Tender For Special Repair To Bldg No P-88 Of Mtti Af Stn Avadi, Avadi-Tamil Nadu

TDR : 55508903

Tender Notice
BOQ

27 Days Left

Avadi , Tamil Nadu

Tender Brief : Tender For Special Repair To Bldg No P-88 Of Mtti Af Stn Avadi

Document Fees
₹ 2000 /-

EMD
₹ 454000.0 /-

Tender Value
₹ 3.79 Crore /-

Submission Date
12-06-2026

Competition Type
Indian

Bidding Type
Works

Need a Business Loan? Apply Now !


1	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed.
2	Roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust complete all as specified
3	Dismantling of Stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floors, apron etc complete all as specified and directed.
4	Demolition of cement concrete (unreinforced concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). Complected al as sepcified and directed.
5	Demolition of reinforced cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work. Complected al as sepcified and directed
6	Taking down plastering in cement or cement-lime mortar up to any height (one side only measured in cases where both sides are plastered) etc complete all as directed
7	Taking down chowkhats or frames with shutters and (without taking off shutters from frames) n.exc 1.5 sq. m each
8	Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each
9	Taking up or down steel tubing and connections, including removal to store etc all as directed for 15mm bore
10	Taking up or down steel tubing and connections, including removal to store etc all as directed for 20mm bore
11	Taking down PVC pipes / (any pipe of any size) or pattern incl all fittings, head shoes, bends swan necks etc including cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as directed.
12	Dismantling plain or corrugated steel sheeting any guage, thickness including Nainital or similar pattern roof covering, all as specified.
13	Dismantling wrought iron or mild steel work of any description complete all as specified`
14	Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, all as specified.
15	Demolition of stones or brick masonry or block walling, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc.complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed.
16	M&L for Brick work with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 (01 cement : 06 coarse sand) all as specified & directed.
17	M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 (01 cement : 04 coarse sand) all as specified & directed.
18	M&L Rendering 15 mm thick on fair faces of brick or concrete surfaces in CM 1:4 finished fair and even (external surfaces) all as specified & directed.
19	M &L Rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces).
20	M&L for Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed.
21	Preparation of new plastered or unplastered surfaces of walls plastered surfaces of walls surface smooth and applying two coat of exterior grade paint weather resistant over a coat of primer incl cleaning the floor/ joinery, surfaces glass pans finished smooth with sand paper complete all as specified and directed.Note:- Surface the preparation including scaffolding, cleaning and minor repairs deemed included.
22	M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.Note:- Surface the preparation including scaffolding, cleaning and minor repairs deemed included.
23	M&L for Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. Note:- Surface the preparation including scaffolding, cleaning and minor repairs deemed included.
24	M&L for complete removal of existing treatment of old surface including brooming down / steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and treating oil and greasy spots and cleaning with water on wall and preparation of plastered surface of walls and preparation of old plastered surfaces of walls surface smooth and applying two coat of exterior grade paint weather resistant over a coat of primer incl cleaning the floor/ joinery, surfaces glass pans all as directed. Note:- Surface the preparation including scaffolding, cleaning and minor repairs deemed included.
25	M&L for complete removal of existing treatment of old surface including brooming down / steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and treating oil and greasy spots and cleaning with water on wall and preparation of plastered surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer including wall care putty for smooth surface complete all as specified and as directed. complete all as specified and directed by Engr-in-charge.Note:- Surface the preparation including scaffolding, cleaning and minor repairs deemed included.
26	Material and labour for Preparation of old plastered or unplastered surfaces of ceilings including brooming down, steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash all as specified and as directed.Note:- Surface the preparation including scaffolding, cleaning and minor repairs deemed included.
27	M & L for RCC 1 : 1 1/2 : 3 using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.
28	M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge
29	M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge.
30	M & L for mild steel TMT bars 8mm dia and over upto including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge
31	M&L for Non-skid ceramic coloured tiles (matt finish), 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 square metre but not exceeding 0.11 square metre, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, grade B1 quality over and including cement screed 1:4, 15mm thick applied with cement slurry at the rate of 3 kg / square metre complete all as specified and as directed.
