|
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8101/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: REPAIRS TO SUNKEN FLOOR, VERTICAL STACKS, PLASTERING AND TILING OF OTM/MD ACCN AND OTHER MISC WORKS IN IB LINES, I/S MKD AND O/S MKD OF AGE B/R-I UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Demolition of cement concrete (unreinforced) of any description of any position not otherwise specifically provided for as in sunken floors & floor etc and remove all the debris from site and rubbish off the premises complete all as specified and as directed. |
| 3 | M&L for PCC type E2 1:5:10 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 4 | M&L for providing cement concrete type B0 1:2:4 (12.5mm graded stone aggregate and 2 river sand) as in padding and benching & filleting with IWPC (IWPC measured and paid separately) complete all as specified and as directed. |
| 5 | M&L for screed bed or bedding layer 10 mm thick CM 1:4 for laying floor finishes finished even and smooth without using extra cement with IWPC (IWPC measured separately) as in roof slabs complete fine aggregate used natural river sand complete all as specified and as directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding including mosaic backing and remove all the debris from site and rubbish off the premises complete all as specified and as directed. |
| 7 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc., laid over and including 15mm thick cement screed bed or bedding layer in CM 1:6 (1 cement 6 river sand)), tiles jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, complete all as specified and as directed. |
| 8 | M & L for glazed coloured ceramic tiles in vertical surfaces of size 450mmx300mmx7mm thick laid over 10mm thick backing coat in CM 1:4 (1 cement 4 river sand)), set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, complete all as specified and as directed. |
| 9 | Taking down 15mm bore steel tubing and connections in any position, complete all as specified and as directed. |
| 10 | Taking down 20mm bore steel tubing and connections in any position, complete all as specified and as directed. |
| 11 | M& L for cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 (1 cement 3 river sand) for concealed water tubing, etc.& making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 12 | Supplying and fixing of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified and as directed. |
| 13 | M&L for 20 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete all as specified and as directed. |
| 14 | S&F rotational moulded polyethylene water storage tanks triple layer white (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and directed. |
| 15 | S&F rotational moulded polyethylene water storage tank triple layer white colour (cylindrical vertical with closed top) of 1000 litres capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and directed. |
| 16 | S&F 20 mm dia brass ball valve, high pressure with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule fixed in repair complete all as specified and directed. |
| 17 | S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 18 | S&F for wash down water closet (pedestal pattern) complete white with plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polyethylene of low or density or PVC 32mm dia for low level flushing cistern including pedestal pan and trap, and connection to drain (or outgoing pipe) complete all as specified and as directed. |
| 19 | Supply and fix PVC valve less symphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed. |
| 20 | S&F for vitreous china wash basin pedestal type white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP fancy type pillar tap, 01 Nos 32mm waste coupling, one pair of MS bracket, cutting for and pinning in ends of brackets complete all as specified and directed. |
| 21 | S & F in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but excluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed. |
| 22 | S&F in repairs Vitreous China squatting pan , \\"Orissa\\" pattern size 580 X 440 mm white with integral footrest (excluding flushing cistern & flush pipe) with 110mm dia PVC SWR 'P' or 'S' trap, fixing of cistern, complete including provision of cement concrete complete all as specified and as directed. |
| 23 | S&F 600mmx450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with PVC / aluminium frame and fixed to wooden plugs with chromium plated brass screws, cup washers, complete all as specified and as directed. |
| 24 | S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed. |
| 25 | S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 26 | S&F in repairs 15 mm dia fancy type concealed stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 27 | S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 28 | S&F in repair two way bib tap / cock 15mm bore, chromium plated, fancy type complete all as specified and directed. |
| 29 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and directed. |
| 30 | S&F in repairs PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed complete all as specified and directed. |
| 31 | S & F brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated complete all as specified and directed. |
| 32 | S&F stainless steel Kitchen sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary PVC outlet pipe and coupling complete all as specified and directed. |
| 33 | S & F in repair stainless steel plate rack 31\\" X 36\\" X 10\\" made up of 1mm thick sheet (Non magnetic) complete all as specified and directed. |
| 34 | S&F in repair 550mmx350mm PVC Cabinet Mirror with shelves of selected quality glass and fixed on walls to wooden plugs with chromium plated brass screws, cup washers complete all specified and directed. |
| 35 | S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe of 15mm dia and fixed complete all as specified and directed. |
| 36 | Supply and Fix PTMT Shelf of weight not less than 300 gms with soap dish (tray) fixed with and including Chromium plated brass screws and wooden / plastic cleats etc., complete all as specified and as directed. |
| 37 | S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall/ floors including taking down existing pipe complete all as specified and directed. |
| 38 | S & F PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to walls/ floors including taking down complete all as specified and directed. |
| 39 | S&F in repair PVC (SWR) bends any radius 110mm bore complete all specified and directed. |
| 40 | S&F in repair PVC (SWR) bends with access door any radius 110mm bore complete all specified and directed. |
| 41 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all specified and directed. |
| 42 | S&F PVC(SWR) vent cowl 110mm bore complete all specified and directed. |
| 43 | S&F PVC (SWR) bends any radius 75 mm dia complete all specified and directed. |
| 44 | S&F PVC (SWR) bends with access door any radius 75 mm dia complete all specified and directed. |
| 45 | S&F PVC (SWR) junction single (single T) equal or unequal of bore 75mm complete all specified and directed. |
| 46 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm complete all specified and directed. |
