as specified and directed. |
| 13 | S&F in repairs Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 15 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (joint free) , area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement, laid. over and including screed bed or bedding layers of mortars 15 mm thick in CM 1:4 complete all as specified and directed |
| 16 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (joint free), area of each tile exc. 0.11 sqm and n. exc. 0.16 sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including screed bed or bedding layers of mortars 15 mm thick in CM 1:4 fcomplete all as specified and directed |
| 17 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick, (joint free), area of each tile exc. 0.11 sqm and n. exc. 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement. over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 18 | M&L for glazed ceramic coloured tiles 450x300x7mm thick, in vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in CM (1:4) complete all as specified & directed. |
| 19 | Taking down chowkats or frames exc 1.5 sqm but n exc 4 sq.m with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 20 | Taking down chowkats or frames n. exc 1.5 sqm but with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 21 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 22 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 50 x 125 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 23 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 24 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 25 | S&F 35 mm thick factory made wire guazed and skeleton shutters, 2nd class hardwood, open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth, etc.; sizes of members of shutters as specified in fitted to chowkats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed |
| 26 | M&L for preparation of old painted surfaces of iron or steel of any discription exc 10cm width or girth and providing one coat of synthetic enamel paint complete all as specified and directed. |
| 27 | M&L for MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 incl taking down one one all as specified and directed |
| 28 | M&L for 3 mm sheet glass (for windows) , ordinary quality in square or rectangle n. exc 0.5 sqm each pane fixed to framed work complete all as specified and directed. |
| 29 | M&L for 3 mm Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed to aluminium framed work (venilators) complete all as specified and directed. |
| 30 | S&F Stainnless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wirre staples or rubber/all beads complete all as specified and directed. |
| 31 | S&F 150 mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 32 | S&F 150 mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed. |
| 33 | S&F 100 mm long Butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 34 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 35 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 36 | S&F floor door stopper of overall length of cover plate 150mm alluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 37 | S&F stainless steel peg set of six 480 mm x 30 mm x 4 mm size, fixed with machine screws & rowal plug complete all as spcified and directed. |
| 38 | S&F in repair Bib taps with flange for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed complete all as specified and directed. |
| 39 | S&F in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 40 | S&F in repair Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 41 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with 20 mm dia pipe complete all as specified and directed. |
| 42 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with 15 mm dia pipe complete all as specified and directed. |
| 43 | S&F in repair Brass CP mixer suitable and fixed to 15 mm bore iron pipe, for mixing hot & cold water and fixed with aerator complete all as specified and directed. |
| 44 | S&F in repair 400x500 mm cabinet, mirror of selected quality 5 mm thick glass with PVC storage cabinets fixed with chromium plated brass screws and cup washers with PVC beading incl dismantling of old mirror complete all as specified and directed. |
| 45 | S&F in repair towel rail brass, chromium plated, 600 mm long complete all as specified and directed. |
| 46 | S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 47 | S&F in repairs Vitreous china wash basin of size 550x400mm, white flat back, including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread, complete all as specified and directed |
| 48 | S&F in repair 15mm bore CP pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified & directed. |
| 49 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl Supply and fixing of PVC seat and cover for pedestal pan complete all as specified and as directed. |
| 50 | S&F in repairs Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed. |
| 51 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 52 | S&F in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified. |
| 53 | S&F in repair Stainless steel Grating doom 100mm dia with waste hole cfixed in floors complete all as specified and directed. |
| 54 | S&F in repair Stainless steel Grating doom 100mm dia fixed in floors complete all as specified and directed. |
| 55 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 56 | M&L for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified |
| 57 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 58 | S&F in repair PVC corner shelf assembly consisting fixing with chromium plated brackets guard complete all as specified. |
| 59 | S&F in repair Brass Chromium plated Soap Dish fixed with and incl CP screws all as specified and directed. |
| 60 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed. |
