|
| 1 | 1.1.1) Removing the excavated materials,debris of any description and any other waste materials,spoil including loading into trucks/tractors using baskets by head load or any other means and transporting by trucks/tractors and unloading at the earmarked places, spreading / levelling complete and disposal inside plant within 1 KM lead. |
| 2 | 02.08.01) Earth work in all kinds of soil in foundation, trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus earth as directed within a lead of 50 M. Disposed soil to be levelled and neatly dressed. Lift upto 1.5 m in all type of soil. |
| 3 | 02.26.01) Extra for Earth work in all kinds of soil in foundation, trenches or drains exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift from 1.5m upto 3.00m including getting out the excavated soil and disposal of surplus earth as directed within a lead of 50 M. Disposed soil to be levelled and neatly dressed. Lift from 1.5m to 3.00 m in all type of soil. |
| 4 | 02.09.01) Earthwork excavation in soft rock / ordinary rock in foundations not exceeding 1.5m in width or 10 Sqm. on plan including dressing of sides and ramming of bottoms lift as mentioned above including getting out the excavated soil and disposal of surplus earth as directed within a lead of 50m. Disposed soil to be levelled and neatly dressed.Lift upto 1.50m in ordinary / soft rock. |
| 5 | 02.26.02) Extra for Earthwork excavation in soft rock / ordinary rock in foundations not exceeding 1.5m in width or 10 Sqm. on plan including dressing of sides and ramming of bottoms lift as mentioned above including getting out the excavated soil and disposal of surplus earth as directed within a lead of 50m. Disposed soil to be levelled and neatly dressed.Lift from 1.5m to 3.00 m in ordinary / soft rock. |
| 6 | 02.25.00) Back filling with selected excavated earth or any other materials around the foundations, under floors, pavements or any other places in layers not exceeding 20 cm, watering and ramming, consolidating etc. complete. |
| 7 | 02.27.00) Filling of sand under floors in trenches sides of foundations etc. including supply of sand and watering, ramming, consolidating and dressing etc. all complete as directed by Engineer-in- Charge. |
| 8 | 04.01.03) Providing and laying plain cement concrete at all depths below and upto ground level in foundations,fillings,non-suspended floors including tamping, curing etc. including the cost of centering and shuttering etc. as specified or directed in any shape,position, thickness and finishing the top surface rough or smooth etc.all complete(CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)P.C.C.1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 20 mm nominal size) |
| 9 | 04.01.05) Providing and laying plain cement concrete at all depths below and upto ground level in foundations,fillings,non-suspended floors including tamping, curing etc. including the cost of centering and shuttering etc. as specified or directed in any shape,position, thickness and finishing the top surface rough or smooth etc.all complete(CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)P.C.C.1:3:6(1cement: 3coarse sand: 6 graded stone aggregate 20 mm nominal size) |
| 10 | 05.01.02) Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE) |
| 11 | 05.02.02) Providing and laying reinforced cement concrete work in foundation, roofs, slabs, lintels, beams,chajjas, columns,walls in vertical or horizontal fins bressummers,shelves, suspended floors, landing, balconies, pillars, piers, abutments, posts and struts etc. in super structure up to floor five level (a hight of 20 metres from ground level), including necessary curing, smooth finishing of exposed surface as directed by Engineer-in-Charge but excluding cost of reinforcement, centering and shuttering etc. completeCEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE). With RCC grade 1:1.5:3 (1 cement: 1.5 sand: 3 stone aggregate). |
| 12 | 05.09.01) Centering and shuttering including strutting, propping etc. and removal of form work for raft of foundations, footings of columns, up to plinth level , as directed by Engineer-in Charge.Work in foundation and footing upto ground level in all shape and sizes. |
| 13 | 05.09.02) Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, columns, pillars, posts, struts,plinth beam up to plinth level , lintels, roofs, cantilevers, roof beams as directed by Engineer-in Charge.Work above ground level up to all heights, shapes and sizes. |
