|
| 1 | Dismantling of galvanized mild steel two strand barbed wire from all existing mild steel post, RCC fencing post etc. complete all as specified and directed. |
| 2 | Dismantling of fencing, wire mesh of any type and in any position by unscrewing nuts fillets, clamps complete all as specified and directed. |
| 3 | Dismantling posts or strut (steel or RCC fencing posts) any section and taking out embedded portion (post embedded in natural ground) including making good to disturbed ground surfaces complete all as specified and directed. |
| 4 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed. |
| 5 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 6 | Demolition of cement concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) all as specified and directed. |
| 7 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 8 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed. |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 10 | Demolition and breaking up drain pipes (salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar of internal dia 75-110mm including any earth work and demolition of PCC complete all as specified and as directed. |
| 11 | Dismantling of old Ceiling boards (Fibre,pulp,insulation,etc) or insulation boards /slabs blankets,including cover fillets and frame work all as specified and directed. |
| 12 | Excavating in post holes (or similar holes) in soft/loose soil each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and directed. |
| 13 | M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 14 | M&L for plain cement concrete 1: 4 :8, type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 15 | M&L for precast cement concrete type C1 1:3:6 (using 20 mm graded stone aggregate) block masonry with solid blocks exc 10cm in width and setting in CM 1:6 complete all as specified and directed. |
| 16 | M&L for providing reinforcement cement concrete type B1 1:2:4 (20mm graded stone aggregate)(Nominal Mix) as in Slabs supported on walls, manhole cover, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 17 | Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B0) using 12.5 mm graded aggregate, depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed. |
| 18 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; exc. 200m thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed. |
| 19 | Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed. |
| 20 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm complete all as specified and directed. |
| 21 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed. |
| 22 | S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelaminated PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including necessary fittings etc complete all as specified and directed. |
| 23 | S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. |
| 24 | Taking down door chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed. |
| 25 | Taking down shutters of any description exc 2 Sqm each and refixing in the same opening after necessary easing and cutting complete all as specified and directed. |
| 26 | S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 27 | S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 28 | S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) and fitted to chowkats complete all as specified and directed. |
| 29 | S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and directed. |
| 30 | S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section all as specified and directed. |
| 31 | S&F for aluminium anodised, barrel tower bolt 150mm of extruded section all as specified and directed. |
| 32 | S&F for aluminium handle 150mm cast type anodised all as specified and directed. |
| 33 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed. |
| 34 | S&F 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 35 | S&F Continuous(piano) hinges, mild steel, bright finish of electrogalvanised 30 mm width of flap complete all as specified and directed. |
| 36 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate all as specified and directed. |
| 37 | S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed. |
| 38 | S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 39 | S&F posts and struts in fencing including cutting tops to shapes as directed, drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc including all necessary drilling, bolting or rivetting etc and similar work confirming to Fe-290 Gde E-165) complete all as specified and directed. |
| 40 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screw end to be fitted with washers and one hexagonal or square nut, diameter of bolts 12 mm, length of bolt exc. 5cm not exc. 10 cm long, complete all as specified and as directed. |
| 41 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and as directed. |
| 42 | Supply only Chain Link MS galvanised fencing, any size or type, complete all as specified and as directed. |
| 43 | S&F Mild steel round bars 10 mm dia, Fe 290, Grade E-165, cut to length, bend to shape required and hooking ends for fixing to chain link fencing complete all as specified and as directed. |
| 44 | S&F galvanized 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pin etc. as directed (each line wire to be measured) complete all as specified and as directed. |