| 61 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 62 | M&L for preparing the new steel surfaces of any description over 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 63 | Demolition of brickwork or stone/ boulder masonry, built incement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 64 | M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed |
| 65 | Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 66 | S&F mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to FE 410W Gde E-250 quality A complete all as specified and directed. |
| 67 | Dismantling of cast iron or reinforced concrete drain pipes of dia 100 mm, jointed in cement mortar and taking out of trenches walls etc as directed |
| 68 | Dismantling of cast iron or reinforced concrete drain pipes of dia 75 mm, jointed in cement mortar and taking out of trenches walls etc as directed |
| 69 | Dismantling of cast iron or reinforced concrete drain pipes of dia 50 mm, jointed in cement mortar and taking out of trenches walls etc as directed |
| 70 | S&F 100 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors etc complete all as specified and directed. |
| 71 | S&F 100 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed on walls with clamps complete all as specified and directed. |
| 72 | S&F 100 mm dia sand cast CI bend with oval access door and jointed with neat cement paste complete all as specified and directed. |
| 73 | M&L 100 mm dia sand cast CI Bend and jointed with neat cement paste complete all as specified and directed. |
| 74 | S&F in reapirs Cast iron floor trap 100 mm bore of outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 75 | S&F in reapirs Cast iron floor trap 75 mm bore of outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 76 | S&F in repairs Cast iron gully/nahani trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 77 | S&F 75 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors etc complete all as specified and directed. |
| 78 | S&F 75 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed on walls with clamps complete all as specified and directed. |
| 79 | S&F 75 mm dia sand cast CI Bends with oval access door and jointed with neat cement paste complete all as specified and directed. |
| 80 | S&F 75 mm dia sand cast CI Bends jointed with neat cement paste complete all as specified and directed. |
| 81 | S&F CI Pipe 100mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) as in repair, or with parallel branches complete all as specified and directed. |
| 82 | S&F CI Pipe 75mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches as in repair complete all as specified and directed. |
| 83 | S&F cast iron cowls suitable for and fixted to 75 mm bore CI pipe complete all as specified and directed. |
| 84 | M&L 50 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed on walls with clamps complete all as specified and directed. |
| 85 | M&L 50 mm dia sand cast CI Bends with oval access door and jointed with neat cement paste complete all as specified and directed. |
| 86 | S&F in repair Stack clamps out of 50 mm by 5 mm flat and 16mm dia round iron strip and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe complete all as specified and directed. |
| 87 | S&F in repair Stack clamps out of 50 mm by 5 mm flat and 16mm dia round iron strip including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia CI pipe complete all as specified and directed. |
| 88 | S&F in repair Stack clamps out of 50 mm by 5 mm flat and 16mm dia round iron strip including bolts and nuts and securing ends of stays to wall or roof for 50 mm dia CI pipe complete all as specified and directed. |
| 89 | S&F Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float incl taking down existing water tank of any capacity complete all as specified & directed. |
| 90 | S&F in repair Tubes,15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 91 | S&F in repair Tubes 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 92 | S&F in repair 20 mm bore mild steel drapery rods with 1 mm thick Stainless steel including SS brackets and SS knobs fixing on windows and doors with rawl plugs for hanging curtains complete all as specified and directed. |
| 93 | M&L for cutting chases, cutting n.exc. 10cm girth, pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3 complete all as specified and directed. |
| 94 | M&L for Marble Green/Bhaisiana Zebra 18 to 20mm thick (table rubbed and premirror polished) in single piece in steps (tread and risers) and floor jointed in neat cement slurry including pointing in epoxy grout to match marble shade, laid over and including 15mm thick screed bed in CM 1:4 or 10 mm thick backing coat in vertical surfaces incl rounding edges and demoliition of existing stone slab of any type and description complete all as specified and directed |
| 95 | M&L of demolition of sunken floor upto surface of RCC Slab and rendering 15 mm thick cement plaster in 1:4 CM on floor and wall with intergral water proofing compound both on floor and wall incl application of epoxy resin coating, polymer modified cementation coating of fosroc or pedilite on floor for sunken floor or slab and filling the floor with PCC 1:3:6 above and PCC sub base to receive the tile complete all as specified and directed. Note : Water proofing compound shall be measured and paid for separately |
| 96 | M & L for APP modified roof treatment over existing accessible/non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) cleaning the top surface properly.(b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface.(c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane.(d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane. |
| 97 | Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level all as specified and directed. |
| 98 | M&L for 75mm thick PCC 1:4:8: type D-2 (using 40 mm graded aggregate) in floors as sub base, surface finished even and rough to receive subsequent finish all as specified and directed. |
| 99 | M&L for laying/spreading of sand as in cushion to precast concrete interlocking paver block incl watering & consolidating complete all as specified and directed. |
