|
| 1 | M & L for Preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coat of white washwith auto paint roller on old surfaces of walls complete and all as specified Note- Surface to be made even and smooth by filling the depression if any. |
| 2 | All as per Srl items No 01 here in before but on ceiling complete and all as specified. |
| 3 | M&L applying 2-3mm thick Altek/Birla white wall care putty on wall/ceilling to obtain smooth surfaces and even finish by using vacume based sanding machine,including preparation of surfaces etc. |
| 4 | M&L Preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of acrylic exterior emulsion paint as approved of any shade/colour in camouflage pattern complate all as specified and as directed.Note : Surface to be made even and smooth by filling the depression if any. |
| 5 | M&L Preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by using vacum based sanding maching to remove all smoke dust,moulds,moss and efflorescent salts and removing oily and greasy spots etc applying one coat of distemper oil emulsion of shade as approved by Engr-in-charge with auto paint roller on old surfaces of walls all as specified and directed. Note- Surface to be made even and smooth by filling the depression if any. |
| 6 | All as per item 05 above but applying two coats. |
| 7 | All as per item 05 above but on ceiling |
| 8 | M&L preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 9 | M&L preperation of new or previously untreated surfaces of wood or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer comlplete all as spd and as directed. |
| 10 | M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint all as specified and directed. |
| 11 | M&L brick work with sub class B bricks straight or curved on plan 6m mean radius built in cm 1:6 including demolition of existing brick work all as spd. |
| 12 | all as above item No 11 here in But except bricks. |
| 13 | Taking down cement or cement lime plaster in any positon all as spd. |
| 14 | Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, all as specified and directed. |
| 15 | M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of acrylic exterior emulsion paint as approved of any shade/colour in camouflage pattern on new surface all as specified.Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor. |
| 16 | Rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including applying two coats of weather proof emultion paint incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor. |
| 17 | Demolition of cement concrete of any desription and in any position not otherwise specifically provided for |
| 18 | M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth/floor/sub base, 50mm thick and finished even and smooth without using extra cement all as directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubbish off the premises all as directed. |
| 20 | M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified. |
| 21 | M&Lcoloured Vitrified Double Charge tiles 10mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified. |
| 22 | M&L glazed ceramic coloured tiles of size 600 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement motar 1:4 complete, all as specified. |
| 23 | Renewing tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as directed. |
| 24 | M&L Granite (Z-black colour), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges complete,complete. all as specified. |
| 25 | M & L marble work 18 to 20mm thick as in cooking platform and like (Makarana white) in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with existing Shed |
| 26 | Grinding and mirror polishing of existing Kota stone, marble stone or mosaic flooring complete all as specified |
| 27 | S&F Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand. |
| 28 | Cleaning and removing all scale and dirt etc from tanks and mouth of eructing pipe incl disconnecting existing tanks and refixing in position on top of T-Base position after cleaning for 500 litres capacity of tank including complete all as specified.(Tank should be marked with stencil letter cutting Complete Date and Year with enamel paint.. (T-Base Make-Vectus/Suprime/plasto) |
| 29 | Cleaning and removing all scale and dirt etc from tanks and mouth of eructing pipe incl disconnecting existing tanks and refixing in position on top of T-Base position after cleaning for 1000 litres capacity of tank including complete all as specified.(Tank should be marked with stencil letter cutting Complete Date and Year with enamel paint..(T-Base Make-Vectus/Suprime/plasto) |
| 30 | Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 500 litres Vectus-smart weight of tank 22 to 25kg/tank , Blue colour, (cylindrical vertical with closed top) hoisted including Vectus T-Base, and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nut etc complete including dismantling existing water tanks Rcc/Iron/Pvc all as specified and directed. Tank should be marked with stencil letter cutting Date and Year with enamel paint..(Make-Vectus/Suprime/plasto) |