| 14 | 05.22.03) Bending / Binding and placing in position high yield deformed bars reinforcement conforming to IS:1139 or cold twisted deformed bars reinforcement conforming IS:1786 for R.C.C.work at all height and depths,carting the same from store/issue points to site of work, straightening, cleaning, bending to required shape and lengths as per details including supplying and binding with contractor's own soft annealed binding wire and placing with proper cover blocks, supports, chairs, spacers and return of unused/ scrap/ unserviceable steel to owner's storage point etc all complete. (REINFORCEMENT STEEL/TOR STEEL SHALL BE ISSUED FREE OF COST AT NALCO's STORE) |
| 15 | 06.01.02) Providing & laying Brick masonry in foundations, superstructure in any shape including scaffolding, staging, curing, all complete in Cement mortar (1 Cement:6 sand) up to a hight of floor V ( 20 metres from ground level). (Cement will be issued free of cost at Nalco's store ). |
| 16 | 10.02.00) Transporting, fabricating, erecting and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position at all height with all necessary arrangements and applying a priming coat of approved steel primer using structural steel etc. as required, in columns, trusses, girders, gratings, frames, guard bar, ladder, railings, brackets, gates, grills, purlins and similar works, including all labours all complete as directed by Engineer in charge.( All Structural steels will be issued free of cost ). |
| 17 | 10.20.1) Providing and fixing bolts of required size in position, including nuts and washers, including all materials, all labours for threading and fixing all complete as per the direction of Engineer-in-charge. (No materials will be issued by NALCO for this item ). |
| 18 | 11.03.01) Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. with mm thick with 20 mm nominal size stone aggregate (Cement will be issued free of cost at NALCO's store). |
| 19 | 13.1.2.) Providing and applying 15mm cement plaster with 1:6(1 cement:6 course sand ) including necessary scaffolding, all labour, tools & tackles, all materials, curing for seven days. (Cement will be issued by NALCO at free of cost) |
| 20 | 13.62.01) Supplying and Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work, cleaning the surface thoroughly, including all materials and all labours, etc . |
| 21 | 12.01.02/3050) Fixing in position CGI Sheets/translucent fibre reinforced plastic sheet of standard sizes/PPGL sheets/ Aluminium alloy sheets including taking delivery from NALCO's Stores for all works in roofs, walls gables, claddings and louvers etc. including all accessories like self drilling screw, stitch bolts limpet washers, bitumen washers etc. including cutting, mitering, drilling, temporary, scaffolding, staging with safety rules, all labours, tools tackles etc. all complete at all height.(CGI SHEET/TRANSLUCENT REINFORCED FIBRE GLASS SHEET/PPGL sheets/Aluminium alloy sheets SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) |
| 22 | 12.04.1/0992) Taking delivery from NALCO\\"s Store, transportation to site and fixing plain GI sheet of 600 mm width for ridge, cornor pieces, flashings, north light curves bargeboards etc, bent to shape fixed with supply and fixing of approved self drilling screw, bolts, nuts. GI limpet and bitumen washers approved make, necessary laps, finishing, providing hooks, nuts, sitch bolts etc all complete as per specification and direction of Engineer in charge at all heights.(ONLY PLAIN GI SHEETS SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE). |
| 23 | 15.02.02) Dismantling and demolishing cement concrete work including disposal of debris/ dismantled material lead of 50 mtrs. as per the direction of Engineer-in- Charge. |
| 24 | 15.03.00) Dismantling of R.C.C. work including stacking of bars and disposal of unserviceable materials within 50 mtrs. lead as directed including cutting reinforcement bars from RCC work etc. complete. |
| 25 | 15.9.2) Dismantling all type of Masonry, stacking serviceable materials at site and removing rubbish including filling in low lying areas of Plant/Township/mines as the case may be etc. all complete as per direction of Engineer-in-charge (up to a lead of 50 mtrs). |
| 26 | 15.19.00) 15.19 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. kg 1.30 |
| 27 | 13.40.0) Distempering with distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. |
| 28 | 13.46.1) Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 29 | 10.11.1) Providing and fixing factory made steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer,, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete |
| 30 | 9.7.7.1) Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows, ventilators (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). with 4mm thick Float glass panes Please Enable Macros to View BoQ information |
