|
| 1 | M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified. |
| 2 | M&L for light coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not less than 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6. |
| 3 | All as per item No.2.00 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces. |
| 4 | M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 |
| 5 | M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces. |
| 6 | Taking down cement or cement lime plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and complete all as specified |
| 7 | M&L Rendering 5mm thick plastering in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed. |
| 8 | M & L preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and as directed. |
| 9 | M&L for preparation of old plastered or unplastered surfaces of ceiling and applying two of white wash complete all as specified and directed. |
| 10 | M&L Rendering 12 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surfaces (either surfaces) of wall and finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M & L for preparation of new plastered surfaces of walls and applying 1.5mm thick wall care putty complete all as specified and directed. |
| 12 | M & L for preparation of newly putty surfaces of walls and applying two coats of oil emulsion distemper complete all as specified and directed. |
| 13 | M & L for preparation of old wall surfaces and applying 1.5mm thick wall care putty, including scraping of old surfaces,removal of loose material , cleaning, stopping and filling cracks, holes and undulations, finishing the surface smooth and even, complete all as specified and directed by Engr-in-charge. |
| 14 | M&L Rendering 5 mm thick in cement mortar 1:4 over a layer of 10mm thick rendering in cement mortar 1:6 on fair face of brick work/ concrete surfaces of wall with water proofing admixture finished even and smooth without using extra cement complete all as specified and directed. (WPC will be measured and paid separatly) |
| 15 | Supply only liquid water proofing compound complete all as specified and directed. |
| 16 | M&L Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed. |
| 17 | Complete removal of existing treatment and M& L Preparation of old plastered surfaces of walls and applying two coats of cement base paint on walls complete all as specified and directed. |
| 18 | M&L for preparation of old painted wooden surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paint and complete. |
| 19 | M&L for preparation of old painted steel surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paint and complete. |
| 20 | Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 250 liters and not exc. 500 liters complete all as specified and as directed. |
| 21 | Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 500 liters and not exc. 1000 liters complete all as specified and as directed. |
| 22 | M&L for treatment of soil under existing floors using emulsion @ one litres per hole 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors and all as specified and directed. |
| 23 | S&F in repairs plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified. |
| 24 | S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed. |
| 25 | S&F in repairs vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm including flush pipe , PVC P-trap and PCC for fixing complete all as specified and as directed. |
| 26 | S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified. |
| 27 | S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets. |
| 28 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm. |
| 29 | S & F in repairs brass waste coupling of 32 mm dia for WHB all as specified and as directed |
| 30 | Supply and fixing in repair PVC heavy duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed |
| 31 | S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified. |
| 32 | S&F in repair CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified |
| 33 | S&F in repair CP grating 100 mm dia all as specified and as directed. |
| 34 | S&F Single mirror bath room cabinet moulded body and frame (made of strong and fine quality A.B.S plastic) with hinged door (size 16\\"x12\\"6\\") white/ivory in colour. |
| 35 | S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long |
| 36 | S&F in repair corner shelf (set of three) of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) and all as specified and as directed. |
| 37 | S & F in repair 600 x 450 mm beveled edge mirror of selected quality glass of 5.5 mm thick mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and as directed |
| 38 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm. |
| 39 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm. |
| 40 | S&F 16mm 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 41 | All as per item No 40.00 above but 20 mm bore. |
| 42 | S&F in repair stop/gate valves/angle valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle for 15mm bore. |
| 43 | S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule. |
| 44 | S&F in repair 15mm Pillar taps cast copper alloy, capstan heads CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule. |
| 45 | S&F in repair Brass chromium plated shower rose 125mm size with arm |
| 46 | Dismantling of existing water tank (PVC/RCC/AC) exc 250 ltr but n exc 500 ltr capcity and removing from site complete as directed by Engr -in-charge. |
| 47 | S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair. |
| 48 | Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as directed by Engr -in-charge. |
| 49 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair. |
| 50 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia and complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F 75 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls and complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F PVC (SWR) door bends 75mm dia with access door and complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm with acess door and complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement and complete all as specified and directed by Engr-in-Charge. |
| 55 | S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors |
| 56 | S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls and complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal and complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F PVC (SWR) door bends 110 mm dia with acess door and complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F 110 mm dia PVC WC connector with lip ring complete all as specified and directed by Engr-in-Charge. |