32	M&L for Non-skid ceramic coloured tiles (matt finish), coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar 1:6 (01 cement : 6 coarse sand) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed.
33	All as per item No. 32 above but as in skirting dado etc.., over & including screed bed of cement mortar 1:4 10mm thick.
34	M&L for Vitrified ceramic coloured tiles, light shade, 10mm thick (square / rectangular) polished, area of each tile exceeding 0.36 square metre but not exceeding 0.42 square metre in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed 1:4, 15mm thick applied with cement slurry at the rate of 3 kg / square metre complete all as specified and as directed.
35	All as per item No. 34 above nut in vertical surfaces such as skirting dado, risers ect.., over and including backing coat of cement mortar 1:4 10mm thick.
36	M &L for 25mm thick PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in levelling course all as specified and directed.
37	M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base or foundation ,mass concrete etc.complete all as specified & directed by Engineer- in-charge.
38	Providing PCC 1:2:4, type B0 (using 12.50mm graded stone aggregate) as in seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed platescoping including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.
39	M&L for outdoor coloured vitrified paving tiles, joint free (edge cut) of size 300 mm x 300 mm x 8 to 10 mm thick as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.
40	M&L for 60 mm thick machine pressed precast concrete interlocking paver block factory manufactured (ISI Marked) any shape and size conforming to IS 15658-2006 of M-35 Grade,casted with grey cement and top layer with grey cement & without pigment floor,pavement,etc all as specified and directed.
41	M&L for M Sand filling under floor sand cushioning including watering and consolidation all as specified and directed.
42	M & L for Glazed ceramic tiles coloured of size 350mm x 250mm / 450mm x 350mm / 300 x 450mm minimum 7mm thick in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a backing coat of cement mortar 1:4. 10mm thick complete all as specified and as directed.
43	S&F Coloured Glazed tiles 300x200x7mm thick, on walls/vertical etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface complete all as specified and as directed.
44	M & L 18-20mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement over and including 15mm thick screed mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.
45	M&L for Machine cut kota stone slab flooring 20-25 mm thick of size not less than 550 mm X 550 mm, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 (1 cement : 6 coarse sand), cutting, rubbing, grinding and polishing complete all as specified and as directed.
46	M&L for Machine cut kota stone slab flooring 14-16 mm thick as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as in in skirting, dados, risers to steps etc, laid over and including 10 mm rendering layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing complete, all as specified.
47	Deployment of labour / machine for polishing of existing old kota stone flooring with electric operated floor polishing machine fitted with fine grade Carborundum stone (No. 320) and mirror polish complete all as specified and as directed by the Engineer -in-Charge.
48	M&L for green marble work 18 to 20 mm thick (table rubbed and polished) & circular cutting at one end in steps, jambs,pillars, window, cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
49	M & L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection finishing the exposed surfaces fair and even complete all as specified and as directed.
50	M & L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, at the junction of plinth protection surfaces complete all as specified and as directed..
51	M& L for 15 mm rendering in cm (1:3) with WPC as in sunken floor finished the surfaces even and smooth without using extra cement all as specified and directed. Note : WPC shall be measured and paid separately
52	M&L for applying evenly a coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @0.30 lit/sq.m including cleaning surfaces etc complete all as specified and directed including water tightness testing.
53	M&L plain cement concrete Type E2 1:5:10( 40 mm graded aggregate) as in sunken floor filling etc complete all as specified and directed.
54	M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed.
55	S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. complete all as specified and as directed.
56	S&F Factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed..
57	S&F Factory made 2nd class hard wood 35 mm thick plain, framed,panelled shutters(any number ofpanels), withpanels of timberflat on both sides (feather edged), or of veneered particleboard mediumdensity, woodparticle board withcommercial faceveneers: suppliedand fitted to chowkats complete all as specified and as directed.
58	S&F Factory made 2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted withcut and mitred beadsor securing glass,etc.; sizes of members of shutters asspecified in SSR PartI, Section 8, clause8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.
59	S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed
