Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 2 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and as directed. |
| 3 | S&F Fe 410-W (GdeE- 250) quality A framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 4 | S&F Steel rolling shutters of 1.25mm lath thickness, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle complete all as specified and as directed. |
| 5 | S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 6 | S&F ball bearing for rolling shutters complete all as specified and as directed. |
| 7 | M&L for preparing new or previously untreated surfaces applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed. |
| 8 | M&L one coat of synthetic enamel paint (1st grade quality) to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete all as specified and as directed. |
| 9 | M&L for PCC type C1, 1:3:6 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, hold fast blocks, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and as directed. |
| 10 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 m and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and as directed. |
| 11 | M&L for brick work with sub-class ‘B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:4) complete all as specified and directed. |
| 12 | Taking down cement plaster on brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 13 | M&L 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 14 | M&L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 15 | Supply only integral water proofing compound. |
| 16 | M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed. Note - Rates shall be quoted including sufficient scaffolding, ladder etc. for 7 mtr height. |
| 17 | M & L for preparing newly plastered surfaces of walls and applying three coats of white wash on wall complete all as specified and directed. Note - Rates shall be quoted including sufficient scaffolding, ladder etc. for 7 mtr height. |
| 18 | M & L for preparing old completely removed existing treated plastered surfaces of walls and applying two coats of white wash on wall complete all as specified and directed. Note - Rates shall be quoted including sufficient scaffolding, ladder etc. for 7 mtr height. |
| 19 | M&L for preparing old decorated surface of wall/chajja and applying one coat of cement base paint on surface of wall/chajja all as specified and directed. Note - Rates shall be quoted including sufficient scaffolding, ladder etc. for 7 mtr height. |
| 20 | S&F steel windows for industrial buildings, fixed type, with glazing bars (ISI marked) complete all as specified and as directed. |
| 21 | Hacking out old broken glass (any thickness, size, quality or description) from metal/aluminium frames including punching or drilling out old glazing pins / spring clips and providing new pins / spring clips complete all as specified and as directed. |
| 22 | S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 23 | S & F Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with Stainless steel wire staples complete all as specified and as directed. |
| 24 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 25 | M & L 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection/floor finishes etc, finishing cement concrete surface even and smooth with out using extra cement complete all as specified and as directed. |
| 26 | M&L for self adhesive bitumen waterproofing APP polymer 3mm thick even membrane weight not less than 3.00 Kg/Sqm duly sealed with 100mm wide sealing tape incl applying a coat of aluminium paint over a coat of cold emulsion primer at over laps joints with flame (complete by torch application) all as per manufacturer's instructions, and all as specified and as directed. |
| 27 | Chipping of loose/ damaged / cracked / previously repaired/ delaminated or weak concrete by chieseling to expose the sound core concrete where ever required and to expose rusted reinforcement upto depth n.exc 50mm and disposal of rubbish off the premises to a distance not exc 50 mtrs including cleaning of reinforced concrete surface by air compressor complete all as specified and as directed .Note: The work shall be carried out at a height of 7 mtr from Ground level. |
| 28 | M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height up to 3rd floor levels, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and as directed .Note: The work shall be carred out at height varying from Ground level to 7 mtr height to roof levels. |
| 29 | M&L for weld-mesh of size 50x50x3mm to be wrapped on the exposed surface of rib of beam, on the slab bottom etc and tack welding to the exposed reinforcement at close intervals and gunite with cement mortar 1:3 mixed with admixture Sika Plasto creat plus or equivalent make in Fosroc / Themax as per manufacturer's instructions as approved by GE around rib of beam or roof slab of thickness n.exc 40mm to be applied under an operating pressure. The gunited surface to be cured properly for a min of 7 days all in complete as per the technical specifications and manufacturer's instructions and all as specified and as directed. The work shall be carried out at height varying from Ground level to 7 mtr height to roof levels. |
