|
| 1 | Supplying and Fixing UPVC (Un-plasticized polyvinyl chloride) open windows of casement type (open) the profile the size of outer frame 60mm x 45mm, shutters 60mm x 36mm,and upvc beading 16mm x 125mm and 100% corrosion free the profile and reinforcement with G i /7mm multi chambered sections with wall thick 2mm,. the EPDMrubber (black colour) covered with over all the edges of frame and shutters will be provided with espay multi power point loads and also it operates as handles.Radiations free pin headed 4mm clear glass should be provided , should have key ,lockable action ,security protective hinges ,strong loading systems.The window should be fixed to the wall with 100% packing with screw and silicon packing all round the frames. The rate includes Cost and Conveyance of all materials to work site with all Labour and incidental charges for the completion of work in all respects and Fixing the UPVC window in position with window UPVC frames as directed by the Corporation Officers etc., complete. |
| 2 | Providing and fixing casement doors fabricated from un plasticdized polyvinayl chloride (UPVC)sections.Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm.The window unit should be desined with all corner joints mitred and fusion welded.windows should be steel reinforced with 25x24x25xmmsteel reinforcement with a thickness of 1mm to have dimensional stability.The sash should be of 60x102mm. The mullion should be of 60x74mm. The profiles should have co extruded seals.hardware: All the hardware like friction stays , handles should be screwed with self tapping screws. The handles locks should be designed so that they cannot be released from outside.Glazing The window system should be glazed with 5mm plain float glass/ 6mmbison Iam . Installation : The profiles should be cut to length and welded 45 degrees.The window should be designed such that the water drainage does not pass through the reinforcement chamber.The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms eletroplated screws into plug. |
| 3 | Flooring with Double charged Nano VERTIFIED TILES OF approved quality and colour of size 600x600x8mm in all floors over 20mm thick cement mortar 1:3 (One cement and three m sand)base above the existing bed concrete and pointing with same colour cement added with colouring pigments complete copmpltying with standard specification.(Item no 256 Data book |
| 4 | supplying and erectim fixing for Air condition, stblizer ,double pole MCB with box,single pole MCB with box 20amps, 3 core 2.50 sq mm cable ngwire, 4 x10 sqmm alu Ug cable,63 amps TPN MAIN SWITCH (LT/LK make) with main switch etc completeas per standard specicification etc complete. |
| 5 | Supplying and fixing of 8mm thick Gypsum design board false ceiling in bays of size 600mm x 600mm using powder coated GI angle to the wall support and the main frames using powder coated 24x27mm T angle and intermediates with same T angle. The charges includes fixing the GI angles with adjustable steel rods dropping from the roof purlins and truss and fixing the board in position and all costs and taxes etc complete.The Gypsum design board should be got approved before use on work. |
| 6 | Supplying PAINTING TWO COATS with best and approved first quality of plastic emulsion paint (weather shield)in the inner and outer walls overONE primary coat of wall primer including cost of paint and other materials,brushes,scaffolding charges including clearing the existing surface by manual labour as directed by the departmental officers complying with standard spefication etc complete. |
| 7 | Supplying and fixing for Window screen arrangements including 1'' pipe, screen cloth, side doom and fixing labour charges as per standard specification for Corporation officers etc |
| 8 | Supplying and fixing for Door closer arrangements including fixing labour charges as per standard specification for Corporation officers etc |
| 9 | Supplying and fixing for Tube light fitting as per standard specification for corporation officers etc. |
| 10 | Supplying and fixing for ceiling fan as per standard specification for corporation officers etc. |
| 11 | CEMENT CONCRETE 1:5:10 (One cement, five M-sand and ten aggregate) using 40mm gauge hard granite stone jelly for Foundation & BASEMENT including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed and consolidated complying with standard specification etc complete. |
| 12 | Charges for chipping and chissiling the jolly portion and then BRICK WORK in cement mortar 1:5 (One cement and five M-sand) using second class chamber burnt bricks of size 9\\" x 4 3 / 8\\" x 2 3 /4\\" for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). |
| 13 | Plastering with cement mortar 1:5 (one cemene and five p sand ) 12mm thick in all floors complying with standard specification for septic tank mixing with water proofing compound etc complete Please Enable Macros to View BoQ information |
