|
| 1 | Taking down Cement plaster or cement lime plaster on brick or stone walls including raking out joints, hacking for key & scrubbing down with water etc complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. |
| 2 | Taking down steel window/ventilator with shutters n.exc 1.5 sqm each (without taking off shutter from the frame) with iron mongry including cutting holes through brick wall and making good the dismantled portion in CM 1:4 or PCC (1:2:4) type B-1 and removing from the site,dismantling brick work of hold fasts complete all as specified and directed by Engineer-in-Charge. |
| 3 | Taking down rolling shutters of any description exc 2 sqm but not exc 15 sqm each and complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. |
| 4 | Dismantlling plain or corrugated steel sheeting in roof coverings in any position complete including disposal of unserviceable fillets outside cantt area all as specified and directed by Engineer in Charge. |
| 5 | Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) as in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. |
| 6 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc, removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. |
| 8 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets from any position complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer in Charge. |
| 9 | Demolition of brick work or stone/boulder masonary built in cement mortar incl all quions arches, pillar or any other descrption etc complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. |
| 10 | Dismantling boarding, any description, fixed in any position with nails including complete all as specified and directed by Engineer-in-Charge. |
| 11 | Dismantling existing tanks of capacity exc 500 ltr but not exc 1000 ltr and removing to store complete all as specified and directed by Engineer-in-Charge. |
| 12 | Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site to store complete all as specified and directed by Engineer-in-Charge. |
| 13 | Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site to store complete all as specified and directed by Engineer-in-Charge. |
| 14 | Hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed by Engineer-in-Charge.. |
| 15 | Cutting chases in stone wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc 10 cm girth and complete all as specified and directed by Engineer-in-Charge. |
| 16 | Installation of rebar by using Hilti hammer drill with carbide drill bit,chemical dispensing gun for inserting and using injection mortar chemical RE 500 V3 or equivalent upto minimum depth of (10 x dia of bar) as in chajja,beam,lintel,column slab and parapet at any height before inserting an anchor bar.Hole must be free from dust debris,water,oil grease complete all as per manufacturers instructions (upto 6th floor ) complete all as specified and directed by Engineer-in-Charge.Note :- (i) Reinforcement shall be measured and paid separately.(ii) Rates are inclusive of form work and safety measures.(iii) Dia of bar 10/12 mm(iv) Rates are inclusive of injection mortar chemical |
| 17 | Drilling holes of suitable size for passing tubes of any description into or through RCC cooking platform slab with stone or brick wall and the like of thickness not exc 250 mm by electric drilling machine .Hole must be free from dust debris,water,oil grease complete |
| 18 | 75 mm thick, cement concrete type C-2, 1:3:6 using 40 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, complete all as specified.Plinth protection shall be laid in 1:20 slope and joint filling sealed with bituminous sealing compound grade \\"A\\" . |
| 19 | 25 mm thick Cement concrete (1:2:4) type B-0,using 12.5 mm graded mechanically crushed stone aggregate as in levelling concrete etc. complete all as specified and directed by Engineer-in-Charge. |
| 20 | 100mm thick Plain cement concrete (1:4:8) type D-2,using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge. |
| 21 | Reinforced Cement Concrete nominal mix 1:2:4 type b-1 using 20mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge. |
| 22 | Machine cut Kota stone slab flooring 40-50mm thick,SIZE 55 CM x 55 cm laid over & including 15 mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed by Engineer-in-Charge. |
| 23 | Machine cut Kota stone slab 20 mm thick as in skirting, dado and pillars etc , laid over & including 10 mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed by Engineer-in-Charge. |
| 24 | Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves inncluding supports, overhangs, etc. also splays between floors and beams, etc. (rough finished flat surfaces of concrete), complete all as specified and directed by Engineer-in-Charge. |
| 25 | Brick work with fly ash bricks, class designation 100, old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 26 | Preparing the exposed masonry surface by thorough cleaning, wetting and application of waterproofing primer using Dr. fixit Dampguard/ Dr. Fixit primeseal or equivalent approved product, applied in one uniform coat on damp surface as per manufacturer's specification, complete all as specified and directed. |
| 27 | Rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick or concrete surfaces etc mixed with water proofing compound finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.NOTE: Water proofing compound shall be measured and paid separately. |
| 28 | Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces etc finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 29 | Glazed ceramic digital coloured /printed tiles 600 x 300 x 7mm thick on vertical surface such as skirting , dado etc. over and including 15 mm thick rendering in CM 1:4 thick set and jointed with 4 mm spacer and grouting the joint of flooring with epoxy grout mix of organic coated filler of desired shade,hardener ,resin in the ratio of 8:1:2 complete all as specified and directed by Engineer-in-Charge. |