60	S&F for 18/19 mm thick plywood (12 Nos of ply) (make green or equivalent) grade BWP, type BB fixed width screws to timber frame work or ply wood including 2nd class HW fillets of bullnosed splayed, chamfered or rounded edge ect. exc 3 sqcm and n.exc 6 sqcm complete all as specified and as directed.
61	S&F 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and as directed.
62	S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised Width of flaps (when open) in mm 30mm complete all as specified and as directed.
63	Supply and fix 75mm size stainless steel handle grade 304 chromium finish decorative type fixed to shutter complete all as specified and as directed.
64	S&F 25 mm size magnetic catches with plastic body and striking plate and fixed complete all as specified and as directed.
65	S&F SS Butt hinges, medium weight, cold rolled mild steel, and fixedbright polished and fixed, 100mm size fixed with screws complete all as specified and as directed.
66	S & F Aluminium handles, cast type, anodisedhandle 150 mm cast type anodized complete all as specified and as directed.
67	S & F Aluminium tower bolt 150 mm size complete all as specified and directed.
68	S&F 300mm long Aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed with screws complete all as specified and as directed.
69	S&F for 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
70	S&F Mild steel mortise lock vertical type of 4 levers of size 100 mm complete all as specified and as directed.
71	S&F Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.
72	M&L for prepartion of new surfaces of wood and wooden based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.
73	S&F in repair for 4mm thick Plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured) in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. complete all as specified and as directed
74	S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm thick MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed.
75	Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail & bottom rail Paneling plain colour PVC sheet to be fitted in MS frame welded/sealed to the stile & rails with suitable PVC sheet beading as per specification & shown on drawing in SSR Pt II of 2010 incl pvc hinges 100 mm size – 3 Nos for each shutter complete all as specified.
76	Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, complete all as specified and directed. (a) Frame (top & side) section shall be of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall be of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20738).(d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) Note:-Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx
77	Supply, fabricate and fixing in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.50 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40mm width of aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position all as specified and directed. Note for Serial Item Nos 33 to 35:- (i) Section No given above are of Make-Jindal and are for guide line. (ii) The measurements shall be taken actual at site, any wastage shall be included in the rates quoted.
78	Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).
79	Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) partition wall, partly glazed with 5.50 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminatied including rubber bead joining cleat for fixing in position etc all as specified below complete all as specified and directed. (a) Outer member top & verticle section shall of size 101.60 x 44.45 x 2.5 mm ( Section No 20102) (b) Middle member top & verticle section shall of size 101.60 x 44.45 x 2.5 mm ( Section No 20057) (f) Glazing clip for securing glass / panel shall be be of 0.80 mm thick (Section No 19370).
80	S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe 410-W/ E-250.
81	S&F false ceiling of Non asbestos fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm . The aluminium frame work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge. Make : Everest or equivalent as approved by GE
82	Supplying, fabricating and fixing cladding on RCC Col, steel gate (for all height, outer surface) of aluminium composite panel in metallic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick, mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/ Lumiflon based fluoropolymer resin coating of approved colour and shade on exposed face and polymer (Service) coating on other face, fixed over and including base frame fabricated with aluminium square pipe of size 25 mm x 20 mm with 1 mm wall thickness in 600 mm x 600 mm size grid including stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant for groove filling, backer rods etc. complete all per manufacturer instruction and as directed.
83	Collapsible steel gates, top hung, consisting of channel pickets, pivotedflat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete
84	S&F in repair for Harrison Curtain rails 20mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc.in repair all as specified and as directed.
85	S&F roller blind with aluminium powder coated channel & PVC runners and fabric blinds fixed to window as per manufacture instruction complete all as specified and directed. As per sample kept in GE’s office.
86	Cutting holes in brick walls in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfasts measured from the face of the jamb into the wall exc. half brick but not exc.one brick complete
