|
| 1 | Item No.1:- Clearing the site before and after the construction. |
| 2 | Item No.2:- Excavation in hard rock of all toughness by blasting including boulders above 0.6 m dia. (0.113Cum) minimising damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling / pre-spliting / smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all materials, machinery, labour, levelling bed etc |
| 3 | Item No.3:- Excavation in hard rock of all toughness by Breaker including boulders above 0.6 m dia. (0.113Cum) minimising damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling / pre-spliting / smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all materials, machinery, labour, levelling bed etc |
| 4 | Item No.4:- Providing and laying in situ C.C. of grade M - 10 of trap / granite / gneiss / quartzite graded metal for foundation And Bedding with concrete Mixer including Placing compacting, curing etc.complete with initial lead of 1 kmand all lifts as directed (40 M.S.A.) |
| 5 | Item No.5:- Providing and laying in situ C.C. of grade M - 200 (1:1.5:3) of trap / granite / gneiss / quartzite graded metal, compacting, curing etc.complete with initial lead of 50 m. and lift 1.50 m. (40 M.S.A.) |
| 6 | Item No.6:- Providing and laying in position mild steel reinforcement including cutting, binding, bending including cost of reinforcement, binding wire etc. complete with a lead of 50 m. and lift 1.50 m. |
| 7 | Item No.7:- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without anticorrossive paint and over it two coats oil painting of approved quality and shade etc complete |
| 8 | Item No.8:- Mnufacturing with QAP and fabrication of KT weir needle gates - straight type size 2.15 x 0.5 M - 94Kg weight as per relevant Indian Standards with all material, Mild steel confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, 1Km lead Charges of Transportation, loading and unloading charges of Gate parts at site etc . |
| 9 | Item No.9:- Dewatering by pumping out water collected with 10 to 19 HP Disel / electrical pumps including cost of all materials, machinery, labour, providing sump and all other ancillary operations whenever necessary etc complete |
| 10 | Item No.10- Providing And Fixing Name Board As Per Details of Scheme etc complete |
| 11 | Item No.11- Royalty Chargs for Sand,Metal etc Material in this work etc complete |
| 12 | INSURANCE CHARGES Please Enable Macros to View BoQ information |