| 60 | Resecuring or easing & adjusting without taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each and complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F Auto hinges for cabinet case (Make ; KARF / HETICH) |
| 62 | S&F 75 mm size stainless steel bright finish handle for cabinet shutter |
| 63 | S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm and complete all as specified and directed by Engr-in-Charge. |
| 64 | M&L for granite (of any type) tiles 20 mm thick machine cut in skirting/dado over and including 15mm thick rendering in CM 1:6 on stone masonry surfaces, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F plain white 18mm thick PVC sheet/board of required size in cupboards and in similar works includingbrackets/bolts for fixing. The panels shall be fabricated using adhesive and screws where required .All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed. |
| 66 | S&F cupboard shutters of required sizes at site made out of 18 mm thick one siode decorative teak face finish consisting of 18mm thick PVC sheet/board including all necessary fittings and fixtures like handles, hinges, locking devices, magnetic catches etc. All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified |
| 67 | S&F ball catches with 8mm dia steel ball and brass body and skirting plate including letting in and fixed and complete all as specified and directed by Engr-in-Charge. |
| 68 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed . |
| 69 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) n,exc 1.5 Sqm each complete all as specified and directed . |
| 70 | S&F steel windows with side hung shutters including projecting type hinges sith steel handle and steel peg stay , complete with glazing bars, dovetailed or welded. (Note : One AC vent of size 0.70 mtr x 0.50 mtr with top hung shutter will be provided) |
| 71 | S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars complete all as specified and directed by Engr-in-Charge. |
| 72 | M&L for 2nd class hard wood as in plain solid staight chowkats and frames wrought framed rebated on the solid rounded or chamfered put to gather with glue pinned at joints complete all as specified. |
| 73 | S&F MS framed work such as grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron door, ladders, framed balusters, walk way, railings frame work of water tank and similar work confirming to Fe 290 Gde E165 complete all as specified and directed. |
| 74 | S & F structural steel rolled section in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; complete confirming to FE-290(Gde E-165) also fastening and fixing complete all as specified and directed |
| 75 | S&F galvanised Stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge. |
| 76 | M&L for plain cement concrete type B-1 (1:2:4) using 20mm graded cruhed stone agg as in seismic and other similar bands shelves coping bed plates hold fasts plinth courses filling in pressed steel frame and the like finished fair and even incl necessary from work complete all as specified & directed. |
| 77 | S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated. |
| 78 | M/L for Glazed and skeleton shutters of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of doors shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats note: Glazed or clothetc in panelsor sash square shall be measured seperately |
| 79 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed. |
| 80 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 81 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 82 | M&L for preparation of New wooden surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint and complete. |
| 83 | M&L for preparation of new steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint and complete. |
| 84 | S&F extructed aluminium alloy handles, fabricated type,anodised of size 150mm. |
| 85 | S&F Aluminium anodised barrel tower bolt of extruded section 200mm size |
| 86 | S&F Butt hinges, medium weight cold rolled mild steel of size 100mm. |
| 87 | S&F in repairs extructed aluminium alloy handles, fabricated type,anodised of size 150mm. |
| 88 | S&F in repairs Aluminium anodised barrel tower bolt of extruded section 200mm size |
| 89 | S&F in repairs Butt hinges, medium weight cold rolled mild steel of size 100mm. |
| 90 | S&F in repairs stainless steel curatin rod , high strength MS pipe with powder coated extrusion having outer dia 28 mm including stainless steel fixing brackets all as directed by Engineer-in-Charge. |
| 91 | S&F in repairs Stainless Steel cap for curtain rod for 28mm dia curtain rod as directed by Engineer-in-Charge. |
| 92 | S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed. |
| 93 | S&F in repairs galvanised Stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples |
| 94 | Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge |
| 95 | S&F in repairs floor door stopper, with 150 mm long, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor. |
| 96 | S&F in repairs 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 97 | S&F in solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors all as directed by Engineer-in-Charge. |
| 98 | S&F in repairs box type hinges of steel window/ventilator, 75/100 mm long including necessary fixing & welding work etc complete all as directed by Engr-in-charge. |
| 99 | S&F in repairs left/right MS handle of steel windows including welding(if required) & fixing complete all as directed by Engr-in-charge. |
| 100 | M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones. |
| 101 | S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified. |
| 102 | S&F in repairs for stailess steel kitchen plate rack size-31x30x10 inch , and complete all as directed by Engr-in-charge |
| 103 | S&F in repairs for center hole basin mixer without popup waste system and complete all as directed by Engr-in-charge |
| 104 | S&F in repairs for sink mixer with regular spout w/m and complete all as directed by Engr-in-charge |
| 105 | S&F in repairs for wall mixer with bend, and complete all as directed by Engr-in-charge |
| 106 | S&F in repairs brass chromium plated health faucet of 15 mm bore complete. |
| 107 | S&F figured glass 4mm thick, pin head type and glazing with oil putty in square n. Exc 0.5 Sqm in each pane complete all as specified & as directed |
| 108 | M&L for powder coated anodised aluminium frame for door window & ventilator with one or more rebates including joining cleat for fixing etc comlete all as specified. |
| 109 | S&F MS powder coated louvers with including arrangement of fixing glass pinhead as per size & louvers ventilator (Glass shall be measurement separately) complete all as specified and as directed. Please Enable Macros to View BoQ information |