87	Forming jambs, etc to openings including cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work complete in cement mortar 1:4
88	Making good under cills or over arches lintels and bressummers including all pinning when necessary complete in cement mortar 1:4
89	M&L for Complete Removal of existing water proofing treatment over roof including PCC of any thickness description in any position including cleaning the surfaces with wire brushing, watering and removing debris up to 1500 mtr distance etc complete all as specified and directed.
90	Material and Labour PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course using integral water proofing compound as per manufacturers instructions as in roofs complete all as specified and directed. Note:- WPC shall be measured & paid seperately.
91	M&L for Rendering in cement mortar 10mm thick in of 1:3 ratio on concrete surfaces of roof finished even and smooth without using extra cement to recive water proofing membarane mixed with integral water proofing compound as per manufactures all as specified and directed. Note:- WPC shall be measured & paid seperately
92	Supply only integral water proofing liquid complete all as specified and directed. (@200ml per bag of cement)
93	M&L for preparation of the plastered surfaces by thoroughly removing all loose particles, dirt/ dust particles and applying a uniform coat of hot blown bitumen of grade VG-10 @ 1.20 kg/Sqm confirming to IS 702 over a coat of water based bituminous primer @ 0.40 ltr/ sqm and laying APP based polymeric membrane as per IS 16540-2017/ IS 16532-2017 with overlap of 100mm minimum weighing 3.6 kg/ sqm and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150gms/ sqm) by forced application and finally finsihed the memberane surface by applying a coat of solar reflective aluminium paint @ 0.1 ltr / Sqm complete all as per manufacturer's instructions as specified and as directed.
94	S&F Unplasticised PVC pipes and fittings of 15mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed
95	S&F Unplasticised PVC pipes and fittings of 20mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed
96	S&F Unplasticised PVC pipes and fittings of 25mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed
97	M&L for Cutting chases or making holes in brick walls for concealed water tubing, making good to facings where required, cutting not exc 10 cm girth all as directed
98	S & F in repairs Vitreous china, semi-pedestal pattern (Anglo-Indian Type) , white including fixing bolts, plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as directed.
99	S&F for Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, snow white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repairs, all as specified.
100	S & F in repairs PVC valve less flushing cistern syphonic action type, low level, inlet, ball valve, float & handle 10 litre capacity including brackets, flush pipe and all accessories all as directed.
101	S & F in repairs of 2-in-1 faucet with 1.5m tube and hook all as directed.
102	S&F in repairs Vitreous China wash Basin (countertype type) , including brackets, CP waste coupling 32mm and waste pipe, including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed
103	S & F in repair vitreous china urinal half stall urinal type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement complete all as directed.
104	S&F in repairs 15 mm dia Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for PVC/ iron pipe or for brass ferrule and fixed complete all as specified amd directed
105	S&F in repairs 15mm dia stop valve/Angle valve, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for PVC/iron pipes or for unions and fixed of,complete all as specified and directed.
106	S&F in repair 15mm dia Swan neck type chromium plated pillar taps, cast copper alloy with capstan heads screwed down high pressure, with or without lettered 'Hot' of cold with long screed shanks and fly nuts screwed for iron pipe and fixed with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule and fixed complete all as specified and directed. (Prayag CAT No : 9914)
107	S&F brass CP two way bib tap of 15mm dia chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for PVC/ iron pipe or for brass ferrule and fixed complete all as specified amd directed .
108	S&F in repairs chromium plated shower roses 125mm dia with or without swivel joints any size, including fixing to steel pipe or union complete all as specified and directed
109	S&F in repairs tubular towel rail brass chromium plated, 20mm dia, complete all as specified & directed.
110	S&F in repairs Stainless steel Soap dish fixed to wall all as specified and directed
111	S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.
112	S&F PVC (SWR) Gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed
113	S & F PVC connections 15mm size with PTMT nuts of length 600 mm,complete all as specified and directed.
114	S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or floor, of 110 mm dia complete all as specified and directed.
115	S&F PVC (SWR) bends 110mm dia of any radius with access door with rubber ring joints fixed to wall or floor all as specified
116	S&F for 110mm dia PVC (SWR) branch piece, double (double Y) equal or unequal with rubber ring joints fixed to wall or floor all as specified
117	S&F for 110mm dia PVC (SWR) vent cowl with rubber ring joints fixed to wall or floor all as specified
118	S&F 75 mm bore PVC ( SWR) pipes of single socketed in any length with rubber ring joints fixed to wall or floor all as specified