| 30 | Providing and fixing water tight centering & shuttering and scaffolding including bolting, strutting, propping etc. Including removal of form work from column, beam, slab and chajja etc.complete all as specified and as directed. Note: The work shall be carried out at height varying from Ground level to 7 mtr height to roof levels. |
| 31 | M&L for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and as directed. |
| 32 | M&L for Mild steel TMT bars 5 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips,complete all as specified and as directed. |
| 33 | Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 34 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep as in foundation, etc, and getting out in soft/loose soil complete all as specified and directed. |
| 35 | M&L PCC type D2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete all as specified and as directed. |
| 36 | M&L 40mm thick damp proof course in CM (1:2:4 ) type B0 to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed. Note:- (WPC shall be measured & paid seperately as per manufacturer's instructions as printed on the container.) |
| 37 | Returning filling in including spreading leveling watering and well ramming in layers n.exc 25 cm for soft/loose soil complete all as specified and directed. |
| 38 | Removing excavated soils to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 39 | Use and waste of formwork to rough finished flat surfaces of chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed. |
| 40 | M&L for reinforced cement concrete nominal mix Type B1 1:2:4 (20 mm graded aggregate) for chajja/sunshade over window and doors including complete all as specified and as directed. |
| 41 | Use and waste of formwork to rough finished flat surfaces, sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 42 | M&L for reinforced cement concrete nominal mix Type B1 1:2:4 (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 43 | Use and waste of formwork to rough finished flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed. |
| 44 | M&L for reinforced cement concrete nominal mix Type B1 1:2:4 (20 mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies , deck slabs and in the shelves and the like and all other similar works complete all as specified and directed. |
| 45 | M&L broken stone or boulders for hard core of guage n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 46 | M&L for 75 mm thick cement concrete 1:4:8 type D2, using 40mm graded stone aggregates as sub base to floor, complete all as specified and directed. |
| 47 | M&L for 25 mm thick cement concrete 1:2:4 type B1, using 20mm aggregate as in leveling course complete all as specified and directed. |
| 48 | M&L for non skid ceramic jointless tiles (coloured) 1st quality, 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:4 as in floors complete all as specified and as directed. |
| 49 | M&L for coloured glazed ceramic tiles in vertical surfaces such as dado, skirting and riser to steps etc. of size 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat of 10 mm thick cement mortar 1:3 complete all specified and as directed. |
| 50 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20 mm bore pipe complete accesorries, complete all as specified and as directed. |
| 51 | S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and connection complete for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 52 | S&F 3- layer PP-R Polypropylene random copolymer) 20mm outer dia concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded fitting polypropylene laid in floor/wall/ceiling complete all as specified and directed.Note : Work will be done under authorised company supervision complete all as specified and directed. |
| 53 | S&F gun metal globe gate valve 20 mm bore complete all secified and complete all as specified and as directed. |
| 54 | S&F 110mm bore PVC (SWR) pipes in any length jointed with solvent cement joints / rubber ring joints fixed to walls with necessary clamps as in RWP pipes complete all as specified and directed. |
| 55 | S & F 110 mm dia PVC (SWR) pipes,single sockets, in any length with sealant rubber ring joints in floors and in trenches complete all as specified and as directed. |
| 56 | S&F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed. |
| 57 | S&F PVC (SWR) junction, single, (single T) equal or unequal 110mm bore complete all as specified and as directed. |
| 58 | S&F 75 mm dia, PVC (SWR) pipes, single socketed, in any length with sealant rubber ring joints fixed to walls including necessary nails, plugs and holder bats etc complete all as specified and as directed. |
| 59 | S&F 75 mm dia, PVC (SWR) pipes, single socketed, in any length with sealant rubber ring joints in floors and in trenches complete all as specified and as directed. |
| 60 | S&F 75 mm bore, PVC (SWR) bends provided with access door of any radius complete all as specified and as directed. |
| 61 | S&F 75 mm bore PVC (SWR) junction, single, (single T) equal or unequal complete all as specified and as directed. |
| 62 | M&L 75 to 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and as directed. |
