|
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8118/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: Comprehensive maintenance works of officer Md Accn Bldgs at AGE B/R-II AOR under GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | M & L for preparation of old surfaces of walls by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of plastic / acrylic emulsion on wall surfaces . The make shall be one of the following brands : (i) Asian Paints - Apcolite Premium Emulsion (ii) Berger Paints - Easy Clean Emulsion (iii) Nerolac Paints - Beauty Gold/Beauty Smooth Emulsion or techno commercially equivalent make as approved by GE. The surface will be finished by use of a roller complete all as specified and directed. |
| 3 | M & L for complete removal of existing treatment and applying 1.5mm thick white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of plastic/acrylic emulsion on wall surfaces over a coat of wall primer prepared surfaces of internal walls . The make shall be one of the following brands : (i) Asian Paints - Apcolite Premium Emulsion (ii) Berger Paints - Easy Clean Emulsion (iii) Nerolac Paints - Beauty Gold/Beauty Smooth Emulsion or techno commercially equivalent make as approved by GE, complete all as specified and directed. |
| 4 | M & L for preparation of old decorated surfaces of walls plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of Oil bound distemper to walls, white or tinted complete all as specified and directed. |
| 5 | M & L for preparation of old decorated surfaces of ceiling plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of Oil bound distemper on ceilings, white or tinted complete all as specified and directed. |
| 6 | Taking down cement or cement lime plaster on brick wall / stone walls/concrete surfaces, ceilings etc. including ranking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 7 | M&L for 15mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for 5 mm thick plastering in CM 1:3 finished even and smooth w/o using extra cement on brick or concrete surface of ceilings complete all as specified and directed. |
| 9 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resistant primer and 1.5 mm thick Birla wall care putty on plastered surfaces complete all as specified and directed. |
| 10 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali-resistant primer and 1.5 mm thick Birla wall care putty on plastered surfaces complete all as specified and directed. |
| 11 | M&L for preparation of old painted surface of wood and wood based materials of any description not otherwise described over 10 cm. width or girth shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel painting complete all as specified and directed. |
| 12 | M&L for preparation of old painted surface of Steel and iron work of any description not otherwise described over 10 cm. width or girth shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 13 | S & F in repairs Vitreous China wash basin, white, flat back, size 630x450mm including cutting for & pinning in ends of brackets or erecting stand but exclusive of fixing of supply of waste pipe complete all as specified and directed. |
| 14 | S & F in repairs Vitreous table top wash basin, white, rectangular with curved corners of size 400x500mm including cutting and setting on granite including waste fitting but excluding the waste pipe etc complete all as specified and directed. |
| 15 | S & F 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 16 | Supply & Fix in repair stainless steel kitchen plate rack ( non magnetic type ) made of 0.85 mm thickness sheet of size 31'' x 36'' x 10'' complete all as specified and directed. |
| 17 | Careful dismantling and Re-fixing the EWC using high-grade white cement mixed with waterproofing compound or anti-fungal silicone sealant at the base to ensure a water-tight joint after removing the old sealant/white cement at the base and replacement of the rubber gasket/wax ring/seal between the WC outlet and the soil pipe etc complete all as specified and directed |
| 18 | S & F in repairs Vitreous china premium/ 1st quality wash down water closet EWC closed pattern including all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect complete all as specified and directed. |
| 19 | S & F in repair plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 20 | Supply and fix in repairs PVC valve less symphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed. |
| 21 | S & F in repair Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white with cascade flush tank (closed pattern including all necessary accessories) complete all as specified and directed. |
| 22 | S&F in repair PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends complete all as specified and directed. |
| 23 | S&F in repair 15 mm bore Bib taps CP brass fancy type single lever, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 24 | S&F in repair 15 mm dia Pillar taps CP brass fancy type single lever, screwed down high pressure, with lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 25 | S&F in repair 15 mm dia Pillar taps CP brass swan neck fancy type single lever, screwed down high pressure, with lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 26 | S&F in repair 15 mm dia Pillar taps CP brass fancy type single lever with 150mm extension body, chromium plated, screwed down high pressure, with lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 27 | S&F in repair 15 mm Brass CP mixer for mixing hot & cold water and over head shower screwed down, wall mounted with bend complete all as specified and directed. |