| 45 | Ditto item no 44 but except barbed wire incl Restraining & resecuring of existing barbed wire including making good staples etc complete all as specified and as directed. |
| 46 | M & L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging; also fastening and fixing conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed. |
| 47 | M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 48 | S&F mild steel work in tubular trusses including special shaped washer etc complete or butt welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed. |
| 49 | S&F Anodized aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging all as specified in SSR all as specified and directed.Note : Powder coating shall not be less than 50 Micron complete all as specified and directed. |
| 50 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 51 | S&F prepainted galvalume aluminium zinc coating based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fix with self tapping screws with necessary washers/welding all as specified and directed. (The profile of the sheet as specified and directed by Engr-in-Charge). |
| 52 | M&L in repairs Prelaminated particle board, 19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed. |
| 53 | M&L 12mm thick block boards fixed in repairs grade 2 quality, interior grade decorative type with decorative face veneer on one face, fixed with screws to timber frame work complete all as specified and as directed. |
| 54 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 55 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 56 | M&L for 75 mm thick Plain Cement Concrete 1:3:6 (using 40mm graded stone aggregate) type C2 as in plinth protection and paving finishing surface even and smooth without using extra cement all as specified and directed. |
| 57 | M&L for rubber moulded Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658 - 2006 of 60 mm thickness, M - 35 Grade with grey cement and pigment complete all as specified and directed. |
| 58 | M&L for 75mm thick Plain Cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as sub base of floor complete all as specified and directed. |
| 59 | M&L for chequered tiles of size 200x200x25 mm thick, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match with grey pigment cement and pigments complete all as specified and directed. |
| 60 | M & L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed bed in Cement Mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed. |
| 61 | M&L Vitrified ceramic light shade tiles of 10mm thick and area of each tiles not exceeding 0.36 Sqm for flooring including over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 62 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in flooring over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 63 | M&L Glazed coloured Ceramic tiles of size 450X300X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick plaster in CM 1:4 finished all as specified and directed. |
| 64 | M&L Glazed coloured Ceramic tiles of size 300X200X6 to 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick plaster in Cement Mortar 1:3 complete all as specified and directed. |
| 65 | M&L for Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 20mm thick screed bed in CM 1:6 all as specified and directed. |
| 66 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement complete all as specified and directed |
| 67 | Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description complete all as specified and directed. |
| 68 | M&L for 15mm thick Screed bed or bedding layer of mortar in Cement Mortar 1:6 for laying floor finish. |
| 69 | M&L 15mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall all as specified and directed. |
| 70 | M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls all as specified and directed. |
| 71 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint including priming the surfaces with alkali resistant priming paint complete all as specified and directed. |
| 72 | M&L for preparation of surface and applying two coat of White wash on old wall surface complete all as specified and directed. |
| 73 | M&L one coat of white washing on old decorated ceiling surfaces including preparation of surfaces complete all as specified and directed. |
| 74 | M&L for preparation of new surfaces of walls and applying two coat of oil bound distemper (OBD) over one coat of primer complete all as specified and directed. |
| 75 | M&L for complete removal for existing surfaces of walls and applying two coats of oil bound distemper (OBD) including priming the surfaces with alkali resistant priming paint complete all as specified and directed. |
| 76 | M&L for preparation of existing surfaces of walls and applying one coats of oil bound distemper (OBD) complete all as specified and directed. |
| 77 | M&L for complete removal for existing surface finish and applying 1-2mm thick wall care putty on wall and ceiling surfaces complete all as specified and directed. |
| 78 | M&L for preparation of old decorated surfaces of wall and applying one coat of exterior emulsion paint complete all as specified and directed. |
| 79 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beads complete all as specified and directed. |
| 80 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 81 | S&F figured glass pin head type 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 82 | S&F sheet glass ordinary quality 4.8mm thick as in window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprene gasket complete all as specified and directed. |