| 31 | Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 1000 litres Vectus-smart weight of tank 44 to 50kg/tank , Blue colour, (cylindrical vertical with closed top) hoisted including Vectus T-Base, and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nut etc complete including dismantling existing water tanks Rcc/Iron/Pvc all as specified and directed. Tank should be marked with stencil letter cutting Date and Year with enamel paint..(Make-Vectus/Suprime/plasto) |
| 32 | Taking up or down steel tubing 15mm bore and connections all as spd. |
| 33 | S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified. |
| 34 | All as per Srl item No 26 here-in-before, but fixing only |
| 35 | Taking up or down steel tubing 20 mm bore and connections all as spd. |
| 36 | S&F in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing as specified. |
| 37 | All as per Srl item No 38 here-in-before, but fixing only |
| 38 | M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified. |
| 39 | S&F in repair 15 mm dia bore Stop valves, chromium plated exposed part kit of concealled stop cock with operation liver collor bush and adjustable wall flange with long shank screwed down high pressure with capstan head handle screwed both ends for iron pipe or for union all as specified Make : Jaquar/Kolher/American standards. |
| 40 | S&F in repair 20 mm dia bore Stop valves, chromium plated exposed part kit of concealled stop cock with operation liver collor bush and adjustable wall flange with long shank screwed down high pressure with capstan head handle screwed both ends for iron pipe or for union all as specified Make : Jaquar/Kolher/American standards. |
| 41 | S&F in repair, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight15mm-142gms / 20mm-210gms / 25mm-455gms / 40mm-690gms) |
| 42 | S&F in repair vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' or 'S' trap complete incl making good to floor all as specified. |
| 43 | S&F in repairs Vitreous China wash down water closet pan of size 540X375X415mm (pedestel pattern) white,including P/S trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, plastic water closet seat of white in colour,back closed pattern (soft close) with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified. Make : Hindware/Cera/Jaquar/Prayag. |
| 44 | S&F in repair vitreous china pedestal wash hand basin (With Legs) white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe CP Swan neck pillar tap wight not less than 500 gram cast copper alloy with capstan heads chromium plated fancy to be fixed in M S brackets complete all as specified. |
| 45 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete.all as specified. |
| 46 | S&F in repair heavy duty dual flush 10 ltr capacity Cennaware PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. |
| 47 | S&F PVC connection 15mm bore size with two brass nuts and washers of length 450mm all as specified. |
| 48 | S&F PVC connection 15mm bore size with two brass nuts and washers of length 600mm all as specified. |
| 49 | S&F Cabinet mirror plastic body for toilet of size 350x450mm with 4mm thick looking mirror complete all as specified. |
| 50 | S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm all as specified. |
| 51 | S&F Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or demolition of existing cemented/marble kitchen sink and making good with providing Marble strip as reqd . Overall size of sink 610 x460mm and bowl size 550 x400mm |
| 52 | S&F in replacement stainless steel plate rack of size 900mm X 900mm X 250 mm thickness of sheet not less than .9 mm (ISI marked) all as specified . Make : Jainko/Prayag/Mirali. |
| 53 | Health faucet, brass , cromium plated with 1200 mm long 8mm dia chrome finish flexible pipe with wall hook , screwed for 15 mm bore pippe connection fixed in repair complete all as specified and directed by Engr-in-charge. Make : Jaquar/Kolher/American standards. |
| 54 | S&F in repair bib taps fancy type cast copper alloy ISI marked with crutch or butter fly handle with wall flange high pressure screwed down screwed for iron pipe of 15mm bore weight not less 400 gram complete all as specified.Make : Jaguar/Cera/Jainko. |
| 55 | S&F in repairs bib taps suitable for 15mm bore weight not less 700 gram pipe long body fancy type brass CP with, Capstan head screwed down screwed for iron pipe or brass ferrule complete fixed in repair and all as specified. Make : Jaguar/Cera/Jainko. |
| 56 | S&F in repairs cast copper alloy chromium plated fancy type central hole basin mixer with capstan head for high pressure suitable for 15mm bore pipe not less than 800 gm complete and all as specified. Make : Jaguar/Cera/Jainko. |
| 57 | S&F in repirs wall mixture brass chromium plated suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Wight not less than 1200 gram. Make : Jaguar/Cera/Jainko. |
| 58 | S&F Angle valve ,brass chromium plated fancy type with capstan head handle screwed down high pressure, including CP brass wall flanges, screwed for 15 mm bore pipe connection fixed in repairs complete all as specified and directed by Engr-in-charge. Make : Jaquar/Cera |