119	S&F 75 mm bore. PVC (SWR) bends with rubber ring joints fixed to wall or floor all as specified
120	S&F for 75mm dia PVC (SWR) junction double, (double T), equal or unequal with rubber ring joints fixed to wall or floor all as specified
121	S&F in repair 500 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl taking down old all as specified and directed
122	S&F in repair 1000 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl taking down old all as specified and directed
123	S&F Ball valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball screwed for iron pipe of 25 mm bore (Minimum weight 455 gms )and fixed complete all as specified and directed.
124	S & F in repairs 1500mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed.
125	S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
126	S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.
127	M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated Fe 410 -W (Gde- E- 250) quality A
128	M&L for two coat of synthetic enamel paint over a coat of red oxide primer on newly prepared steel surfaces over 10cm in width or girth not otherwise described.
129	S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
130	Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed.
131	Supply & Fix 06 mm thick plain, multicavity poly carbonate sheet (coloured) in roof covering, fixed with and including aluminium fillets at joints and aluminium angles at the end, fixed with self drilled screws and standard fittings, fixtures and accessories complete all as specified and as per manufacturer's instructions all as specified and directed.
132	S&F for 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall
133	Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.
134	Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly,including Modular boxes, frames and cover plates all as specified complete for (a) one light point controlled by one switch.Note : Cost of Modular box, frame, cover plates and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.
135	One Exhaust fan point controlled by one switch.
136	One Air circulator fan point controlled by one switch.
137	One ceiling fan point controlled by one switch and regulator
138	One switch socket outlet 3 pin 5 Amps on same board along with other switches
139	One switch socket outlet 3 pin 5 Amps on independent board.
140	One light point controlled by 2-way switch.
141	All as per item No 134.00 here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded FRLSH cable and one 4.0 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour including steel box of required module for modular switches/sockets all as specified for one 3 pin switch socket outlet, 15 Amps, complete all as specified and as directed.
142	Supply and Fixing Modular switch 1 way 6A, 1 module complete all as specified.
143	Supply and Fixing Modular switch 2 way 6A, 1 module complete all as specified.
144	Supply and Fixing Modular switch 1 way16A, 1 module complete all as specified.
145	Supply and Fixing Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified.
146	Supply and Fixing Modular Socket, 6A/16A - 2/3 pin combined 2 module complete all as specified.
147	S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all specified.
148	Supply and Fixing Modular fan step regulator , 120w, 2 module complete all as specified.
149	Supply and Fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified.
150	S&F Surface and wall mounted LED tube light fitting, 20 W, batten type, PC housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed suitable copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed.
151	Fixing only serviceable light fittings obtained from taking down in new or old location including connecting up with new three core flexible copper conductor cable of suitable size from ceiling rost to connector of light fitting complete all as specified and as directed.
152	Supply and fix Suspended/pendant type LED tube light fitting 40 Watt for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories,suitable for operation on AC, single phase 220 / 230 Volts, 50 Hz supply with suspension arrangement of 1.5 mtr (02 Nos) parallel for fixing of ftg, including taking down old fittings complete all as specified.
153	S&F LED building security light fitting 45W made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexble copper wire including provision of necessary GI tubing medium grade 25mm bore of pipe 1.5 bent to shape with necessary clamps made out of mild steel, nuts and bolts etc., including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface for fixing the fitting to Bldg etc complete all as specified and as directed.
154	Supply and fix surface mounting 36 Watt LED ceiling light 2x2 environmental friently new generation aesthetically designed ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, LED luminaire suitable for surface mounting complete application 36W LED (2'x2') complete with electronic driver, suitable for operation on AC, single phase, 220V/230V,50Hz, including provision of three core flexible copper conductor PVC insulated 1100V grade cable connecting up ceiling rose to fitting terminal end and testing complete all as specifed and as directed.
155	Supply and fixing in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. (Note:- Out going MCB shall be measured and paid for separately)
156	Supply and fix angular lamp holder insulated body with back plate suitable for fixing of LED buld complete all as specifed and as directed.