| 83 | S&F sheet glass ordinary quality 4mm thick as in window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprene gasket complete all as specified and directed. |
| 84 | M&L for Preparing old painted steel surface and applying one coat of Synthetic enamel Paint complete all as specified and directed. |
| 85 | M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 86 | M&L for Preparing old painted wooden surface and applying one coat of Synthetic enamel Paint complete all as specified and directed. |
| 87 | M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 88 | Taking up or down 15mm steel tubing and connections complete all as specified and directed. |
| 89 | S&F 20 mm outer dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed. |
| 90 | S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe complete all as specified and as directed. |
| 91 | S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with pedestal including brackets complete all as specified and as directed. |
| 92 | S & F in repairs Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” complete all as specified and directed. |
| 93 | S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed. |
| 94 | S&F in repairs 32/40mm waste pipe for wash hand basin complete all as specified and directed. |
| 95 | S&F in repairs Bib taps chromium plated 15 mm dia with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 96 | S&F in repairs Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified and directed. |
| 97 | S&F in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 98 | Taking up or down 25mm steel tubing and connections complete all as specified and directed. |
| 99 | S&F 25 mm outer dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed. |
| 100 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 101 | S&F plastic pedestal pattern seat cover with flat bottom and cover and MS chromium plated hanging type device complete all as specified and directed. |
| 102 | S&F in repairs vitreous China squatting pan 'orissa' pattern white colour of size 580x440mm with integral foot rests including p'trap and provision of cement concrete for good making surface complete all as specified & directed. |
| 103 | S&F in repairs for vitreous china Under Counter sunk Modular wash basin white flat back size 190x550x430mm including fixing of 32mm low density polyethylene pipes (LDPE) of pressure rating 6kg/cm2, coupling, complete all as specified and as directed. |
| 104 | S&F in repair Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with brackets and union for discharge pipe complete all as specified and as directed. |
| 105 | S&F in repairs bib tap of PTMT any colour 15mm dia complete all as specified and as directed. |
| 106 | S&F in repairs sink cock fancy type (table mounted) with 215 mm swivel spout complete all as specified and as directed. Make - Cera F2003302 or its equivalent in PS. |
| 107 | S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed. Make: Cera Model F2002161 or its equivalent in PS. |
| 108 | S&F in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 109 | S&F inrepairs PVC bathroom Cabinet mirror of size 500x400mm complete all as specified and directed. Make- Prayag Cat No-556 or its equivalent in PS. |
| 110 | S& F in repairs Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed. |
| 111 | S & F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange complete all as specified and directed. |
| 112 | S&F in repairs CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats complete all as specified and directed. |
| 113 | S&F in repairs of 15mm dia CP health faucet of including necessary holding arrangements with screws etc all as specified and directed of Cera Make-F-8030103 or its equivalent as per PS. |
| 114 | S&F in repairs Corner Glass shelf including necessary holding arrangements with screws etc all as specified and directed. Make Cera Model F-5005102 or its equivalent as per PS. |
| 115 | S&F PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and as directed. |
| 116 | S&F PVC floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement complete all as specified and as directed. |
| 117 | S&F in repairs PVC(SWR) Pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed. |
| 118 | S&F in repairs PVC(SWR) Pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 119 | S&F in repairs PVC(SWR) Pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed. |
| 120 | S & F PVC (SWR) bends 75 mm dia in any radius with access door etc complete all as specified and directed. |
| 121 | S & F PVC (SWR) bends 110 mm dia in any radius with access door etc complete all as specified and directed. |
| 122 | S & F PVC (SWR) branch piece single 110mm diameter (single 'Y') equal or unequal with access door including creating necessary provn in the existing PVC waste including jointing with rubber washer and solvent clamps etc. complete all as specified and directed. |
| 123 | S&F in repairs CP grating size 100mm dia complete all as specified and directed. |
| 124 | S&F in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm complete all as specified and directed. |
