Name of Work:- SPL REPAIR OF BLDG NO P-145 (OTM) AT CMVL UNDER GE (UTILITY) MEERUT CANTT.
Sl. No.
Item Description
1
Dismantling wall and ceiling boards ( fibre pulp insullation Etc) or insullation boards/ slabs blankets any thickness including cover fillets complete all as specified and directed.
2
M&L for taking of old water proofing membrane and cleaning the existing surfaces and removal of debris , loose particles , grass etc and existing water proofing roof treatment completely , existing plaster and repairing the cleaned surfaces through repair mortar and providing chemical injection grouting and angle filets ( if required ) and treatment of pipe entry with hybird PU sealant dual shrinkage compensated micro conrete. Applying priming coat of epoxy primer with resin hardner in 1:1 ratio with water dilution as per manufacturer instructions applying 2 coats of solvent based polyrethane liquid membrane not less than 500 micron thick UV having SRI value greater than eual to 105 with consumption of 0.61 kg/sm ( each coat), 2nd coat shuld be applied once 1st coat becomes dry completely including 10 mm thick cement plaster in cm 1:4 with and including liquid water proofing compound @ 200 ml per bag of cement complete all as specified and directed Make : Asian Paints /Thermax/Berger
3
Demolition brickwork or stone work built in cement mortar including all quoins arches , pillers etc complete all as specified and directed.
4
M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 complete all as specified and directed.
5
Taking down cement plaster including raking out joint hacking for key scrubbing down with water complete all as specified and directed.
6
M&L for 15 mm thick rendering in cm 1:4 on brick/ concrete surfaces of external walls finshed even and fair complete all as specified and directed.
7
M&L for 10 mm thick rendring in cm (1:6) on brick/ concrete surfaces of internal walls finshed even and fair complete all as specified and directed.
8
M&L for 5 mm thick rendring in cm (1:3) on brick/ concrete surfaces of ceiling finshed even and fair complete all as specified and directed.
9
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.
10
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing rubbish off the MD land complete all as specified and directed.
11
M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc complete all as specified and directed.
12
M&L for colored Vitrified Ceramic tiles high glossy finished 8 mm thick (square/ rectangular) polished, size of each tiles 600mmX1200mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.
13
Ditto as per above item No 12 but in skirting over and including 10 mm thick backing coat in cm 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information
14
Ditto as per above item No 12 but in skirting over and including 10 mm thick backing coat in cm 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