| 63 | M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 64 | S & F vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and seat cover with Mild steel chromium plated hinging device complete all secified and as directed. |
| 65 | S&F 15 mm CP 2-in-1 stop cock/bib tap fancy type for fixing of health faucet or jet spray for the WC and complete all secified and as directed. |
| 66 | S & F 15 mm bore chromium plated fancy type bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 67 | S&F 15mm bore stop valves/angle valve, fancy type, chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and as directed. |
| 68 | S&F Brass SS Jet Spray with 1 m PVC tube and complete all as specified and as directed. |
| 69 | S&F health faucet 15mm bore with 1.0 m tube & hook (Braided tube) complete all as specified and as directed. |
| 70 | S&F 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified and as directed. |
| 71 | S & F Vitreous China wash basin, white, flat back, size 630 x 450mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 72 | S&F fancy type swan neck tall body pillar tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and as directed. |
| 73 | S& F 32 mm waste fitting, brass, chromium plated for glazed ware sinks, basins, etc. with long scewed shanks and fly-nuts, flange end bedded in read lead cement and other end fixed complete all secified and as directed. |
| 74 | S&F 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and as directed. |
| 75 | S&F 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm sq fixed complete for WHB waste water drain to walls,ceilings or in floors etc., including cutting chases, pinning for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 76 | S&F 32mm Bottle trap of PTMT for WHB/Kitchen sink etc.. having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and as directed. |
| 77 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 78 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 79 | S&F 15 mm fancy type, chromium plated with long shank and cup (concealed type) Stop valves, cast copper alloy, screwed down, high pressure screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 80 | S&F brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and as directed. |
| 81 | S&F corner glass shelf 300mm (with brass brackets) complete all as specified and as directed. |
| 82 | S&F Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 83 | S&F SS, premium type, peg set 6 heavy weight complete all as specified and as directed. |
| 84 | M & L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) and finished fair and even without using extra cement on ceiling complete all as specified and as directed. |
| 85 | M&L for preparing newly plastered surfaces of walls and applying one coat of distemper oil emulsion over Chalk whitning, on plastered surfaces, preparatory to distempering complete all as specified and as directed. |
| 86 | M&L preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat alkali resistant primer complete all as specified and as directed. |
| 87 | M&L 18 to 20mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Marble/granite including moulding to the edges to shape of bull nose complete all as specified and as directed. |
| 88 | Labour only for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 89 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed. |
| 90 | Supply and fixing factory made single extruded WPC (wood polymer composite ) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade ),calcium carbonate and natural fibres (wood powder/rice husk /wheat husk )and toxic additives (maximum toxicity index of 12 for 100gms ) having miniumum density of 650 kg/cum and screw withdrawl strength of 1800N (face) & 900N (Edge), miniumum compressive strength 50N/mm2, modulus of elasticity 850 N/mm2 and resisitance to spread of flame of class A category with property of being termite / borer proof ,water/moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screws complete all as specified and as directed. |
| 91 | S&F 30 mm thick, factory made wired mesh solid WPC (Wood Polymer Composite) shutter of consisting density of 600kf /Cum and door to be panelled with SS Mosquito proof mesh and XTN aluminium mesh for addtional strength supplied complete all as specified and directed. |
| 92 | S&F 140 mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 93 | S & F 20mm dia curtain rails, mild steel, chromium plated with fixing fancy type brackets/holders/wall to wall holder where ever required and of fancy decorative type domes ball on each side complete all as specified and as directed. |
| 94 | S&F Aluminium (extruded section) door closer hydraucally regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight bettween 61 to 80 kg and fixed, complete all as specified and directed. |
| 95 | S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified and as directed. |
| 96 | S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified and as directed. |
| 97 | S&F stainless steel butt hinges of size 100mm medium weight, cold fixed with stainless steel screws complete all as specified and as directed. |
| 98 | S&F Powder coated aluminium frame for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed complete all as specified and as directed. |