| 47 | S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed. |
| 48 | S&F in repairs for PVC waste pipe for Sink/WHB with fitting etc 38 mm dia. 60mm long complete all specified and directed. |
| 49 | Supplying and applying single component AP Smart care PU Magnum or techno commercially equivalent make as approved by GE, Zero VOC, elastomeric pure polyurethane membrane free from bitumen and tar, APL Smart Care PU Magnum or techno commercially equivalent make as approved by GE with minimum elongation of 350%, solid content of 85%, Tensile strength of >2.5Mpa, crack bridging capacity of 3mm and Shore hardness of > 60. The system consists of applying the PU Magnum US waterproofing treatment @ 2 kg/sq.m. in two coats. over a one coat of primer with Solvent Based HFP 130/120/Equivalent @ 200 Gms/Sqm including surface preparation Complete removing of existing roof treatment/ tar felt and cleaning the entire surface with grinding and removing the loose mortar, dust particles & making the surface sound enough, addressing the cracks by making v groove & if any surface imperfections are treated with APL SC Repair Polymer or techno commercially equivalent make as approved by GE mixed with neat cement in 1:1 proposition. Treating all construction joints, coving/angle fillet: The coving shall be done on all sharp edges and on the terrace surface to avoid water stagnation. The coving of size (50mm X 50mm) should be done by Smart care Repair polymer mixed @5% of weight of cement, in 1:4 ratio of cement and sand across the joints area of slab and parapet wall, bore packing all the pipes are made rough by apply a bond coat with APL Smart Care Multi-Purpose Polymer or techno commercially equivalent make as approved by GE along the periphery of the pipe and sand sprinkling over, pipes to be placed inside the core cut areas appropriately. Grouting the gaps between the pipes and core cut by Smart Care General Purpose Grout or techno commercially equivalent make as approved by GE after fixing an effective leak free shuttering complete all as specified and directed.Note : 1) Contractor shall give guarantee for 10 years for the treatment and a sum equal to 2.5% of the quoted rate will be retained in Final Bill towards security deposit for period of 10 years.2) Alternatively, Contractor may submit FDR in favour of GE Golconda for a period of 10 year towards security deposit. |
| 50 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc and remove all the debris from site and rubbish off the premises complete all as specified and as directed. |
| 51 | M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 (1 cement 6 river sand) complete all as specified and directed. |
| 52 | Taking down cement plaster on wall of any description including racking out joints for key, scrubbing with water etc. complete all as specified and directed. |
| 53 | M & L for rendering 15mm thick in two layers (10mm+5mm) cement mortar 1:4 (1 cement 4 river sand) on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ at 3% by weight of cement (IWPC measured and paid separately) complete all as specified and directed. |
| 54 | M & L for rendering 10mm thick in cement mortar 1:6 (1 cement 6 river sand) on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 55 | M&L for two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of walls including 1mm thick (in two layers 0.5mm each coat) wall care putty on wall and preparation of surface complete all as specified and directed. |
| 56 | M&L for preparing new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 57 | M&L for Rendering 5mm thick in CM 1:3 (1 cement 3 river sand)) as in ceilings, concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 58 | M&L for preparation of new ceiling surfaces and applying three coats of white wash, complete all as specified and directed. |
| 59 | Supply only integral water proofing compound. |
| 60 | Taking down chowkats with shutters (without taking off shutters from the frame exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit complete all as specified and as directed. |
| 61 | All as per item No 59 above here in before but n exc 1.5 Sqm complete all as specified and as directed. |
| 62 | S&F Pressed steel frames 105x60 mm, 1.25mm thick for doors with one or more rebates including necessary PCC filling inside frames fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 63 | Material and labour IInd Class hard wood 35mm Double/Single Flush door shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 64 | Material and labour Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed within wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all as specified and as directed. |
| 65 | Supply and fix Extruded aluminium alloy handles,150mm fabricated type anodized complete all as specified and as directed. |
| 66 | Supply and fix Aluminium, 200mm anodized, barrel tower bolts extruded section & fixed complete all as specified and as directed. |
| 67 | Supply and fixing 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolts plate & two on staple plate & fixed complete all as specified and as directed. |
| 68 | M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed. |
| 69 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed. |
| 70 | S&F 150mm Floor door stopper of aluminium alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 71 | Material and labour Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification complete all as specified and as directed. |
| 72 | Material and labour Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplied and fixed in the frame at site as per specification and drawings complete all as specified and as directed. |
| 73 | Supply and Fix 100mm Butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-22 complete all as specified and as directed. |
| 74 | Supply and fix Aluminium, 150mm anodized, barrel tower bolts extruded section & fixed complete all as specified and as directed. |
| 75 | S&F in repair 304 grade stainless steel curtain rod 20 mm dia including mild steel chromium plated brackets suitable for curtain rods of 20mm dia, including taking off the old articles (Pelmets/wooden/arrangement of curtain), plugging up new key holes, making good the disturbed surface and painting one coat on disturbed surface as required complete fixed in repairs all as specified and as directed. |
| 76 | Supply and fix Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors frames, shutters windows frames sliding shutters, ventilators, grills and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.complete all as specified and as directed. |
| 77 | Supply and fix sheet glass 4mm thick and glazing with oil putty/ alu beads n.exc. 0.50sq.m. each pane complete all as specified and as directed. |
| 78 | Material and labour Preparation of old painted wooden/ steel surfaces of any description over 10 cms width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 79 | S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.00 mm & fixed to iron doors, windows with bolts and nuts or wooden doors, windows suitable wooden beading etc complete all as specified and as directed. . |
| 80 | S & F in repairs 4mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