| 59 | S&F in repair Shower rose brass chomium plated 100mm dia with CP arm 150 mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in complete all as specified and directed by Engr-in-charge. Make : Jaquar/Cera |
| 60 | Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified. |
| 61 | Supply and fixing in repairs plastic sheet white in colour soft closed pattern with flat bottom and cover including chromium plated hinge device. |
| 62 | Supply and fixing in repairs Door closer hydraulically regulated designation No-2 universal type ISI marked suitable for door shutter of weight between 36 to 60 kg, cast iron body complete and all as specified. |
| 63 | Material & labour for fixing of snake guard made of aluminium /MS colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified. |
| 64 | S&F Drapery curtain rod of SS heavy duty with SS bracket 20mm dia complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified |
| 65 | S&F in replacement 100mm/75mm bore cast iron floor trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, all as specified. |
| 66 | S&F grating round 100mm/75 mm size of CP with/without hole weight not less than 70 gm each as specified. |
| 67 | S&F 100mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls all as specified. |
| 68 | All as above item No 70 here in before but 75mm bore. |
| 69 | S&F 100mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) all as specified. |
| 70 | S&F 75mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) all as specified. |
| 71 | S&F, 100mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches all as specified. |
| 72 | S&F, 75mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches all as specified. |
| 73 | Removing of vegetation / plantation on the wall/ roof/any position, of up to double storey building including necessary scaffolding upto 6 m height and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete.(Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately) |
| 74 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast. |
| 75 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified. |
| 76 | Taking down shutters of any description n.exc 1 sqm each all as specified. |
| 77 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each all as specified. |
| 78 | Taking down shutters of any description exc 2 sqm each all as specified. |
| 79 | S&F in repair GI spout pipe medium weight 50mm bore dia of length 450mm set in PCC 1:4:8 porous concrete and make the external portion with CM 1:3 with and including water proofing @ 200 ML per bag complete all as specified |
| 80 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type c-1 hold fast for howkhat,similar wall tile,floor tile etc and as per site requirement. |
| 81 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type c-1 hold fast for howkhat,similar wall tile,floor tile etc and as per site requirement. |
| 82 | S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 83 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type c-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement. |
| 84 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N Face) & 900 N (Edge),minimum ressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to pread of flame of Class A category with property of being termite/borer proof, ter/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 85 | S & F factory made single extruded WPC (Wood Polymer Composite) 35mm thick solid wire gauge door shutter including of double wire mesh (steel and aluminium XPM) comprising of virgin polymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 86 | S & F fully glazed/wire gauge (single piece Both side) Wooden door shutter 35 mm thick (style) consisting of frame made out of mild steel tubes of size 19mm x 19 mm (19 gauge) for top and bottom rails and 19mm x 19 mm (19 gauge) in styles. Single Pieces plain coloured PVC sheets 5mm thick to be used to cover styles and rails.PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles & plain coloured PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panel will be wire gauges and tighten firmly and fitted as per manufactures instructions including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm and Aluminum XPM in rhombus shape, in one Piece from top rail to bottom rail taking down with existing one all as specified and directed by Engineer-in-Charge. NOTE : All screws shall be self tapping chromium plated. |
| 87 | S &F in repairs Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples all as specified & directed. |
| 88 | S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane including hacking out broken glass all as specified. |
| 89 | Hacking out old broken glass (any thickness, size quality or description) from wooden/steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads |
| 90 | S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane glass all as specified. |
| 91 | S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm |
| 92 | S&F in repair, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified. |
| 93 | S&F Stainless steel sliding door bolts, plate type, bright bolt not lesss than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long( selected quality as approved ) all as specified. |
