|
| 1 | B/R PORTION Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed. |
| 3 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each all as directed. |
| 4 | Taking down shutter and re-fixing in the same opening after necessary repair like easing etc. area exc 1 sqm but not exceeding 2 sqm each completed all as specified and directed. |
| 5 | S&F for 2nd class HW, plain, solid, straight chowkats and frams, wrought, framed, rebated on the solid, moulded or chamfered, put together with glue, pinned at joints complete all as directed. |
| 6 | S&F 35mm thick Factory made 2nd class hard wood glazed & skleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as directed. |
| 7 | S&F Factory made 35mm thick with 2nd class hard wood, rail and style factory made plain framed panelled shutter(two panel) with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated. |
| 8 | S&F in repair 30mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides completed all as specified and directed. |
| 9 | S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instrutions completed all as specified and directed. |
| 10 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 11 | S&F 4.80 mm thick tinted/frosted glass/ Selected quality glass fixed in aluminium / Upvc beads (beading included with shutter ) and similar work including cutting to shape , drilling holes as required complete all as specified and as directed, |
| 12 | S & F solar control film 25 micron reflective type (garware sun control or equivqlent ) complete all as specified and directed . |
| 13 | S&F anodised powder coated anodised aluminium doors frame for doors, windows, ventilators and partition with one or more rebates ncluding necessary jointing cleats, glazing clips rubber packing cleat for fixing etc complete all as specified. |
| 14 | S&F powder coated anodised Anodised aluminium window and ventilator shutters, fixed type without sash bar in two or three track window or in fixed type ventilator , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangement for both sliding shutter etc with 4.80 mm thick glass ordinary quality. complete all as specified.(NOTE: Glass and wire mesh shall be paid seperately ) |
| 15 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber packing handle 2 Nos in each door, hinges, in each door, anodised aluminium snap beading screws etc with 4.80 mm thick glass ordinary quality as per manufactures instruction complete all as specified and directed. (NOTE: Glass shall be paid seperately ) |
| 16 | S&F in repair Mortice latch lock with two levers (vertical type), mild steel body and fixed in aluminium door completed all as specified and directed. |
| 17 | S&F in repair Anodied aluminium grill ( anodised transperant or dyed to required to IS: 1868 with minimum anodic of coating of grade AC15) of approved desingn /pattern with approved standered section and fixed to the existing window frame with C.P proper opening size for fixing and operation of handles and fixing proper opening size for fixing and operations of handles and fixing approved aluminium standered section around the opening all complete as all as per requirment and direction of enginner in charge. |
| 18 | S&F stainless steel wire cloth, 0.65 mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed. |
| 19 | All as per item No 18.00 above but fixed in repair. |
| 20 | Hacking out old broken glass (any thickness and size or quality) from wooden frames glazed with putty or fixed with beads completed all as specified and directed. |
| 21 | . All as per item No 20.00 above but from metal frame. |
| 22 | S&F 3mm thick ordinary quality sheet glass/frosted glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as directed. |
| 23 | S&F 150mm aluminium anodised barrel tower bolts of extruded section completed all as specified and directed. |
| 24 | All as per item No.18 here-in-before, but 200mm long all as directed. |
| 25 | S&F 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed complete all as directed. |
| 26 | . All as per item No 25.00 above but fixed in repair. |
| 27 | S&F 100mm butt hinges stainless steel medium weight completed all as specified and directed. |
| 28 | .All as per item No 27.00 above but 75mm completed all as specified and directed. |
| 29 | S&F aluminium handle, cast type anodised 125mm size all as directed. |
| 30 | All as per item No 29.00 above but 150mm. |
| 31 | S&F 25 mm dia brass decorative type curtain rod alongwith and supports and rings at a gap of 4\\" completed all as specified and directed. |
| 32 | S&F Brass decorative bracket for fixing curtain rod fixed to wall with screw,nails etc complete all as specified and directed. |
| 33 | S&F 1mm to 2mm thick sunmica fixing to ply wood all as specified and as directed by Engineer-in-Charge. |
| 34 | S&F in repair 12 mm thick commercial type face plywood BWR grade type BB fixed with screws/nails to timber frame work all as specified. |
| 35 | S&F in repair 18-19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workfixed with screws/nails to timber frame work all as specified. |
| 36 | S&F Block boards 18 to 19 mm thick, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work( as in cup board) INCL taking down old one. |
| 37 | S&F in repairs Door closer hydrau- lically regulated ( Aluminium extruded section) designation No. 2 universal type, suitable for door shutters of upto 851 mm in width and of weight between 36 to 61 Kgs all as spd and directed. |