| 125 | M&L Making V groove of 10mm wide and 30mm deep or upto the extend of joint/crack present at site over joint/ crack line using electricity operated angle grinder with diamond concrete saw blade and cleaning it by air blower as directed by Engineer-ln-Charge. The groove shall be cut on the concrete surface along the joint/crack over RCC structure to be repaired complete all as specified and directed. Note: Work to be executed by the authorized applicator of manufacturer only complete all as specified and directed. |
| 126 | M&L for Drilling Holes of 12mm dia up to 100 mm deep holes in structural members at the interval of 300 mm in staggered manner or along the joint & crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive SikaDur 31 or equivalent to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, levelling and finishing the external surface, after completion of the work, etc. complete all as specified and directed. |
| 127 | M&L Sealing of exposed 'V' groove of 10mm wide and 30mm deep with Sikagard 694 F(l) or Quick Fix or equivalent solvent-free, moisture tolerant, thixotropic, two part structural adhesive and repair mortar cum surface levelling mortar.Note: Work to be executed by the authorised applicator of manufacturers only complete all as specified and directed. |
| 128 | M&L for injection grouting of construction joints with non shrink cement slurry admixed with epoxy grouting Cebex 100 of M/S Fosroc Chemical /SikaGrout -214 IN @ 300 mm C/C including of opening of cracks to a groove of size 12mm X 12 mm, Nozzle at 300 mm C/C including of opening of cracks to be grooved of size 10mm X 10mm fixing of nozzles with fast setting plugging compound Renderoc plug, cutting the extra length of nozzle after grouting all in complete as per manufacturers instructions including necessary scaffolding as required and as per the directions of Engineers incharge complete all as specified and directed Seal the nozzle with Sikagard 694 F(l) or equivalent thixotropic epoxy putty after the refusal of grout material from the nozzle. Note: leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as specified and directed. |
| 129 | M & L Providing & Applying Two coats of SikaTopseal 107 or Aqua Arm Top Guard inside of the wall & floor of the tank, a two components ready to use polymer modified cementatious coating . First Coat should be applied horizontally and use Glass fibre net over the cracked surface and apply 2nd and 3rd coat of same acrylic coat over the glass fibre net, second coat should be applied vertically and 3rd coat will be horizontal. thickness of coating shall not be less than I .5mm complete all as specified and directed. |
| 130 | M & L Applying two coats Sikagard 67 or AquArm Tank Coat, a water based epoxy coating certified for portable water on all over the concrete surface from inside. Apply the first coat by brush allow it to dry for 6-8 hrs and then apply 2nd coat and allow it to cure complete 24 hrs The coating shall be applied using brush application. The Thickness after two coating should not be less than 500 microns complete all as specified and directed. Note for item No 125 to 130 : - (i) The Rate inclusive of scaffolding, ladders, plant and templets whatever required to execution the work and water testing to be done as per the direction of Engr-in-charge. (ii) Contractor shall submit 10 years of leakage proof guarantee as per PS. (iii) Work will be executed as per the authorised applicator. |
| 131 | S&F of Armstrong Board 9mm thick in ceiling fixed with screws all complete as per manufacturer’s instructions complete all as specified and directed. |
| 132 | M&L for repairing of 40mm thick flooring in patches with Plain Cement Concrete 1:2:4 (with 20mm graded stone aggregate) finished even & smooth w/o using extra cement. The rates include demolition of existing concrete complete all as specified and directed. |
| 133 | S&F in repairs Decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia complete all as directed and specified. |
| 134 | S&F decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete all as directed and specified. |
| 135 | S&F for pully operated clothes drying system pully it 6 feet(with 4 pipes) consisting of four anodized aluminium pipes each of outer Dia 22mm and inner Dia 19.80 mm and pully made up of Delrin with rope guide mounted on channel pair of length 24\\"(distance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self tapping screws provided with kit rope will be polyester braided undyed of 3.5+0.50 mm Dia complete all as specified and as directed. |
| 136 | S & F Wall mounted stand consisting of four anodized, Aluminium pipes, each of outer dia 22mm and inner dia 19.8mm, mounted on anodized aluminium angle of size 30 x 30x3 mm, Model- Mount it 20-4 pipes, 5 ft each complete all as specified and directed. |
| 137 | M & L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and tne prelaminated side with different design and other side plain wihte of density not less than 600kg/cum the 18mm board should be 100% lead free, water proof, termite proof and moisture/weather proof and good screw holding capacity including all fitings complete all as specified and directed. Make - BLACK COBRA /SMP IMPEX or its Equivalent in PS). |
| 138 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 10 cm complete all as specified and directed. |
| 139 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 15 cm complete all as specified and directed. |
| 140 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 20cm complete all as specified and directed. Please Enable Macros to View BoQ information |
