|
| 1 | PART (A) CIVIL WORK Providing and fixing of 3D sandstone ,Bansi pahadpur cladding work with 3D CARVING as per specified sculpture as per required thickness on boundary walls all complete as per direction of engineer incharge (Rate as per BOQ CBNO 1536,ITEM NO- 28) |
| 2 | Rubble Masonry with Hard Stone inSuperstructure above plinth lvl And upto floor level DSR(2023) Item No.7.8.1,RS=10471.60X0.756=7916.50 |
| 3 | Pointing on stone work with cement mortar 1:3 (1 cement:3 fine sand):Flus /Ruledpointing DSR(2023) ITEM No.13.33.1,RS=385.40X0.756=291.36 |
| 4 | Extra for course rubble masonry with hard stone (first or second short) curved on plan for a mean radius not exceeding 6m.DSR(2023)ITEMNo.7.11,RS=1133.65X0.756=857.00 |
| 5 | Mild steel or iron work of small size and section such as holding down bolts ,hold fast,tie roads grating etc.(when not included in and over all rates) wrought to required form including of supply of steel,bolts ,nuts and wastage etc.and its fixing required for proper completion of work.SOR NO.502 |
| 6 | Steel Work in Built up Tubular (Round)square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes D.S.R.(2023) 10.16.2 |
| 7 | providing barbed iron wire fencing including fixing it to post after stretching it including labour T&P etc required for proper completion of work but excluding supply of post and barbed wire but including cost of clips SOR(2025)ITEM NO. 513 |
| 8 | Cement concrete with 20mm blast approved cause sand cement in propetion 4:2:1 including supplying of material T&P As in item 279Above,But with 2cm Gauge grit.SOR no 279(1) 2025 |
| 9 | Providing galvanised barbed wire 2.5mm dia ,2-ply with 14th nos barbed per Rmt includng cost of barbed wire,Transportations charge unloadind all complete,(MR) |
| 10 | Proving / laying & fixing 5mm thick of PVC View cutter mesh, Including cost of materials, Transport loading & unloading,Stacking at site all complete.(WEIGHT=352GM/SQMT) |
| 11 | First class brick work in 1:4 cement and coase sand mortar in foundation and plinth including supply of all material,labour and T & P etc. required for proper completion of the work SOR (2025)ITEM NO. 305 |
| 12 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to thebacking and the sides by means of cramps and pins which |
| 13 | DEMOLISHING RCC work manually by mechanical meansincluding stacking of steel bars and disposal of unserviciable material . DSR Item no.15.3 |
| 14 | providing and fixing double scaffolding system on the exterior side for the work DSR Item No.14.72 |
| 15 | Rebaring work with 10ml inject able mortar epoxcy adhesive (hydrid urethane mathacrylate adhesive) or chemical commponand of make as approved by engineer-in - charge complete in all respected including drilling and cost of all materials ,10mm dia (hole size 14mm And hole deep up to 100mm) (haryana) dsr item no 31.14.2 |
| 16 | Rebaring work with 10ml inject able mortar epoxcy adhesive (hydrid urethane mathacrylate adhesive) or chemical commponand of make as approved by engineer-in - charge complete in all respected including drilling and cost of all materials ,16mm dia (hole size 20mm And hole deep up to 100mm) (haryana) dsr item no 31.14.4 |
| 17 | Mild steel or iron work of in heavy sizesuch as trusses ,built up gate door ,frames ,wrought to required form including drilling holes,rivetting or welding where necessary and also including supply of steel and wastage supply and overlapping hooks SOR(2025) Item NO.503 |
| 18 | Mild steel or iron work in plain work such as reinforced concrete or reinforcement brick work wrought to be required shape as necessary including bending for proper completion of work and including supply of steel ,wastage and overlapping & hooks SOR ITEM NO.504 |
| 19 | Providing and laying ready mix concreteor site batched design mix cement concrete for reinforced cement conc work ;using coarse aggregate derived from natural sources;to improve durability and workability without imparing strength.Concrete of M30 grade with min cement content 350kg/cum DSR ITEM NO.5.33.1.2 |
| 20 | Providing and fixing stainless steel railing made of hollow tube channel plate etc.including welding grinding buffing polishing and making curvature and fitting the same with necessary stainless steel dash fastener ,stainless steel steel bolts etc.of required size on the top of the floor or the side of waist slab with suitable arrangement DSR ITEM NO. 10.28 |
| 21 | PART (B) ELECTRICAL WORK (A) SITCof faountain As per details (1) Fountain make:-on Ground(partially)(2) Fountain desibn:-Semi-circle(large(3) Fountain Type :-Ring type (4) Regular fountain:-L=24',Deep=1',pit width=20\\" Approximate(B) Fountain setup :- 1) Complete pipes,pipe fitting &Plumbing.2)Complete Electrical wires,pipe & Electricals.3)Cmplete electro mechenicals assembly setup.4)Complete nozzeles essentials 5) complete rgb lights essentials. 6) completeinstallation & job work. |
| 22 | Supply, Laying of cable 6sqmm four core copper conductors make:-Grandlay.etc,DSRitem no 1.7.9 |
| 23 | SITC customise design Boundary wall light/ Laps post of make bajaj Arain plus 40watt light including wiring and complete ,Rate as pe CB NO-1536 Item no-22 |
| 24 | 63Amp.D.P.MCB (Cad-A) Uppwd-2018 1010 |
| 25 | SITC of Blue star make water cooler model(A) SWC-150150PS (MR) |
| 26 | Make-Blue star Stabilizer (MR) |
| 27 | Make-Blue star water purifier 20 - inches (MR) |
| 28 | Providing and fixing following rate and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing hole cubic panel making connection Voltage 690V etc.as required 2.2.7 25 A ,35 KA ,TPMCCB each 14584@ 2025 (MR) |
| 29 | Chaneover -providing and fixing of on load change over switch of current rating 25 amp ,0.4 pole ,415v and 50Hz front operateed in sheet enclosure in existing panel board including droilling holes in panel making connection etc,(MR) |
| 30 | Digging holes in ordinary soil and refining the same with the excavated earth mixed withmanure hort.(2020)item 2.14.2 |
| 31 | Providing Balwan brush cutter tiller ,balwan brush cutter chain,balwan 8\\" planter ,balwaan 12',2 stroke oil ,gear oil,1 liter ,engineer oil,engine oil,side pack brush ,back pack brush,chainsaw 18\\" CS-520,CHAINSAW 22\\" CS-560,Tree planter double gearbox-without bit BE-63,TROLLY TREE PLANTER ,power weeder (MPDT) BP-800B |
| 32 | Wolf Garden HSE 45 V# HEDGE TRIMMER 45CM (MR) |
| 33 | Aspee Marut foot sprayer Please Enable Macros to View BoQ information |