| 99 | S&F powder coated anodised aluminium for windows/ventilators for side hung, top hung, sliding shutter including all necessary fittings/parts for sliding portion or for fixed partition, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, tower bolts 02 Nos, handles 02 Nos in each shutter, hinges, anodised aluminum snap beading screws etc. including provision for cooler/AC/exshaust fan opening as per neccesary direction and complete all as specified and as directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately. |
| 100 | S & F 3 mm thick sheet glass with ground or obscured or frosted on one side, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 101 | M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) including use and waste of formwork complete all as specified and directed. |
| 102 | M&L for Machine pressed precast conctete coloured interlocking paver block any shape and size fixed with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed. |
| 103 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 104 | M&L for providing precast cement concrete set in cement mortar (1:4) Type C1 1:3:6 (20mm graded aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed. |
| 105 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub-bases of floors finishing cement concrete surface all as specified & directed complete all as specified and directed. |
| 106 | M&L for 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes complete all as specified and directed. |
| 107 | M&L for rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles as directed. |
| 108 | M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed. |
| 109 | M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed. |
| 110 | S&F MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to I.S.I 1161-1998 Grade St-240 with one shop coat of zinc chromate primer paint complete all as specified and directed. |
| 111 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self taping screws complete all as specified and as directed. |
| 112 | S & F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/clading to wall/eaves board, fixed with self taping screws complete all as specified and as directed. |
| 113 | S&F for GI frame work for ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre with GI Cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 45mm ceṇtre including 4mm thick non asbestos fibre cement building E boards fixed or laid/inserted to GI framework with screws for fixing in 600 mm x 600 mm grid, complete all as required at site complete all as specified and directed. |
| 114 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening primer all as specified and directed. |
| 115 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification complete all as specified and as directed. |
| 116 | S&F factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification. |
| 117 | S&F 300 mm Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as specified and directed. |
| 118 | S&F steel ventilator with top hung shutter (ISI marked) including hinges steel peg stay complete all as specified and as directed. |
| 119 | S & F vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of cement concrete bedding, connection to trap and flushing pipe and vitreous china foot rest etc complete all as specified and as directed. |
| 120 | S&F vitreous China wash basin, white, flat back, size 630 x 450mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 121 | S&F steel water tubing and connection medium grade 15mm bore with all fitting fixed concealed to wall or in ceiling complete and making good surfaces with cement morter 1:3 complete all as specified and as directed. |
| 122 | S & F CP grating 100 mm dia with or without hole complete all as specified and directed. |
| 123 | S&F Rotational moulded polyethylene water storage tanks white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe complete all as specified and as directed. |
| 124 | S & F articles exc 5 Kg each cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and as directed. |
| 125 | M&L for 100mm thick cement concrete type D2, 1:4:8 using 40mm graded stone aggregates as sub base to floor, complete all as specified and directed. |
| 126 | M&L for coloured chequred tiles, glossy finish, 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & pigment, laid over & including 15mm thick screed bed in cement & sand mortar 1:4, complete, all as specified & as directed. |
| 127 | M & L for plain cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) cast in situ in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed. |
| 128 | Supply and fix factory made SRFC precast RCC manhole cover as required thickness not less than 50mm of size 1200mm x 600mm, edge of manhole cover to be locked with 1mm thick MS sheet complete all as specified and directed by Engr-in-Charge. |
| 129 | M&L rendering 15 mm thick in CM 1:4 on brick/ concrete/ stone wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed by Engr-in-Charge. |
| 130 | M&L for concrete bed to drain pipe of 200mm dia in PCC (1:3:6) type C2 incl packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engr-in-Charge. |