| 28 | S&F in repair 15 mm dia Stop valves, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union with long shank and complete all as specified and directed. |
| 29 | S&F in repair 15 mm dia Stop valves, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union with long shank complete all as specified and directed. |
| 30 | S&F in repairs 15 mm bore two way Bib taps fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule Branded Make complete all as specified and directed. |
| 31 | S&F in repairs 15 mm dia Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 32 | S&F in repair plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 33 | S&F in repairs 15 mm dia Brass CP shower rose 125 mm size fixed complete all as specified and directed. |
| 34 | S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges with brackets complete all as specified and directed |
| 35 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 36 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 37 | S&F in repairs bath room cabinet with mirror PVC size 450x350mm complete all as specified and directed. |
| 38 | S & F in repair 600x450mm bevelled edge mirror of selected quality glass mounted 6mm thick AC/ply board fixed to wooden plugs with CP screw and cup of washer complete all as specified and directed. |
| 39 | S&F in repair Vitreous China soap dish approximate size 160x 160x90mm embedded in the wall complete all as specified and directed. |
| 40 | S & F in repair PVC waste pipe 900 mm long with complete fitting etc 32 mm dia complete all as specified and directed. |
| 41 | M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete all as specified and directed. |
| 42 | S&F in repair for 15mm bore of length exe 1m, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor. complete all as specified and directed |
| 43 | S&F in repair for 15mm bore fitting for medium grade, galvanised iron pipe (with or without replacing of pipe in short lengths upto 1m length), medium grade, galvanised iron pipe, complete all as specified and directed |
| 44 | S&F in repair of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 45 | S&F in repair of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 46 | S & F in repair Brass Elbow for CPVC pipe of outer 20mm, complete all as specified and directed. |
| 47 | S & F in repair Brass Elbow (3/4 X ½) for CPVC pipe of outer 20mm, complete all as specified and directed. |
| 48 | S & F in repair Brass Tee for CPVC pipe of outer 20mm, complete all as specified and directed. |
| 49 | S & F in repair Male Brass Threaded Adaptor (MTA/ MBTA) for CPVC pipe of outer 20mm, complete all as specified and directed. |
| 50 | S & F in repair Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC pipe of outer 20mm, complete all as specified and directed. |
| 51 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed. |
| 52 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each complete all as specified and directed. |
| 53 | Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed. |
| 54 | Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed. |
| 55 | M&L for 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified and directed. |
| 56 | S & F mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 57 | M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping including necessary form work weathering slightly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and directed. |
| 58 | S & F for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, with both faces is covered with decorative face veneer with lipping / frame to match complete all as specified and directed. |
| 59 | M&L for 2nd class hard wood plain framed panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 60 | S & F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and mitred beads or rebated sash bars for securing glass or gauge etc. complete all as specified and directed. |
| 61 | S & F 30 mm thick 2nd class hard wood glazed and skeleton shutter of divided into square, with plain chamfered or rounded metred and rebital sash bar any number and framing moulded windows, ventila-tors, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) fitted to chowkats complete all as specified and directed. |
| 62 | M & L for preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 63 | S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying fixing in opening etc complete all as specified and directed. |
| 64 | M & L for factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing at site as per specification and drawing complete all as specified and directed. |
| 65 | S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and directed. |
| 66 | S&F 75 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, typeC-22 complete all as specified and directed. |
| 67 | S&F 150 mm length of SS tower bolts of extruded section and fixed complete all as specified and directed. |
| 68 | S&F 150 mm length of stainless steel handles complete all as specified and directed. |
| 69 | S&F for stainless steel sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and directed. |
