|
| 1 | Yatri Pratikshalaya |
| 2 | Excavation in foundations in ordinary soil (Loam clay or sand) including lift upto 1.5 m (5 fts.) and lead upto 50 mt.& including filling, watering and ramming of excavated earth . dsr 2.6.1 |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.. 2.25(A) |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from naturalsources : 8 graded stone aggregate 40 mm nominal size.dsr 4.1.8 |
| 6 | Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration DSR 2023, 2.35.3.1 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for : R.C.C. work in lintel band at G.F.dsr 5.9.5 |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). sunshade SLAB ,PLINTH BEND |
| 9 | M. S. work in R.C.C. up to two floor lvl.Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all completeDSR 5.22.1 |
| 10 | .Brick work with common burnt clay (non modular) bricks of class designation 150 in foundation and plinth in:Cement mortar 1:6 (1 cement : 4 coarse sand) 6.1.1 |
| 11 | 15 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) DSR 13.5.2.(INNER)PLINTH |
| 12 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate, DSR 11.3 FLOOR |
| 13 | Steel work in built up tublar trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer,elded and bolted including special shapped washers etc. complete: (a) Electric resistance or induction butt welded D.S.R-10.16.3 truss BASE /TOP PLATE 10MM THICK () |
| 14 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m² |
| 15 | Providing ridges or hips of width 60cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. Implet and bitumen washer complete. (a) 0.80mm thick with zinc coating not less than 275gm/sqm. D.S.R-12.4.1 |
| 16 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture, DSR 2023, 13.48.3 |
| 17 | Providing and fixing stainless steel ( grade 304) railing made of hollow tubes , channels, plates etc. |
| 18 | SIGHN BOARD RETRO RIFLECTIVE Please Enable Macros to View BoQ information |
