|
| 1 | Painting one coats (excluding priming coat) on previously painted wood and wood based surface with enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter. |
| 2 | Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) A.C. sheet roofing. |
| 3 | Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. |
| 4 | Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift. |
| 5 | Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long pattern = White colour |
| 6 | Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour |
| 7 | Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) (A) Vitreous China (I) In white colour |
| 8 | Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. |
| 9 | Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- coarse sand) and jointed with white cement slurry |
| 10 | Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift. |
| 11 | Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3- sand) |
| 12 | 20mm thick sand faced cement plaster on walls upto height 10metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.1:1 (1-cement : 1-sand) etc. complete. |
| 13 | Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work |
| 14 | Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area. |
| 15 | Reparing of doors, windows and ventilator by providing and fixing required fixtures and fastenings like Adrop 20mm dia. With iron oxidised fitting, brass handle, hinges, Tadi etc as per the direction of engineer incharge |
| 16 | Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including black enamelled iron oxidixed fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (ii) Fully Panelled. |
| 17 | Providing and fixing 35 mm thick shutters for Doors, windows and clearstory windows including blackenamelled M.S. butt hinges with necessary screws. (A) Indian teak wood. (i) Fully Panelled. |
| 18 | Providing and Laying Plain Cement Concrete in open foundation including form work shuttering etc Complete as per drawing and technical Specification and as per relevant clauses of section 1500, 1700 & 2100 with P.C.C M-15 Grade |
| 19 | Providing and laying cement reinforcement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. |
| 20 | Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra for brick work in superstructure above plinth level upto floor two level (B) Conventional |
| 21 | Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. |
| 22 | Providing and fixing AC Sheet etc complete |
| 23 | Providing and fixing A C sheet ridge etc complete |
| 24 | Providing and fixing 150mm wide 450mm over all semicircular plain G.I.sheet class-3 gutter with Iron brackets 40mm x 3mm size Bolts, Nuts, washers etc. including making necessary connection with rain water pipes. (i) 0.80 mm thick Sheet. |
| 25 | Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick |
| 26 | Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. |
| 27 | Extra over item 33 for removing dry oil bound distemper on ceilingsand sloping roofs. |
| 28 | Distempeing (Two coats) with oil bound distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. |
| 29 | Providing and fixing five courses water proofing treatment with bitumen felt consisting of second and fourth course of blown / bitumen or/ and residual bitumen applied hot at 1.2 kg.per Sq.M.of area for each course and first course with fibre base bitunen saturated under lay type land third course with fibre base self finished felt type 2 grade 1 and fifth and final course of stone grit 6mm and down size or pea sizes gravel spread at 0.008 Cu. Metre / Sq. metre including preparation of surface excluding grading complete. |
| 30 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. |
| 31 | Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete |
| 32 | Scraping oil paint from steel and other metal surface and making thesurface even (with Hand Scraping.) |
| 33 | Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. |
| 34 | Painting Two coats (excluding priming coat) on previously paintedsteel and other metal surface with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. |
| 35 | Providing and supplying in stardard length ISI mark rigid unplasticised PVC pipes suitable for potable water with ring fit joints including cost of rings, as per IS specification no 4985/1988 including all local and central taxes transportatin, freight charges, octgroi, inspection charges, loading, unloading, conveyance to the site of work including cost of jointing materials etc complete Test pressure 4 kg /cm2 110mm dia |
| 36 | Providing and supplying in stardard length ISI mark rigid unplasticised PVC pipes suitable for potable water with ring fit joints including cost of rings, as per IS specification no 4985/1988 including all local and central taxes transportatin, freight charges, octgroi, inspection charges, loading, unloading, conveyance to the site of work including cost of jointing materials etc complete Test pressure 4 kg /cm2 160mm dia. |
| 37 | Providing and laying and jointing in true line and level 50 mm dia UPVC pipe (SCH-40) for cold water including fittings as approved by Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two metre c/c or shall be concealed as directed including necessary fittings etc, including testing of pipe and joints and fixing the same with adhesive solvent including cost of all materials |
| 38 | Providing and laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-40) for cold water including fittings as approved by Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two metre c/c or shall be concealed as directed including necessary fittings etc, including testing of pipe and joints and fixing the same with adhesive solvent including cost of all materials |
| 39 | Providing and laying and jointing in true line and level 15 mm dia UPVC pipe (SCH-40) for cold water including fittings as approved by Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two metre c/c or shall be concealed as directed including necessary fittings etc, including testing of pipe and joints and fixing the same with adhesive solvent including cost of all materials. |
| 40 | Providing and fixing brass screw down stop tap 15mm dia |
| 41 | Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. |
| 42 | B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. |
| 43 | Providing and fixing pillar tap capstan head screw down high pressure with screws shanks and back nuts 15mm dia. |
| 44 | Providing and fixing aluminium hanging floor door stopper, ISI marked anodised (Anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. Complete Single Rubber |
| 45 | Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection etc. complete on terrace. |
| 46 | Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. |
| 47 | Supply of good earth at site of work including conveyance, loading and loading, royalty etc complete |
| 48 | providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required.(c) One wire 2.50 sq. mm |
| 49 | Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with condenser A.C.230V 50c/s. 1400 mm. sweep complete, canopy erected on existing hook or clamp with earthing [ Make shall be approved by Engineer in Charge] |
| 50 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-III |
| 51 | Providing following type of Modular Type Accessories mounted with pvc / metallic/Woodan box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connection. As desired by Engineer In charge (2) One no 5 pin plug, Cat-III Please Enable Macros to View BoQ information |