| 131 | M&L for reinforced concrete NP2 pipe of 200mm dia laid in trenches and jointed incl forming cradles & demolition of old RCC/SGSW pipes complete all as specified and directed by Engr-in-Charge. |
| 132 | M&L for PCC (1:2:4) tye B2 (using 12.5mm graded stone aggregate) in surface channel & drains complete all as specified and directed. |
| 133 | M&L for cutting into existing manholes for connectng new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate)smooth finished and reforming benching as required for 200 mm bore pipe complete all as specified and as directed. |
| 134 | M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl form moulds mitred, stoped end etc. complete all as specified and directed. |
| 135 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in soft/loose soil and removal to a distance n exc. 50mtr complete all as specified and as directed. |
| 136 | M&L cement concrete C2 1:3:6 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 137 | S&F post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all nessecary drilling bolting & riveting etc and similar work confirming to Fe.290 Gde E-165 complete all as specified and as directed. |
| 138 | S&F mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 30cm long & dia of neck in mm n exc. 12mm complete all as specified and as directed. |
| 139 | Supply only chain link fencing made out of GI wire dia not less than 3.15mm dia hot dipped galvanised iron wire mesh of any size made upto into mattress of cages complete all as specified and as directed. (Note: Weight of chain link fencing per sqm brought by the contractor which shall be fixed through a BOO.) |
| 140 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire etc. complete all as specified and as directed. |
| 141 | M&L for mild steel round bars 10mm dia, and over cut to length, bent to shape required, crancking, bending spirally for fencing and binding/fixing with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips all complete as specified and as directed. |
| 142 | S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and as directed. |
| 143 | M&L for 100mm thick cement concrete type B1, 1:2:4 using 20mm graded stone aggregates as sub base to floor, complete all as specified and directed. |
| 144 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed. |
| 145 | M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde E- 250) quality A complete all as specified and directed. |
| 146 | M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and directed. |
| 147 | M&L rendering 10 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed by Engr-in-Charge. |
| 148 | M&L for Machine pressed precast conctete coloured interlocking paver block glossy finish any shape and size fixed with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete all as specified and directed. |
| 149 | M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including modular press steel/Metal flush box and cover Plate, complete, all as specified & directed. |
| 150 | All as per item No. 150 above but one Fan/exhaust fan point controlled by one Number one way switch complete all as specified and directed. |
| 151 | All as per item No. 150 (here-in-before) but for one 6 Amp socket outlet on independent board controlled by one Number one way switch on independent board. |
| 152 | All as per item No. 150 (here-in-before) but for one 6 Amp socket outlet on the same board controlled by one Number one way switch on same board. |
| 153 | All as per srl item No. 150 (here-in-before) but for 16 Amp socket out let by using 2.50 sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed. |
| 154 | S&F 1 modular switch 1 way 6 Amp, 230V 1 module all as specified & directed. |
| 155 | S&F 1 modular switch 1 way 16 Amp, 230V 1 module all as specified & directed. |
| 156 | S&F 2 modular Socket, 6A - 2/3 pin combined 230 volts AC complete all as specified & directed. |
| 157 | S&F 2 modular Socket 6A/16A - 2/3 pin combined, 230 volts AC complete all as specified & directed. |
| 158 | S&F 2 modular Ceiling fan regulator, 230V suitable for 1200mm/1400mm ceiling fan etc complete all as specified and directed. |
| 159 | S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed. |
| 160 | S&F LED light fitting 1x40W, regal batten for LED including ultra bright glass LED Tubelight with very high efficacy, single / double side connection all as specified and directed. |
| 161 | S&F LED light fitting 10 W, regal batten for LED including ultra bright glass LED Tubelight with very high efficacy, single / double side connection all as specified and directed. |
| 162 | S&F Building security light LED light fitting 35 watt, pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed. |
| 163 | S&F MCB single pole, C curve, 240 volts, 10 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed. |
| 164 | S&F MCB SPN, C curve, 240 Volts, 40-63 Amps breaking capacity 10 KA complete all as specified and directed. |
| 165 | S&F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed. |
| 166 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 3 of SSR Part-complete all as specified and directed. |