| 70 | S & F in repairs 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 71 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm & fixed with stainless steel wire staples fixed complete all as specified and directed. |
| 72 | S&F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed. |
| 73 | S&F 3mm thick figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed. |
| 74 | S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed complete all as specified and directed. |
| 75 | S&F in repair of 25 mm dia Drapery curtain rods powder coated decorative type complete all as specified and directed. |
| 76 | S&F in repair fancy powder coated brackets for 25 mm dia drapery curtain rods complete all as specified and directed. |
| 77 | Resecuring or easing & adjusting without taking down wooden shutters of any description n exc 1 sqm each complete all as specified and directed. |
| 78 | Taking down old woode glazed shutter n exc 1 sqm each complete from frame and refixed the same after necessary repair/rebeting/ fixing wire mesh/glass(wire mesh / glass measured separately) complete all as specified and directed. |
| 79 | Taking down old iron glazed shutter complete from frame and refixed the same after necessary repair/welding/rebeting/ fixing wire mesh/glass(wire mesh/glass measured separately), area of shutter n exc 1 sqm each complete all as specified and directed. |
| 80 | M&L for welding in repairs hinges , handle , lock , tower bolt , sliding bolt ,rat rail , peg stay ,peg set , exc 6mm and not exc 9 mm in thickness. by welding etc complete all as specified and directed. |
| 81 | M & L in repair 18mm thick plywood, grade 1 (with BWR resin) with one face veneered decorative fixed with brass screws and cups to timber frame work complete all as specified and directed. |
| 82 | S & F in repair Continuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as specified and directed. |
| 83 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed. |
| 84 | M&L for Vitrified light shade ceramic tiles 10 mm thick (square/ rectangular ) polished, area of each tile not exceeding 0.36 sqm , in floor/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface, laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and directed. |
| 85 | M&L for non skid coloured ceramic floor tiles 7-8 mm thick (square/ rectangular ) area of each tile exc 0.11 sqm but nexc 0.18 sqm, set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface, laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and directed. . |
| 86 | M&L for non skid coloured ceramic tiles 7-8 mm thick (square/ rectangular ) area of each tile exc 0.06 sqm but nexc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface, laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and directed. |
| 87 | M&L for glazed ceramic coloured tiles 450 x 300 x 7 mm / 350 x 250 x 7mm in vertical surface fixed over and including 10mm thick back coat in CM 1:4, set and jointed in cement slurry and pointed with white or coloured cement to match complete all as specified and directed. |
| 88 | Demolition of stone slab and tiles of any description or thickness in floors, aprons laid , bedded and pointed any mortar complete all as specified and directed. |
| 89 | M & L for Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms, over 20 mm thick screed bed in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all specified and directed. |
| 90 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick, kitchen sink with plugs, washers and wastes; including bedding in cement mortar on dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 91 | S & F in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls, bore of pipe in 110 mm, etc complete all as specified and directed. |
| 92 | S & F in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls, bore of pipe in 75 mm, etc complete all as specified and directed. |
| 93 | S & F in repair PVC (SWR) bends any radius 110 mm dia, complete all as specified and directed. |
| 94 | S & F in repair PVC (SWR) bends any radius 75 mm dia, complete all as specified and directed. |
| 95 | S & F in repair PVC (SWR) branch piece, single (single Y) equal or unequal any radius, 110 mm dia, complete all as specified and directed. |
| 96 | S & F in repair PVC (SWR) junction single, (Single T) equal or unequal any radius, 110 mm dia, complete all as specified and directed. |
| 97 | S & F in repair PVC (SWR) vent cowl 110 mm dia, complete all as specified and directed. |
| 98 | M&L in repair 75 mm PVC Nahani/ floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 99 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 100 | Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified. |
| 101 | M&L for cement concrete 1:2:4 type B0 (using 12.50mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges mixed with water proofing compound at 200ml per bag of cement and self curing admixtures to prevent leakages and seepages, finishing the surface even and smooth without using extra cement complete all as specified and directed |
| 102 | Demolition of brick work or stone masonry, built in cement mortar complete all as specified and directed. |
| 103 | M & L for brick work with fly ash bricks built in CM 1:6 with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius all as specified. |
| 104 | M & L for half Brick wall with old size fly ash bricks straight or curved on plan to any radius built in cement mortar 1:6 complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