| 38 | S&F in repair drawer knobs 40 mm dia of brass polished fixed with nut screw and washer all as directed. |
| 39 | M&L in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass, other part made of mild steel heavy duty all as directed including taking down old one. |
| 40 | S&F in repair for 300mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as directed. |
| 41 | S&F in repair of 2 mm thick fibre glass reinforced transluent corrugated or plain coloured/printed sheeting with two corugation side lap fixed with coach screw and washer in roof , wall etc complete all as directed. |
| 42 | M&L in repair 18 to 20 mm thick black/coloured granite machine cut laid over 10mm thick screed bed and jointed with grey or coloured cement to match with admixture of pigment to match the shade of granite including cutting polishing all as specified and as directed. |
| 43 | Demolition of cement concrete in ground floor and paving n.exc 15 cm thick below or above GL complete un re-inforced all as specified and directed. |
| 44 | M&L for 75mm thick PCC(1:3:6) type 'C-2' (using 40mm graded crushed stone aggregate) as in sub base of concrete finished even and smooth without using extra cement complete all as directed. |
| 45 | M&L for 25mm thick PCC(1:2:4) type 'B-1' (using 20mm graded crushed stone aggregate) as in floor padding finished fair and even without using extra cement complete all as a specified and as directed. |
| 46 | Dismentling structural steel work including doors, gates but excluding framed truss etc completed all as specified and directed. |
| 47 | Steel Tubular roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc completed all as specified and directed. |
| 48 | S&F plates (plain or chequered) channels, square cut or notched (ordninary and counter sunk) forming holes, without any attachment all as specified rolled mild steel in stairs ( framed) including stringers, treades landing, balusters, hand rails etc including cleats, brackets etc complete all as specified and as direceted by Engr-in-Charge. |
| 49 | Dismantling of Asbestos cement corrugated, semi-corrugated sheet in roof covering completed all as specified and directed. |
| 50 | S&F pre - painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified. |
| 51 | M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 52 | Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing,dressed stone work and precast concrete articles complete all as directed. |
| 53 | M&L brick work with Fly ash bricks, straight or curved on plan exc 6m radius buit in CM 1:6 complete all as specified and directed. |
| 54 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete All as specified and as directed. |
| 55 | M&L 15mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:6 complete all as directed. |
| 56 | M&L 15 mm thick cement plaster in CM (1:4) on fair faces of brick work incl finished even and smooth without using extra cement complete all as specified and directed. |
| 57 | M&L 5 mm thick cement plaster on ceiling surfaces without using extra cement finishing fair and even in CM 1:3 including necessary scaffolding complete all as directed. |
| 58 | Demolition of stone slabs and tiles of any description or thickness in floors / vertical surfaces, including screed bed on floor / backing layer of screed on vertical surface etc laid, bedded and pointed in any mortar, etc complete all as specifed and directed. |
| 59 | S&F Non skid ceramic tiles 400x400x7to 8 mm thick coloured tiles as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over screed bed 15 mm thick CM 1:6 all as directed. |
| 60 | S&F Non skid ceramic tiles 600x600x7 to 8 mm thick coloured tiles as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over screed bed 15 mm thick CM 1:6 all as directed. |
| 61 | S&F glazed ceramic colour tile of size 300 x 200x 6 to 7 / 350x 250x 7 / 450 x 300 x7 mm thick as in skirting and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing layer bed of 10 mm thick CM(1:6) completed all as specified and directed. |
| 62 | M&L Non Skid joint free coloured tiles 7-8mm thick area of each tiles exc 0.06Sqm buy n. exc 0.11 sqm (300X300X7-8mm),as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bedding in CM 1:6 completed all as specified and directed. |
| 63 | M & L Virified colour (light shade) Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over screed bed 15 mm thick CM 1:6 all as directed . |
| 64 | S&F in repair Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions including taking down old tarfelt, complete all as specified and as directed :-(a) Rendering 10mm thick in Cement Mortar 1:4, finished even and smooth and cured for 07 days by Ponding of water over Roof.(b) Preparing fully dried plastered surface as per IS:3067-1966, for further treatment.(c) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.3 Litre per Sqm.(d) Applying a layer of APP based Polymeric Membrance; 3.0mm thick (minimum) weighing 3.50 Kilogram per Square Metre (reinforced) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction.(e) Applying one coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane. |
| 65 | M & L 25mm thick cement concrete as in roof pading type B-0,1:2:4 (12.5mm graded aggregate finished cement concrete surface even and smooth without using extra cement |
| 66 | Supply only liquid water proofing compound. Please Enable Macros to View BoQ information |
| 67 | Supply only liquid water proofing compound. Please Enable Macros to View BoQ information |