| 100 | M&L for Machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, jointed with grey cement and pigment complete all as specified and directed. |
| 101 | M&L for PCC 1:2:4 type B-2 using 40mm graded aggregate as in surface channels & drains complete all as specified and directed. |
| 102 | Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc. complete all as specified and directed. |
| 103 | Taking down copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, ceilling roses, holder, regulators, pendents, etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items shall be made as per conditions separately) and making good surfaces, wall, floors etc.) complete all as specified and directed. |
| 104 | M&L for point wiring with PVC insulated fire retardant low smoke multistranded copper conductor cable of 1.5 sqmm in and including PVC concealed non metallic conduit (ISI Marked) medium grade not less than 20 mm dia with all accessories and including pressed steel sunken terminal boxes (for mounting switches / regulators/socket /bell push etc ) made of not less than 16 gauge MS sheet and 6 cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 1.5 sqmm PVC insulated fire retardant low smoke multistranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall,making good the disturbed surfaces to match with the existing complete all as specified and directed. (Phase, Neutral and Earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note:- In ceiling Portion surface conduit wiring shall be carried out. |
| 105 | All as per description of Srl item No 104 here in before but for one light point controlled by two way switches 230 Volts. |
| 106 | All as per description of serial item No. 104 here-in-before but one 5 pin socket out let 5/6 Amps on same board with other switches. |
| 107 | All as per description of serial item No. 104 here-in-before but one 5 pin socket out let 5/6 Amps on independent board. |
| 108 | All as per description of serial item No. 104 here-in-before but for one 15 Amp independant socket outlet point using 2.5 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable |
| 109 | All as per description of serial item No. 104 here-in-before but for 2 in 1 15/16 amp multipurpose socket outlet/metal plug top with 4 sqmm FRLS cable PVC insulated unsheathed multistrand including 4 sqmm FRLS PVC insulated copper wire for earth continuity on independent board. |
| 110 | S&F in repairs modular switch, one module, 1 way, 10 Amps 240 volts complete all as specified and directed. |
| 111 | S&F in repairs modular switch, one module, 2 way, 10 Amps 240 volts complete all as specified and directed. |
| 112 | S&F in repairs modular socket 6A, 240 volts 2 & 3 pin, 2 Module complete all as specified and directed. |
| 113 | S&F in repairs modular switch, one module, 1 way, 16 Amps 240 volts complete all as specified and directed. |
| 114 | S&F in repairs modular step type fan regulator 120W, 240 volts, 2 Module, complete all as specified and directed. |
| 115 | S&F ceiling rose surface bakelite 65 x 50mm, three terminals ISI (Marked) complete all as specified and directed. |
| 116 | S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 117 | S&F in repair LED Lamp 9 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed. |
| 118 | S&F in repair 1x20 watt LED 6500K tube light fittings (4 feet long),Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed. |
| 119 | S&F in repairs LED light fittings mirror type with high out put diffuser 2 feet .10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 120 | S&F in repairs decorative wall light white in colour made up of poly carbonate including 9 watt retrofit LED Lamp complete all as specified and directed. |
| 121 | S&F in repairs LED Bulk Head luminaries 10W complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed. |
| 122 | S&F in repars building security LED light luminaire 30 W, IP 66, AC 230 volts,made up of pressure di cast iron housing complete making connection using PVC insulated and sheathed3 core multi stranded copper conductor cable of size 0.50 Sqmm from ceiling rose including suitabe size of bracket of light grade pipe for mounting of fitting along with clamps,nut bolts and washers all as specified and directed. |
| 123 | S&F in repairs sheet metal enclousers with single pole and neutral 240 volt, 20/32 Amps, C- Series with two pin and earth plug and socket plug top complete with single pole MCBs all as specified and directed. |
| 124 | S&F in repairs Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 8 way, 240 volts complete all as spd and directed. |
| 125 | S&F in repairs Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 12 way, 240 volts complete all as spd and directed. |
| 126 | Supply and fixing in replacement of MCB single pole and nuetral 63 Amps, 240 volts, B-series complete all as specified and directed. |
| 127 | Supply and fixing in replacement of MCB single pole 6 to 32 Amps, 240 volts, B-series complete all as specified and directed. |
| 128 | S&F in repairs sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRLS PVC sheathed two run (as phase and neutral) and run 6.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in rigid non metalic PVC conduit complete all as specified and directed.,(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting, chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plaster and matching the surface with existing finishes all as per existing finishes complete). |
| 129 | M&L in repair earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts, bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in Electrical plate No. 3 of SSR Part-I complete all as specified and directed. Please Enable Macros to View BoQ information |
| 130 | M&L in repair earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts, bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in Electrical plate No. 3 of SSR Part-I complete all as specified and directed. Please Enable Macros to View BoQ information |