| 30 | Vitrified ceramic tiles ultra charged 10 mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.0 Sqm, in floor,skirting etc set and jointed with 4 mm spacer and grouting the joint of flooring with epoxy grout mix of organic coated filler of desired shade,hardener ,resin in the ratio of 8:1:2 laid over and including 15mm thick screed bedding layer in CM (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 31 | Granite black shade, 16 mm thick, (table rubbed and polished) in single piece (in one direction) machine cut, machine polished, bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 20 mm thick (average thickness) cement mortar (1:4) screed, as in cooking platform, shelves, RCC counters, window cills & similar situations, complete all as specified and directed by Engineer-in-Charge. |
| 32 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws,hooks etc complete all as specified and as directed by Engr-in-charge.Colour to be decided by GE |
| 33 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws,hooks etc complete all as specified and as directed by Engr-in-charge.Colour to be decided by GE |
| 34 | Material and labour for 18 mm thick BWP (Boiling water proof) marine plywood conforming to IS: 710, bonded with undiluted phenol formaldehyde resin for room cupboard/ kitchen cupboard including under-counter and overhead storage units. The carcass (framework) and shutters shall be fabricated. all internal/ external surfaces both side of plywood to be finished with 0.8 to 1mm thick high-pressure decorative coloured sunmica laminate including adhesive (fevicol marine) and all necessary materials complete all as specified and directed. |
| 35 | Provding and fixing 2mm thick 16 to 19mm wide PVC edge binding rape of approved quality for cupboard / wardrobe shutters including necessary synthetic resin hot pressed to edge on binding machine etc. complete all as sepcified and directed. |
| 36 | Factory made box type steel windows with pressed steel frame min 1.25 thick complete including mild steel acessories like lugs, door stopper, holdfasts, pintol hinges, handles( minimum One for each shutter), and ISI marked tower bolt 150mm size (minimum 2 for each shutter) etc. with glazing bars and without glazing bars (Double shutter) dovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-276(R), Sheet No 1/4 to 2/4, 3/4, 4R/4 and as specified and directed by Engineer-in-Charge.Note: (i) Fabrication as per TD-276 (R) SH 1/4 to 2/4, 3/4, 4 (R) /4(ii)Mode of measurement Unit will be for the complete window except Glass/ Gauge but incl fittings, ISI marked iron mongery complete as per TD. (iii) The PCC back filling in chowkhat of window, Grills,Sheet glass and wire gauge will be measured and paid separately against respective items. |
| 37 | TMT mild steel bars 10mm dia and over, of grade Fe-500D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply and fixed Fe 410-W (Gde E- 250) of IS : 4923:1997 quality A Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 39 | Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats et conforming to Fe-410 W(Gde E-250) of IS : 4923:1997 quality B complete all as specified and directed by Engineer-in-Charge. |
| 40 | Preparation of new or previously untreated steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 41 | Preparation of surfaces of walls brooming down, applying one coat of white cement based wall care putty after applying emery paper or sand paper and two coats of weather proof emulsion paint(Ist quality) Apex (internal/ external wall surfaces over a coat of primer damp shealth per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge. |
| 42 | Preparation of new plastered surfaces of wall and applying two coats of interial acrylic emulsion paint on walls over and including a coat of primer and 2 mm wall care putty including preparation of surface complete all as specified and directed. |
| 43 | Preparation of plastered or unplastered new surfaces of wall and applying three coats of white wash including preparation of surface complete all as specified and directed by Engineer-in-Charge. |
| 44 | Steel rolling shutters , (with lath thickness 1.25 mm ) with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and , erected in position as indicated, complete push pull or manual type gear operated type with bevel gear box and crank handle complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply and fixing Ball bearing suitable for rolling shutter complete all as specified and directed. |
| 46 | Supply and fixing safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engineer-in-Charge. |
| 47 | Stainless steel soft closing heavy type innotech channels of approved make 500mm long with screws wtc. Complete all as specified and directed. |
| 48 | Stainless steel soft closing spring hinges at 0 degree hinges (daddo) (hydraulic type) of approved make/ brand to cupboard shutters with full threaded screws including making necessary recess in board and finished etc. complete all as specified and directed. |
| 49 | 200 mm long fancy type brass handle, D type extruded Aluminium alloy handles powder coated fabricated type complete all as specified and directed by Engineer-in-Charge. |
| 50 | 304 grade stainless steel modular kitchen basket and accessorices such as right angle basket (plain cup & saucer, plant, partition, bottle rack, thali, cutlerry) kitchen utensil basket, dinner set basket, kitchen grain basket, multipurpose basket as per site requirment including finishing (wherever required) and fittings. the same shall be fixed with necessary stainless steel nuts & bolts, stainless steel screws & telescopic channel etc. as per direction of engineer in charge.Note: for payment purpose only weight of stainless steel basket shall be considered excluding fixing accessories such as nuts, innotech channels, handle etc. |
| 51 | Kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washers and wastes couplig ;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm X 330mm X 160mm complete all as specified. |
| 52 | Supplying and fixing in repairs 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply and fixing 15mm bore angle cock/ stop valve cast copper alloy chromium plated fancy type, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 54 | Supply and fixing 15mm bore angle cock/ stop valve cast copper alloy chromium plated fancy type, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and as directed. Please Enable Macros to View BoQ information |