157	Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface complete all as specified.
158	M&L for replacement of Power / Sub-main wiring with PVC insulated unsheathed, FRLSH ,1100 volts, grade multistranded copper conductor, two runs of single core 6 sqmm conforming to IS-694, drawn through and including suitable dia rigid PVC conduit, conduit fittings and conduit accessories alongwith one run 6 sqmm PVC insulated single core multistranded copper conductor cable (green) as earth continuity conductor concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc. and connecting to common earth dolly complete all as specified and as directed.
159	M&L for replacement of Power / Sub-main wiring with PVC insulated unsheathed, FRLSH ,1100 volts, grade multistranded copper conductor, two runs of single core 4 sqmm conforming to IS-694, drawn through and including suitable dia rigid PVC conduit, conduit fittings and conduit accessories alongwith one run 4 sqmm PVC insulated single core multistranded copper conductor cable (green) as earth continuity conductor concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc. and connecting to common earth dolly complete all as specified and as directed.
160	Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.(MCB for 12 way SPN DB)
161	Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.(MCB for VTPN 4 DB)
162	Supply and fixing 240V, 30 mA double pole RCBO, cap 63 Amp, in the MCB DB Complete with connection testing and commissioning complete all as specified.
163	Supply and fix ceiling fan complete with blades, down rods, and accessories, 230V , 1200 mm sweep min air delievry 210 CFM with service value 6.0 BEE five star rated with brushless direct current motor (BLDC ) complete all as specified and as directed.
164	Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with louvrers and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.
165	Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 450 mm sweep, metallic body complete with louvrers and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.
166	Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 600 mm sweep, metallic body complete with louvrers and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.
167	Supply and fix 50 ltr cap electric water heater 5 star rated, vertical type, stainless steel inner tank and PVC outer tank including necessary water and electric connection complete all as specified and as directed.
168	Supply and fix air circulator fan AC single pahse 230/240V of size 600 mm sweep with fixing arrangement complete all as specified and as directed.
169	Taking down the ceiling fan/ Exhaust Fan/ Wall mounted fan in situ and kept in safe custody/ deposit in MES store yard complete all as specified and as directed.
170	Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.
171	Fixing only serviceable exhaust fan/ wall mounted fan and connecting up including provision of cable from ceiling rose / connector to fan complete all as specified and as directed.
172	Material and labour for earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd 4 mm dia galvanized steel wire all as specified and directed by Engr-in-Charge
173	Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed.
174	Excavation in trenches in soft/ loose soil not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundation of poles, stay, cable, pipes etc and getting out complete all as specified.
175	Returning, filling, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each complete all as specified.
176	Removal of surplus soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified.
177	Supply, laying and testing cable in replacement of XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core. Note on wall DWC pipe will be clampled at every 1 mtr length complete all as specified and as directed.
178	M&L for Sand cushioning to underground cable 8cm before laying the cable and 15cm (punned down to 18 cm) after laying and stretching the cable complete all as specified.
179	M/L Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified
180	S&F Galvanised pipe 50 mm light grade for mechanical protection for cable/ earthing strip complete all as specified and directed.
181	Supply & fixing in replacement of MCCB in existing Outdoor / Indoor Type LT Panel ,Capacity 36 KA 4 pole 250 Amps adjustable thermal and fixed magnetic type with preader and aluminium lugs all as required at site.
182	Supply & fixing in replacement of MCCB in existing Indoor type LT Panel, Capacity 36 KA 3 pole 160 Amps adjustable thermal and fixed magnetic type with preader and aluminium lugs all asspecified and directed.
183	M&L for replacement of earthing of existing Indoor type LT Panel complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI strip of size 32 X 6 mm and 40 mm dia bore 7.5 mtr long light grade GI protection pipe for earth strip and GI watering pipe 40 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009. Note :- All joints either strip to strip of strip to earth plate are fixed with welded joints. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Tamil Nadu Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repair To Bldg No P-88 Of Mtti Af Stn Avadi, Avadi-Tamil Nadu

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repair To Bldg No P-88 Of Mtti Af Stn Avadi, Avadi-Tamil Nadu

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us