|
| 1 | Supply and fixing sign board i/c letter writting all comp. |
| 2 | Excavation in foundation in moorum mixed soil (in Bundelkhand area) including lift upto 1.5 m. and lead upto 30 m. and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge a distance of 30 m. from the foundation trenches. |
| 3 | Cement concrete in 1:6:12 with cement, sand and (22.40-53) mm granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of the work . |
| 4 | M 150 brick work in 1:4 cement and fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, labours and T&P etc. required for proper completion of the work . |
| 5 | Cement, concrete with 1:2:4 cement, coarse sand and approved 20 mm. gauge granite stone grit including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 6 | 12 mm. thick plaster in 1:4 with cement and fine sand of 1.25 F.M. mortar including supply of all materials, labours and T&P etc. required for proper completion of the work . |
| 7 | R.C.C. with 1:1½:3 cement, coarse sand and approved 20 mm. gauge granite stone grit including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 8 | Mild steel or iron work in reinforcement such as R.B.or RCC work. |
| 9 | Earth work in cutting in moorum mixed soil (in Bundelkhand areas,requiring use of special T&P such as pick axes and sabbals etc) excavation to be in the form of regular pits not exceeding 1/2 meter(20\\") in depth including ramming and dressing the surface to required, levels and slopes and also including 1.5 m(5ft),lifts and 30m(100ft) lead The earth trom cutting to be used in making embankment or to be deposited as spoil banks within two km, distance including cost of royalty as directed by Engineer-in-charge. |
| 10 | Construction of Granular Sub Base (GSB) Providing, well materials , Spreading in uniform layer with motor grade on prepared surface making by mix in place method rotavator at OMC and compacting with smooth wheel roller to achive the desired density including all materials, labours T&P etc. required for proper completion of the work as per direction of engineer -in -charge and technical specification class 401 |
| 11 | Providing, laying Spreading and compacting stone aggregate of specific sizes to water bound macadom specification including spreading in uniform thickness hand packing ,rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber , apploying and brooming ,stone screening to fillup the interstices of coarse aggregate ,watering and compacting to the required density Grading 3 as per technical specification class 405 |
| 12 | Const of un-reinforce, and Expansion joint construction joint only pcc pavement thickness as per design over a prepared subbase with 43 grade cement or any other type as clause 1501.2.2 M-30 grade coarse and fine aggregate confirming to is 383 maximum size of coarse aggregate not exeding 25mm mixed in a concrete mixer of not less than 0.20 cum capacity and appropriete weigh batcher using approved mix design laid in approved fixed side formwork and fixing of 125 micron polythene film i/c the levelling the formwork as per drawing spreading the concrete with shovel, rakes ,compacting using needle ,screed and plate vibraters and finished in continious operation i/c provision of contraction expansion joint applying primer and curing compound and water finishing to lines and grade as per drawing and tachnical specification clause 1501. Please Enable Macros to View BoQ information |