| 94 | S&F Stainless steel Tower Bolt of 200 mm long ( selected quality as approved ) fixed with Self Tapping screws all as specifed |
| 95 | S&F Stainless steel Handel of 150 mm ( selected quality as approved ) long fixed with Self Tapping screws all as specifed |
| 96 | Resecuring or easing and adjusting without taking down shutter of any description exc. 1sqm but n.exc 2.00 Sqm complete all as specified |
| 97 | Taking down existing cabinets cupboards and Supply and fixing in repair factory made 20 mm thick solid WPC(wood particle composit) UV Printed prelam sheet having both side wood nature colour for cupboard partitions/slabs of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, complete as per direction of Engr-in-charge, Manufacture specification. |
| 98 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 99 | M & L for 0.80 mm thick PVC edge binding tape around the 20 mm thick PVC shutter edge colour as directed, complete all as specified and directed. |
| 100 | Supply and fix in repair stainless steel auto closing hydraulic hinges in cupboard fixed in required positioncomplete all as specifed and directed by Engineer-in-Charge. |
| 101 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (suspension Grade) calcium carbonate and natural fibers (wood power/rice husk/wheat husk) and non toxic additives (maxium toxicity index of 12 for 100 gms) having minium density of 650 Kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/mm2, modulus of elasticity 850N/nm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. (Note Stainless steel butt hinges and necessary SS screws shall be paid separetely. |
| 102 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 103 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimensionof uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 104 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of indow above 1.75 sqm upto 2.50 sqm) comprising of uPVC multi chambered frame, with inbuilt roller rack and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy bodywith single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile imension in higher side shall be accepted but no extra payment on this account shall be made. |
| 105 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC ulti-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealantover backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 106 | S&F Cabinet mirror plastic body for toilet of size 622x422mm with 4mm thick looking mirror complete all as specified. |
| 107 | S&F Framed work such as grills,gratings etc.with ends of bars,shouldered and/or riveted,or forged into pikes,framed guard bars,etc,complete all as specified and directed. |
| 108 | S & F for providing and fixing stainless steel (Grade 304) railing made of hollow ubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts omplete, including fixing the railing with necessary accessories & stainless steel dash asteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 109 | M&L for repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc all as specified . |
| 110 | M&L for refixing of CP grating of floor trap of any size and type applying white cement in gaps of WHB,sink,Grating,Urinals and the like not otherwise specified joint and making good the surface complete all as specified and directed by Engr-In-Charge. Note-Each job contain of minimum 05 Nos of refixing of grating and cement filing of 05 Nos of Gap Filing. |
| 111 | M&L for refixing of Sanitary fittings like that tap/pillar tap,Flush tank,OHT float valve,Pvc west pipe,Pvc connection,Stop cock,showre rose,sink/WHB Coupling etc and the like not otherwise specified joint and making good the surface complete all as specified and directed by Engr-In-Charge. Note-Each job contain of minimum 05 Nos. |
| 112 | S&F shower water drainer floor Bathroom Grating with Anti-Foul Cockroach Trap (Silver) (Center-Hole) Size 36\\" X 4\\" including cutting of tiles/ To be facilitated the fixing of the trap all as specified. |
| 113 | S&F stainless steel wire cloth fixed as in uPVC Window frame/Steel window box type frame/skeleton shutters frame etc, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staples. |
| 114 | S&F 5.00mm thick glass fixed with rubber packing for securing in aluminium/uPVC windows snap beading and metal pins in skelton shutters of doors and windows complete all as specified. |
| 115 | Vitreous china premium/ 1st quality wash down water closet wall hung EWC hite/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(Including flushing cistern & flush pipe) complete in all respect all asspecified. |
| 116 | M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth,75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concret. |
| 117 | M&L for 12mm thick full body vitrified single piece tiles (homogeneous) for stairs with anti skid property and having self embossed grooves (for tread portion) and its skirting in single colour set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. complete all as specified and directed by Engr-In-Charge. Please Enable Macros to View BoQ information |