| 167 | Supplying, laying, jointing, testing and commissioning of LT UG XLPE cable size 10 sqmm 2 core insulated screened PVC beded galvanised steel strip or wire armoured electric power (heavy duty) with aluminium conductor 1100 volts grade complete of all as specified and directed. (Note :- Cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc complete all as specified and directed by Engr-in- Charge. |
| 168 | Supply and laying double wall corrugated pipe (DWC) confirming to IS 19430 Part -I of size 50mm outer dia and 38mm inner dia complete all as specified and as directed. |
| 169 | Excavation in trenches in soft/loose/hard/dense soil n exc 1.50 meter wide and n exc 1.50 meter in depth for foundation of pole, laying cable etc and getting out etc complete all as specified and directed. |
| 170 | Supply and fixing ceiling fans (copper winding) complete with blades, down rods and accessories, 230V, 1200mm sweep, min air delivery 210 CFM, BEE five star rated with brushless direct current motor(BLDC) with remote complete all as specified and directed. |
| 171 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 172 | Supply and fix electric water heater, storage type mild steel with glass lined coating (Outer Body) with Titanium armour technology inner tank coating for preventing corrosion rusting and heating element upto 2 KW capacity 25 litre, BEE 3 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. |
| 173 | Supply & laying 50 mm (1.5\\") dia GI pipe, medium class, supplied and laid including fittings complete all as specifiied and directed. |
| 174 | Supply & laying 25 mm (1\\") dia GI pipe, medium class, supplied and laid including fittings complete all as specifiied and directed. |
| 175 | Supply & fixing 50 mm (1.5'') dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 176 | Supply & fixing 25 mm (1'') dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 177 | M&L for brick masonry valve pit of size 60x60x60 cm (internal dimension of chamber incl plastering internal and flush pointing external as the work proceeds in same mortar complete with MS sheet cover handle, packing arrangement, earth worth in any type of soil incl removal to n.exc 50 mtr and paint with 2 coats of synthetic enamelled paint over a coat of red oxide primer to steel surfaces complete all as specified and directed. |
| 178 | M&L for Bends, Tee pieces (single & double branch) MS febricated any dia incl any type of machine work and welding work and angle/redius and straight connecting pieces but all ends flanged pipes up to 150 mm bore. |
| 179 | M&L for point wiring with 1100 volts grade PVC insulated unsheathed FRLS single core multistranded copper conductor cable 1.5 sqmm (Phase-Red,Neutral-Black) and earth continuity conductor 1.5 Sqmm FRLS single core (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches. |
| 180 | M&L for submain wiring with PVC insulated FRLS multistranded copper conductor cable of size 2x2.5 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 2.5 Sqmm FRLS multistranded copper conductor cable as continuous earth wire complete all as specified and directed. (Note :- Two runs of 2.5 Sqmm copper wire and one run of 2.5 sqmm copper earth wire alongwith PVC conduit shall be meausred as one unit.) |
| 181 | S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 volts AC complete all as specified and directed. |
| 182 | Supply and fixing sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps complete all as specified and directed. |
| 183 | S & F lamp holder insulated polycarbonate body with back plate 230V AC complete all as specified and directed. |
| 184 | Supply and fixing steel exhaust fans 300 mm sweep refresh air DXW 230/240 volts, AC single phase with louver including cutting hole in the wall and making good the same as per existing surface complete all as specified & directed. Note :- (i) Cutting & making to 250-300mm dia hole for exhaust fan with and including fixing 1mm thick MS ring of suitable size at the edge of cutting holes including making good disturbed surfaces by using cement mortar (1:4) mixed to match the existing surface complete to the entire satisfaction of Engineer-in-charge.(ii) Cost of cutting of hole and MS ring included in the unit rate of this item and nothing extra is payable on this account. |
| 185 | Supply and fix LED bulb of capacity 9 W with minimum output 120 luminaire per watt suitable for holder 230 V AC all as specified and directed. |
| 186 | Supply & Fixing LED light Fitting 20 W, regal batten for LED including ultra bright glass LED tubelight with very high efficiency single/double side connection all as specified and directed. |
| 187 | S&F factory made, sheet metal enclosure distribution boards double door powder coated, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar, SP& N 4 Ways complete all as specified and directed. |
| 188 | S & F MCBs SPN 32 amps having rupturning capacity 10 KA, IS-8828 marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed. |
| 189 | Supply and fixing for CPVC tubing medium grade including all fitting of size 15mm bore complete all as specified and directed by Engr-In-Charge. |
| 190 | Supply and fix PVC connection pipe 600mm long with PTMT nuts at both ends suitable for hot and cold water for geyser complete all as specified and directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
